スポンサーリンク
The Iron and Steel Institute of Japan | 論文
- Dissolution rate of burnt dolomite in molten FetO-CaO-SiO2 slags.
- The behavior of metal jet in the in-rotating-water spinning method.
- Microstructures and Mechanical Properties of TiAl/Ti2AlC Composites Prepared by Pulsed-Electric Current Sintering.
- Evaluation of the service life of galvanized steel sheet coated with polyvinyl chloride resin.
- Effect of CO and CO2 Content in Suction Gas on Sintering Process for Iron Ores
- Prediction and suppression of slopping in the converter.
- Flow analysis during solidification by the direct finite difference method.
- Mechanical Properties and Aqueous Corrosion Behaviour of the Ferritic Fe-Cr-V Alloys.
- Delaminating Crack Paths in Ultrafine, Elongated Ferritic Steel
- Development of Air-atomizing Mist Nozzles and Mist Cooling System for Continuous Casting
- Finite Element Investigation for Edge Wave Prediction in Hot Rolled Steel during Run Out Table Cooling
- Recent advances in blast furnace ironmaking technology in Australia.
- The effect of volume fractions of .ALPHA. and .BETA. phases in Ti-Al-V alloys on the superplastic behavior.
- Interfacial resistance to nitrogen desorption from molten iron.
- An Analysis of the Cr-Fe-Mo-C System and Modification of Thermodynamic Parameters.
- Solidification Phenomena during Horizontal Continuous Casting with Oscillating Mould
- Permeation Characteristics and Void Structure of Iron Ore Sinter Cake.
- X-ray diffractometric measurement of lattice misfit between .GAMMA. and .GAMMA.' phase in Ni-base superalloys.
- Production of formable TS980MPa grade cold-rolled steel.
- Iron Droplet Formation Due to Bubbles Passing through Molten Iron/Slag Interface.