Property of Composite Ceramics Composed of Single Crystals and Ceramic Matrix Using Hybrid Sintering
スポンサーリンク
概要
- 論文の詳細を見る
In a former study, the authors applied a hybrid process of microwave heating and hot pressing to the fabrication of ceramic composites from small single-crystal grains and powder of a relaxor-type material. The microstructure of the sintered ceramic composite shows that the hybrid sintering process generates a better boundary state between the single crystals and the ceramic matrix than the conventional sintering process using resistance heating. In this study, the performance of the fabricated ceramic composite was investigated by measuring stress induced by a DC field. The result shows that the generated stress of the ceramic composite fabricated by the hybrid sintering process (approximately 86 MPa) is approximately four times larger than that of conventionally sintered ceramic composites (24 MPa) under the same DC field.
- Published by the Japan Society of Applied Physics through the Institute of Pure and Applied Physicsの論文
- 2003-09-15
著者
-
Qiu Jinhao
Institute Of Fluid Science Tohoku University
-
Tani Junji
Institute Of Fluid Science Tohoku University
-
TAKAHASHI Hirofumi
Fuji Ceramics Cooperation
-
Qiu Jinhao
Institute of Fluid Science, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan
-
Sukigara Toru
Wako Research Center, HONDA R&D Co., Ltd., 1-4-1 Chuo, Wako-shi, Saitama 351-0193, Japan
-
Tukamoto Shintaro
Fuji Ceramics Corporation, 2320-11 Yamamiya, Fujinomiya, Shizuoka 418-0111, Japan
関連論文
- Hysteresis cancellation using self-sensing actuation in a multistack actuator
- Comparison of active, semi-passive and passive noise isolation of a plate bonded with piezoelectric elements
- A Study on the Wing Structure and Flapping Behavior of a Dragonfly
- Effect of Boundary Conditions on the Stability of a Cantilever Pipe Discharging and Aspirating Fluid
- A Strip Element Method for Bending Analysis of Orthotropic Plates
- Compressive Properties of Ni_2MnGa Produced by Spark Plasma Sintering
- Phase Transformation of Ni_2MnGa Made by the Spark Plasma Sintering Method
- Effect of Grinding Stress on the Phase Transformation of Ni_Mn_Ga Powder
- Properties of piezoelectric ceramic sheets fabricated by doctor blade
- Suppression of T-S Wave Using Wall Motion Actuator
- The Wing Apparatus and Flapping Behavior of Hymenoptera
- Wing Morphology of Some Insects
- Digital Active Vibration Control of a Cantilever Beam with Piezoelectric Actuators
- An Exact Method for Analyzing Elastic Waves in Anisotropic Media Excited by Harmonic Line Loads
- A New Technique for Analyzing the 3-D Wave Fields in Anisotropic Laminates Excited by Point Harmonic Loads
- Strip Element Method for Characterization of Flaws in Sandwich Plates
- MULTI-MODAL VIBRATION CONTROL OF SMART COMPOSITE PLATES
- SELF-SENSING MAGNETIC FORCE CONTROL BY COMPOSITE OF GIANT MAGNETOSTRICTIVE AND PIEZOELECTRIC MATERIALS
- Lead-Free Barium Titanate Ceramics with Large Piezoelectric Constant Fabricated by Microwave Sintering
- Properties of Lead Zirconate Titanate Ceramics Determined Using Microwave and Hot-Press Hybrid Sintering Process
- Property of Lead Zirconate Titanate Actuator Manufactured with Microwave Sintering Process
- Increased Regional Systolic Myocardial Stiffness of the Left Ventricle during Coronary Artery Occlusion in a Dog : Analysis of the Finite Element Model
- Precursor Effect on Hydrothermal Synthesis of Sodium Potassium Niobate Fine Particles and Their Piezoelectric Properties
- Changes in Ferroelectric Domain Structure with Electric Fatigue in Li0.06(Na0.5K0.5)0.94NbO3 Ceramics
- Synthesis of Bismuth Sodium Titanate Fine Particles with Different Shapes by the Gel-Sol Method
- Effects of Microwave and Hot-Press Hybrid Sintering on Microstructure and Piezoelectric Properties of 0.24Pb(Zn_3Nb_)O_3・0.384PbZrO_3・0.376PbTiO_3 Ceramics
- Dynamic Behavior of a Liquid in a Cylindrical Container Subject to Horizontal Vibration : Liquid Surface Response in an Elastic Container Subject to Vibration with Higher Frequencies
- Simultaneous Structure-Control Optimization of a Steering Wheel for Vibration Suppression
- Development of High-Performance Piezoelectric Ceramic Actuators
- Fabrication and Applications of Piezoelectric Ceramic Fibers with a Metal Core(International Workshop on Smart Materials and Structural Systems, W03 Jointly organized by Material & Processing Division, Material & Mechanics Division, Dynamics & Control Div
- Static Behavior of a Pipe String Designed for Mining Manganese Nodules
- Size-Controlled Hydrothermal Synthesis of Bismuth Sodium and Bismuth Potassium Titanates Fine Particles and Application to Lead-Free Piezoelectric Ceramics
- Hydrothermal Synthesis of Sodium and Potassium Niobates Fine Particles and Their Application to Lead-Free Piezoelectric Material
- Simultaneous Optimization of a Flexible Robot Arm
- 156 セルフセンシングアクチュエータを用いた制御システムの時間遅れによる安定性の解析
- Hydroelastic Instability of Infinitely Long Magnetoelastic Plates
- Emergence of the Rhythmic Movement of a Dragonfly Wing Model
- The Free Vibration of Free-Clamped Fluid-Coupled Coaxial Cylindrical Shells : Series C : Vibration, Control Engineering, Engineering for Industry
- Shear-Mode Industrial Inkjet Head Using Lead-Free Piezoelectric Ceramics
- Active control of noise transmission through a plate using embedded self-sensing piezoelectric actuators
- Active Flutter Suppression of a Vertical Pipe Conveying Fluid
- Fabrication of Ceramic Composite Composed of Single Crystals and Ceramic Matrix using a Hybrid Sintering
- Piezoelectric Properties of BaTiO3 Ceramics with High Performance Fabricated by Microwave Sintering
- Fabrication of High-Performance Lead Zirconate Titanate Actuators Using the Microwave and Hot-Press Hybrid Sintering Processes
- Considerations for BaTiO3 Ceramics with High Piezoelectric Properties Fabricated by Microwave Sintering Method
- Property of Composite Ceramics Composed of Single Crystals and Ceramic Matrix Using Hybrid Sintering
- Domain Properties of High-Performance Barium Titanate Ceramics