Simulation Analysis and Experimental Verification of UV-LIGA Process for High-Aspect-Ratio Ni–Fe Micro-Mold Insert
スポンサーリンク
概要
- 論文の詳細を見る
UV (ultra violet)-LIGA (a German acronym for lithographie, gavanoformung, abformung), a low-cost microcomponent manufacturing technology for micro-electromechanical systems (MEMS), combines the UV patterning of thick photoresist layers with the molding of the resulting patterns by electroforming. It enables mass production of microcomponents using microinjection molding or hot embossing technology. This paper addresses the characteristics of the flow field and the mass transfer effect during micro-electroforming processes. A micro-electroforming experiment is conducted and a simulation is performed to determine optimal conditions for fine surface forming by micro-electroforming. Results show that a smaller diameter of a hole corresponds to poorer plating bath transfer. Plating bath can be replenished by increasing the rotation speed of the electrodes. However, mass transfer is still limited in holes with a high aspect ratio. The theoretical results of simulation analysis were verified by conducting practical electroforming experiments.
- 2003-10-15
著者
-
Tu George-chia
Department Of Material Science And Engineering National Chiao Tung University
-
Fu Ming-nan
Department Of Industrial Engineering And Management Chin Min College
-
Yeh Yih-Min
Department of Material Science and Engineering, National Chiao Tung University, Taiwan 300, ROC
-
Tu George-Chia
Department of Material Science and Engineering, National Chiao Tung University, Taiwan 300, ROC
関連論文
- Flow Simulation for Chemical Mechanical Planarization
- Simulation Analysis and Experimental Verification of UV-LIGA Process for High-Aspect-Ratio Ni–Fe Micro-Mold Insert
- Simulation Analysis and Experimental Verification of LIGA-Like Process for Ni–Fe Micromold Insert with Taper Angle
- Slurry Transport during Chemical Mechanical Polishing
- Simulation for Velocity Measurement with Thermal Micro-flow Sensors
- Variable Optimization for Chemical Mechanical Polishing