205 Mechanical Properties of Mg_2Si/Mg Composites via Powder Metallurgy Process
スポンサーリンク
概要
- 論文の詳細を見る
The mechanical properties of the solid-state synthesized Mg_2Si/Mg composites from the mixed Mg-Si powders have been investigated. Results indicate the macro-hardness (HRE) and the tensile strength of the composites increase with increasing the Si content and decreasing the Si size. The particle size of the synthesized Mg_2Si depends on the initial Si size; the mechanical properties of the Mg_2Si/Mg composite are therefore remarkably improved by using fine Si particles or by decreasing the grain size of Mg matrix grains via bulk mechanical alloying process.
- 社団法人日本機械学会の論文
著者
-
相澤 龍彦
東京大学国際・産学共同研究センター
-
MURAMATSU Hiroshi
Graduate School, Musashi Institute of Technology
-
KONDOH Katsuyoshi
Research Center for Advanced Science and Technology (RCAST), University of Tokyo
-
YUASA Eiji
Faculty of Engineering, Musashi Institute of Technology
-
AIZAWA Tatsuhiko
Research Center for Advanced Science and Technology, University of Tokyo
-
Aizawa Tatsuhiko
Research Center For Advanced Science And Technology The University Of Tokyo
-
相澤 龍彦
東大 国際・産学共同研究セ
-
Kondoh Katsuyoshi
Research Center For Advanced Science And Technology
-
Muramatsu Hiroshi
Research Laboratory For Advanced Technology Seiko Instruments Inc.
-
Muramatsu Hiroshi
Graduate School Musashi Institute Of Technology
-
Yuasa Eiji
Faculty Of Engineering Musashi Institute Of Technology
-
Asahina T
Chubu Center National Institute Of Advanced Industrial Science And Technology (aist)
-
YUASA Eiji
Musashi Institute of Technology
-
AIZAWA Tatsuhiko
Research Center for Advanced Science and Technology
関連論文
- Texture を考慮した焼結鉱の強度・剛性解析
- ユニットセルモデルによるポーラス体の強度・剛性解析
- マルチレベルモデリングによる実組織を考慮した高温損傷評価
- マグネシウム合金およびその複合材料における超塑性を可能にする材料プロセス
- Bi-Te系熱電材料のせん断付加押し出し
- 制御破砕成形法開発の12年間と将来展望 (第2報 : バルクメカニカルアロイングへの展開)
- 制御破砕成形法開発の12年間と将来展望 (第1報 : 制御破砕成形法の開発)
- ワイヤロープより線機による実験的検証-ワイヤロープ設計/加工のためのCAE開発第3報-
- ワイヤロープ加工解析システムの開発(解析手法とストランド成形計算)
- 弾塑性有限要素法によるロープ成形シミュレーション -ワイヤーロープ設計/加工のためのCAE開発II-
- 弾性表面波による多層コーティング材料の膜厚同定
- 超音波信号に基づく逆解析による異方性材料の弾性定数同定に関する検討
- Mg_2Siの固相合成に及ぼす粉体特性および圧粉条件の影響
- 純マグネシウムの室温変形挙動における結晶粒界の役割
- 1147 粉末冶金法によるマグネシウム合金の低フリクション化のための材料設計
- Mechanical Properties of Mg_2Si/Mg Composites via Powder Metallurgy Process
- In-situ Synthesis of Mg_2Si Intermetallics via Powder Metallurgy Process
- Magnesium Matrix Composite with Solid-state Synthesized Mg-2Si Dispersoids
- Tribological Properties of Magnesium Composite Alloy with In-situ Synthesized Mg_2Si Dispersoids
- マイクロ・セルラー材料製造に向けて
- 超軽量構造への挑戦 : ユニットセル設計からの機能展開
- Al/Ni混合粉末の半溶融加工で作製した金属間化合物とその高温強度特性
- A Novel Process to Form Al-12mass%Si Bulk Material from Machined Chips using Bulk Mechanical Alloying
- 粉末冶金法によるマグネシウム基複合材料の創製とその特性
- Solid-State Recycle Processing for Magnesium Alloy Waste via Direct Hot Forging
- Solid State Recycling of Recyclable Aluminum Wastes with In-Process Microstructure Control
- AI/Ni混合粉末の等速加熱にともなう金属間化合物の生成とその成形
- 環境適合型マニュファクチュアリングシステムへの転換とエコマテリアル
- 207 Consolidation of Al-Ni-Zr amorphous alloy powder made by double mechanical alloying and its microstructure and mechanical properties
- 205 Mechanical Properties of Mg_2Si/Mg Composites via Powder Metallurgy Process
- イオン注入した工具によるドライ加工
- 塩素イオン注入した窒化チタン被覆工具のステンレス鋼切削における性能
- 塩素イオン注入した窒化チタン膜の機械的性質
- 窒化チタン膜の摩擦挙動に及ぼすハロゲンイオン注入の影響
- マグネシウム合金AZ91圧延材の結晶粒微細化と超塑性
- Advanced Plasma Nitriding for Aluminum and Aluminum Alloys
- Feasibility of Plasma Nitriding for Effective Surface Treatment of Pure Aluminum
- Plasma Nitriding of Cold-pressed and BMA-forged Al Compacts (特集 アルミニウム粉末合金とその応用事例)
- Surface modification of in-process refined aluminum alloy by morphology-free processing
- ワイヤロープ設計/加工解析システムの開発
- New Step of Ecomaterial to Break through the Barrier between Ecomaterial-Selection and Eco-Design
- Barrier-Free Processing of Materials for Environmentally Benign Life-Cycle Design
- Effect of Cell Size on the Dynamic Compressive Properties of Open-Celled Aluminum Foams
- マルチレベルモデリングによる焼結プロセスシミュレーション
- イオン・インプランテーション技術の表面改質プロセスへの展開
- マイクロ・セルラ材料製造プロセスの提案
- マグネシウム合金の超塑性
- MoSi_2-SiC ウイスカー複合体の反応成形
- Chemical Modification of Titanium Nitride Films via Ion Implantation
- Self-Lubrication of Cl-Implanted Titanium Nitride Coating for Dry Metal Forming
- Formation of Protection Layer during Oxidation of Al-Implanted TiN Coating
- WS-8 衝撃反応合成における材料科学とその展開(WS(3), 衝撃エネルギー科学の深化と応用)
- Solid State Synthesis of Non-Equilibrium Phase in Mg-Co and Mg-Fe Systems via Bulk Mechanical Alloying
- Resintered Microstructure Dependence of Mechanical Properties of Almina Wrie Processed by Controlled Fracture Forming
- Grain Growth Behavior of Alumina Compact Processed by Controlled Fracture Forming
- Resintering Behavior of Alumina Compact on the Route of Controlled Fracture Forming
- Effects of the Density on Compressive Properties in Cellular Aluminum Produced by the Sintering Method
- The Grain Size and Texture Dependence of Tensile Properties in Extruded Mg-9Al-lZn
- Forging Characteristics of AZ31 Mg Alloy
- Scanning Near-Field Optical/Atomic Force Microscopy for Fluorescence Imaging and Spectroscopy of Biomaterials in Air and Liquid : Observation of Recombinant Escherichia coli with Gene Coding to Green Fluorescent Protein
- Observation of Topography and Optical Image of Optical Fiber End by Atomic Force Mode Scanning Near-Field Optical Microscope
- Scanning Near-field Fluorescence Microscopy and Nanoscopic Fluorescence Spectroscopy in Combination with a Non-contact Scanning Force Microscope
- Mg_2NiのBMAによる非平衡/ナノ結晶化と水素吸蔵特性
- 単体パラディウムのBMAとその水素吸蔵特性
- Non-Equilibration of Nanostructured Mg_2Ni by Bulk Mechanical Alloying
- Mg_2Ni 水素吸蔵合金のアルカリ水溶液中での挙動
- バルクMAによるMg_2Ni合金の創成
- Microstructure and Mechanical Properties of a Rolled Ti-Si-B Alloy
- Effects of Magnesia Particle Addition on Mechanical and Bioactive Properties of Magnesia/Titanium Composite
- A Self-Sensitive Probe Composed of a Piezoelectric Tuning Fork and a Bent Optical Fiber Tip for Scanning Near-field Optical/Atomic Force Microscopy
- Environmentally Benign Fabricating Process of Magnesium Alloy by Cyclical Plastic Working in Solid-State
- Innovative Reuse of Agricultural Wastes as Industrial Raw Materials to Form Magnesium Composites
- Improvement of Crashworthiness in Ultra Lightweight Metallic Foam by Heat-Treatment for Microstructural Modification of Base Material
- Fabrication of SUS304 Regularly Cell-Structured Material and Their Mechanical Properties
- Crystal Structure Formed in Mechanical Alloying Process of Mg-Al-Zn Powder Mixture Using Magnesium Alloy Machined Chips(Recent Advances in Materials and Processing (I))
- Mg_2Si Coating Technology on Magnesium Alloys to Improve Corrosion and Wear Resistance
- Surface Modification of Magnesium Alloy by Mg_2Si Coating Technology(Recent Advances in Materials and Processing (I))
- 204 Solid-State Synthesis of Mg_2Si Intermetallic Compound via Powder Metallurgy Process
- Solid-State Synthesis of Mg_2Si from Mg-Si Mixture Powder
- Critical Issues in Promotion of Environmentally Benign Manufacturing and Materials Processing
- 高性能マグネシウムの新展開 - 文部科学省科学研究費特定領域研究(B)の概要 -
- Breakaway Behavior of Surface Oxide Film on Aluminum-Sillicon-Magnesium Alloy Powder Particles at High Temperature in a Vaccuum
- Influence of Compacting Temperature in Vacuum Hot Pressing on the Microstructure and Mechanical Properties of Al-Ni-Zr Amorphous Alloys Prepared by Mechanical Alloying
- Compactibility of Al-Ni-Zr Amorphous Powder Produced by the Mechanical Alloying Method
- Formation of Mg_2Si/MgO/Mg Composites by Using Wasted Glasses
- In-Situ Synthesis of Ti Matrix Composite Reinforced with Dispersed Ti_5Si_3 Particles via Spark Plasma Sintering
- New Process to Fabricate Magnesium Composites Using SiO_2 Glass Scraps
- Gas Nitriding of Magnesium-Titanium Alloys Fabricated by Bulk Mechanical Alloying
- Precipitation of Magnesium Apatite on Pure Magnesium Surface during Immersing in Hank's Solution
- Effects of Heat Treatment on the Compressive Properties of AZ91 Mg Foam
- Microstructure and Tensile Properties of Rolled Mg-5.5 mass% Zn-0.6 mass% Zr Alloy
- Effects of Cell Geometry on the Compressive Properties of Nickel Foams
- Computational Study of Compressive Mechanical Response in Two-dimensional Cellular Solids under Microstructural Control
- PREFACE
- Mechanical properties of grain-refined AZ91 and Al-12mass%Si alloys produced from chips by bulk mechanical alloying
- Morphology-Free Processing of Magnesium Alloys
- PREFACE
- Crystallographic Anisotropy Control of n-type Bi-Te-Se Thermoelectric Materials via Bulk Mechanical Alloying and Shear Extrusion
- Environmentally Benign Manufacturing of Automotive Parts via Powder Metallurgy
- Solid-state recycle processing of light alloys