Cu/Co系ナノグラニュラーバルク材料のナノ組織
スポンサーリンク
概要
- 論文の詳細を見る
Nano-granulation process of Cu/Co system is investigated on the route of bulk mechanical alloying. Using the bulk mechanical alloying, the super-satu rated solid solution of Cu-20mol%Co has been prepared. Through the further h eat treatment, the Co nano-precipitated from the super-saturated solid solut ion in the copper matrix, resulting in appearance of the giant magneto-resis tance. In the present study, the nano-precipitation of Co and the Co-particu late size is investigated by XRD, VSM and TEM. The relationship between the magneto-resistance ratio and the nano-precipitation process of Co is investi gated. This relation depends on both the nucleation rate of Co-cluster preci pitate and the growth rate of Co-cluster. The change of the magneto-resistan ce ratio with the Co-cluster size is also obtained: Co precipitate size mus t be 1-3 nm to attain higher magneto-resistance ratio than 10%.
- 社団法人 粉体粉末冶金協会の論文
- 1998-12-15
著者
関連論文
- Texture を考慮した焼結鉱の強度・剛性解析
- ユニットセルモデルによるポーラス体の強度・剛性解析
- マルチレベルモデリングによる実組織を考慮した高温損傷評価
- 黄銅板のしごき加工における界面活性剤を添加した水の潤滑性
- マグネシウム合金およびその複合材料における超塑性を可能にする材料プロセス
- Bi-Te系熱電材料のせん断付加押し出し
- バルクMAにより創製される(Bi_2Te_3)_(Sb_2Te_3)_熱電材料特性のプロセス依存性
- 制御破砕成形法開発の12年間と将来展望 (第2報 : バルクメカニカルアロイングへの展開)
- 制御破砕成形法開発の12年間と将来展望 (第1報 : 制御破砕成形法の開発)
- ワイヤロープより線機による実験的検証-ワイヤロープ設計/加工のためのCAE開発第3報-
- ワイヤロープ加工解析システムの開発(解析手法とストランド成形計算)
- 弾塑性有限要素法によるロープ成形シミュレーション -ワイヤーロープ設計/加工のためのCAE開発II-
- 解析手法の提案と厳密解による検証 - ワイヤロープ設計/加工のためのCAE開発 第1報 -
- 複数モードの弾性表面波による異方性弾性定数の同定
- 弾性表面波による多層コーティング薄膜の膜厚評価 -第2報 : 実験的検証-
- 焼結解析のためのマルチレベルモデリング
- 転位の運動学に基づいた数値結晶塑性解析による単結晶の変形のモデリング
- 弾性表面波による多層コーティング薄膜の膜厚評価 -第1報 : 逆解析手法の適用-
- マクロ-ミクロ連成モデルによる常圧/加圧焼結プロセス解析
- Mg_2Siの固相合成に及ぼす粉体特性および圧粉条件の影響
- 純マグネシウムの室温変形挙動における結晶粒界の役割
- 1147 粉末冶金法によるマグネシウム合金の低フリクション化のための材料設計
- Mechanical Properties of Mg_2Si/Mg Composites via Powder Metallurgy Process
- In-situ Synthesis of Mg_2Si Intermetallics via Powder Metallurgy Process
- Magnesium Matrix Composite with Solid-state Synthesized Mg-2Si Dispersoids
- Tribological Properties of Magnesium Composite Alloy with In-situ Synthesized Mg_2Si Dispersoids
- マイクロ・セルラー材料製造に向けて
- 超軽量構造への挑戦 : ユニットセル設計からの機能展開
- Al/Ni混合粉末の半溶融加工で作製した金属間化合物とその高温強度特性
- A Novel Process to Form Al-12mass%Si Bulk Material from Machined Chips using Bulk Mechanical Alloying
- 粉末冶金法によるマグネシウム基複合材料の創製とその特性
- Solid-State Recycle Processing for Magnesium Alloy Waste via Direct Hot Forging
- Solid State Recycling of Recyclable Aluminum Wastes with In-Process Microstructure Control
- AI/Ni混合粉末の等速加熱にともなう金属間化合物の生成とその成形
- 環境適合型マニュファクチュアリングシステムへの転換とエコマテリアル
- 207 Consolidation of Al-Ni-Zr amorphous alloy powder made by double mechanical alloying and its microstructure and mechanical properties
- 205 Mechanical Properties of Mg_2Si/Mg Composites via Powder Metallurgy Process
- 座談会「応用数理と私」
- マグネシウム合金AZ91圧延材の結晶粒微細化と超塑性
- Advanced Plasma Nitriding for Aluminum and Aluminum Alloys
- Feasibility of Plasma Nitriding for Effective Surface Treatment of Pure Aluminum
- Plasma Nitriding of Cold-pressed and BMA-forged Al Compacts (特集 アルミニウム粉末合金とその応用事例)
- Surface modification of in-process refined aluminum alloy by morphology-free processing
- ワイヤロープ設計/加工解析システムの開発
- 計算力学国際会議ICES'91印象記(学術会合報告・国際会議)
- New Step of Ecomaterial to Break through the Barrier between Ecomaterial-Selection and Eco-Design
- Barrier-Free Processing of Materials for Environmentally Benign Life-Cycle Design
- 爆薬のデトネーションによる材料合成
- Effect of Cell Size on the Dynamic Compressive Properties of Open-Celled Aluminum Foams
- マルチレベルモデリングによる焼結プロセスシミュレーション
- マイクロ・セルラ材料製造プロセスの提案
- マグネシウム合金の超塑性
- MoSi_2-SiC ウイスカー複合体の反応成形
- Chemical Modification of Titanium Nitride Films via Ion Implantation
- Self-Lubrication of Cl-Implanted Titanium Nitride Coating for Dry Metal Forming
- Formation of Protection Layer during Oxidation of Al-Implanted TiN Coating
- WS-8 衝撃反応合成における材料科学とその展開(WS(3), 衝撃エネルギー科学の深化と応用)
- 振動・液圧絞り加工法の開発
- Solid State Synthesis of Non-Equilibrium Phase in Mg-Co and Mg-Fe Systems via Bulk Mechanical Alloying
- Resintered Microstructure Dependence of Mechanical Properties of Almina Wrie Processed by Controlled Fracture Forming
- Grain Growth Behavior of Alumina Compact Processed by Controlled Fracture Forming
- Resintering Behavior of Alumina Compact on the Route of Controlled Fracture Forming
- Effects of the Density on Compressive Properties in Cellular Aluminum Produced by the Sintering Method
- The Grain Size and Texture Dependence of Tensile Properties in Extruded Mg-9Al-lZn
- Forging Characteristics of AZ31 Mg Alloy
- Bi-Al, Pb-Alなどの均質混合体作成へのバルクMAプロセスの応用
- 粒子系モデルによる磁場中粉体成形解析
- 表面波による微小領域の異方性評価 : 弾性異方性評価のための超音波反射率測定法の適用に関する基礎的研究
- 粒状体モデルによる焼結解析
- 超音波スペクトロスコピーによるセラミックコーティングの非破壊定量評価
- 表面波スペクトロスコピーに基づく逆解析による薄膜特性評価に関する検討
- 超音波反射率測定に基づくスペクトロスコピー法による材料表面層の超音波減衰評価
- 表面波による微小領域の非破壊材料評価 : 超音波反射率測定による熱処理鋼の表面波速度の定量的評価
- バタフライ孔型系における山形鋼材圧延の変形特性解析
- Mg_2NiのBMAによる非平衡/ナノ結晶化と水素吸蔵特性
- 単体パラディウムのBMAとその水素吸蔵特性
- Non-Equilibration of Nanostructured Mg_2Ni by Bulk Mechanical Alloying
- Mg_2Ni 水素吸蔵合金のアルカリ水溶液中での挙動
- バルクMAによるMg_2Ni合金の創成
- Microstructure and Mechanical Properties of a Rolled Ti-Si-B Alloy
- Effects of Magnesia Particle Addition on Mechanical and Bioactive Properties of Magnesia/Titanium Composite
- Improvement of Crashworthiness in Ultra Lightweight Metallic Foam by Heat-Treatment for Microstructural Modification of Base Material
- 204 Solid-State Synthesis of Mg_2Si Intermetallic Compound via Powder Metallurgy Process
- Solid-State Synthesis of Mg_2Si from Mg-Si Mixture Powder
- 高性能マグネシウムの新展開 - 文部科学省科学研究費特定領域研究(B)の概要 -
- 622 固相合成プロセスにより作製したMg基複合材料の特性(ワークショップ 粉末成形・焼結の最前線)
- 605 混合粉末における金属間化合物Mg_2Snの反応生成挙動(OS 粉末加工)
- AZ91Dマグネシウム合金チップの固相リサイクルプロセス
- K-1018 軽量合金微細化のための温間バルクメカニカルアロイング(S12-3 粉末成形とその評価(3))(S12 粉末成形とその評価)
- K-1017 破壊・損傷を考慮した粉体成形シミュレーション(S12-3 粉末成形とその評価(3))(S12 粉末成形とその評価)
- 回生材料からアルミ合金への高効率固相リサイクル
- プラズマ窒化によるFe-Cr合金の組織及び硬さ傾斜の制御
- Gas Nitriding of Magnesium-Titanium Alloys Fabricated by Bulk Mechanical Alloying
- Effects of Heat Treatment on the Compressive Properties of AZ91 Mg Foam
- Microstructure and Tensile Properties of Rolled Mg-5.5 mass% Zn-0.6 mass% Zr Alloy
- Effects of Cell Geometry on the Compressive Properties of Nickel Foams
- Cu/Co系ナノグラニュラーバルク材料のナノ組織
- 非圧縮性を考慮した平面ひずみ条件下の線形および非線形き裂解析
- 応用の新しい動向 マグネシウム製人工骨の可能性 (特集 マグネシウム合金の最新の動向(2))
- 連続引抜型圧延機による冷間圧延特性および温度上昇