Dissolution rate of burnt dolomite in molten FetO-CaO-SiO2 slags.
スポンサーリンク
概要
- 論文の詳細を見る
Cylinders of burnt dolomite with the apparent porosities of 20 to 35% were immersed into molten FetO-CaO-SiO2 slags at temperatures of 1350 to 1425°C and rotated at 100 to 400rpm. The dissolution rates were determined by measuring the decrease in radius of cylinder.The dissolution rate increased with increases in temperature and revolutional speed of cylinder, but was not affected by the difference in apparent porosity of burnt dolomite. From the analysis of experimental results, it was concluded that the dissolution rate was controlled by the mass transport of CaO in burnt dolomite for low FetO slag (slag A) and that of MgO for other slags in the boundary layer of molten slag. Mass transport coefficients calculated were in the range of 4.7×10-4 to 1.7×10-3cm/s at 1400°C.It was found that the burnt dolomite after the experiment was widely covered with (Fe, Mg) O solid solution in the case of high FetO slag.
- The Iron and Steel Institute of Japanの論文
The Iron and Steel Institute of Japan | 論文
- The Evolution of Precipitates in Nb-Ti Microalloyed Steels during Solidification and Post-solidification Cooling
- Short Contribution to the Study of the Washing Effect in Electromagnetic Stirrers for Continuous Casting
- Nitrogen Bearing Martensitic Stainless Steels : Microstructure and Properties
- A Two-dimensional Finite Element Thermomechanical Approach to a Global Stress-Strain Analysis of Steel Continuous Casting
- Transformation Behavior and Microstructures in Ultra-low Carbon Steels