Non-contact Air Holding Mechanism for Inspection of Pipe Inner Walls
スポンサーリンク
概要
- 論文の詳細を見る
Inspection of pipe inner wall is the most important problem for nuclear power plant. At present there are no non-contact holding technique for the inspection system. For that purpose, we are developing a non-contact inspection system. This paper describes a "first" prototype model of the holder using air pressure, and results of preliminary experiment on air pressure distribution, holding attitude and static holding stiffness. In prototype mechanisms, when the supplied air pressure was 1.2MPa the angle of inclination was within 1, and the holding stiffness was 2N/μm(air film thickness 100μm).
- 社団法人 日本原子力学会の論文
- 1998-12-25
著者
-
Ozawa Norimitsu
Mechanical Engineering Laboratory
-
Akedo Jun
Mechanical Engineering Laboratory A.i.s.t M.i.t.i.
-
Mizuhara K
Aist Miti Ibaraki Jpn
-
Akedo Jun
Mechanical Engineering Laboratory Agency Of Industrial Science And Technology
-
MIZUHARA Kiyoshi
Mechanical Engineering Laboratory, Agency of Industrial Science and Technology
-
SEIMIYA Koichi
Mechanical Engineering Laboratory, Agency of Industrial Science and Technology
-
Ozawa N
Aist Miti Ibaraki Jpn
-
Seimiya Koichi
Mechanical Engineering Laboratory Agency Of Industrial Science And Technology
-
Mizuhara Kiyoshi
Mechanical Engineering Laboratory
関連論文
- Patterning Properties of Lead Zirconate Titanate (PZT) thick Films Made by Aerosol Deposition
- Development of a New Measurement Method of Central Position of Spindle Rotation : 1st Report : Steel Ball Method
- X-Ray Diffraction and Scanning Electron Microscopy Observation of Lead Zirconate Titanate Thick Film Formed by Gas Deposition Method
- Deposition and Patterning Technique for Realization of Pb(Zr_, Ti_)O_3 Thick Film Micro Actuator
- New Molding Technique Using Ultra-fine Particles for Realization of Three Dimensional Micro Structure (特集:MEMS技術)
- Actuation Properties of Lead Zirconate Titanate Thick Films Structured on Si Membrane by the Aerosol Deposition Method
- Microstructure and Electrical Properties of Lead Zirconate Titanate (Pb(Zr_/Ti)O_3) Thick Films Deposited by Aerosol Deposition Method
- Non-contact Air Holding Mechanism for Inspection of Pipe Inner Walls
- Effect of Circular Groove on Flatness Error of a Metal Mirror Caused by Clamping Force
- Estimation of Thermal Contact Resistance Based on Electrical Contact Resistance Measurements
- Application of Gas Jet Deposition Method to Piezoelectric Thick Film Miniature Actuator