Analysis of Volatile Compositions of Magnolia biondii Pamp by Steam Distillation and Headspace Solid Phase Micro-extraction
スポンサーリンク
概要
- 論文の詳細を見る
The chemical compositions of volatile components from Magnolia biondii Pamp were determined by steam distillation (SD) and headspace solid phase micro-extraction (HS-SPME) followed by gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS) analysis. Fifty-six compounds were identified and the major volatile components were d-camphor (0.18-43.26%), 1,8-cineol (13.23-38.02%), α-terpineol (6.57-12.29%) and α-cadinene (5.53-15.15%). The comparison of the volatile components from M. biondii Pamp harvested in three regions of China was investigated. Also, the comparison of volatile components by SD and HS-SPME methods in term of isolation time, plant-consuming and chemical compositions was discussed as well. The percentages of the volatile components by HS-SPME method were found to be large difference from the corresponding one by SD method. HS-SPME technique was much faster than SD (60 min (HS-SPME)/420 min (SD)). Although the aromatic profiles between HS-SPME and SD methods showed several quantitative differences, HS-SPME may be applied routinely to analyze aromatic and medicinal plants.
著者
-
Zhang Tao
Institute For Materials Research Tohoku University
-
Zhang Han
Faculty Of Bioresource Sciences Akita Prefectural University
-
Chen Jie
Faculty Of Bioresource Science Akita Prefectural University
-
Zeng Zhi
School of Chemistry and Environment, South China Normal University
-
Xie Runqian
School of Chemistry and Environment, South China Normal University
-
Zhang Tao
Institute of Opto-electronic Materials and Technology, South China Normal University
関連論文
- 30aPS-13 Zr-Al-Cu-Niバルク金属ガラスの価電子帯電子構造(領域5ポスターセッション)(領域5)
- 14aXE-7 Zr-Cu-Al-Ni 金属ガラスの電気抵抗特性に与える熱処理効果(溶融塩, 金属結合, 合金, 領域 6)
- 27aWK-2 金属ガラスZr-Al-Cu-Ni系の過冷却状態における結晶核生成と結晶成長(結晶・アモルファス・液体金属)(領域6)
- Fabrication of Bulk Glassy Hf_Cu_Ni_Al_ Alloy by Copper Mold Casting
- Bulk Glass Formation of Ti-Zr-Hf-Cu-M (M=Fe, Co, Ni) Alloys
- Molecular Dynamics Simulation on Anelasticity under Tensile and Shearing Stresses in Single Component Amorphous Metal
- Anelastic Behavior under Tensile and Shearing Stresses in Bulk Metallic Glasses
- Effects of Overload and Frequency on Fatigue Crack Propagation in Nanocrystalline Zr-Based Bulk Metallic Glass
- "Fatigue Crack Propagation in a Nanocrystalline Zr-Based Bulk Metallic Glass"
- "FRACTOGRAPHY OF FATIGUE CRACK PROPAGATION IN A NANOCRYSTALLINE Zr-BASED BULK METALLIC GLASS"
- Fatigue Crack Propagation in a Nanocrystalline Zr-Based Bulk Metallic Glass
- Fracture Toughness of Zr_Al_Ni_5Cu_ Bulk Metallic Glass by 3-Point Bend Testing
- Glassy Ni-Ta-Ti-Zr(-Co) Alloys with High Thermal Stability and High Corrosion Resistance
- Formation, Thermal Stability, Mechanical Properties and Corrosion Resistance of Cu-Zr-Ti-Ni-Nb Bulk Glassy Alloys
- Effects of Additional Elements on the Glass Formation and Corrosion Behavior of Bulk Glassy Cu-Hf-Ti Alloys
- Corrosion Behavior of Cu-Zr-Ti-Nb Bulk Glassy Alloys
- Effects of Chromium on the Glass Formation and Corrosion Behavior of Bulk Glassy Fe-Cr-Mo-C-B Alloys
- Formation of Bulk Glassy Ni-(Co-)Nb-Ti-Zr Alloys with High Corrosion Resistance
- New Fe-Cr-Mo-(Nb, Ta)-C-B Glassy Alloys with High Glass-Forming Ability and Good Corrosion Resistance
- New Fe-Co-Ni-Zr-B Amorphous Alloys with Wide Supercooled Liquid Regions and Good Soft Magnetic Properties
- Hard Magnetic Properties of Bulk Amorphous Alloys(Nano-materials)
- Thermal Stability and Magnetic Properties of Bulk Amorphous Fe-Al-Ga-P-C-B-Si Alloys
- Preparation of Bulk Pr-Fe-Al Amorphous Alloys and Characterization of Their Hard Magnetic Properties
- Hard Magnetic Bulk Amorphous Nd-Fe-Al Alloys of 12 mm in Diameter Made by Suction Casting
- Bulk Nd-Fe-Al Amorphous Alloys with Hard Magnetic Properties
- Production of Amorphous Alloy Balloons by Utilizing Viscous Flowability
- Near Infrared Spectroscopy for Determination of the Protein Composition of Rice Flour
- NIR Measurement of Specific Gravity of Potato
- Enhancement of Strength and Ductility in Zr-Based Bulk Amorphous Alloys by Precipitation of Quasicrystalline Phase
- Mechanical Properties of Bulk Amorphous Zr-Al-Cu-Ni-Ag Alloys Containing Nanoscale Quasicrystalline Particles
- High Strength and Good Ductility of Bulk Quasicrystalline Base Alloys in Zr_Al_Ni_Cu_Pd_X System
- Precipitation of Icosahedral Phase in Zr-Ni-Nb-Cu-Al Metallic Glasses
- Ductile Fe-Based BMGs with High Glass Forming Ability and High Strength
- Ductile Fe-Based Bulk Metallic Glass with Good Soft-Magnetic Properties
- Formation and Thermal Stability of Cu_Zr_Al_Er_2 Bulk Metallic Glass with a Diameter of 12mm
- Formation and Mechanical Properties of Bulk Glassy (Cu_Zr_Al_)_RE_1 (RE = Y, Pr, Tb, Dy, Ho, Er) Alloys
- Ce-Rich Misch Metal-Based Bulk Metallic Glasses with High Glass-Forming Ability
- Corrosion Behavior of Zr-(Nb-)Al-Ni-Cu Glassy Alloys
- New Ti-Based Bulk Metallic Glasses with Significant Plasticity
- A New Soft Magnetic Bulk Metallic Glass with Dual Glass Phases
- Formation, Thermal Stability and Mechanical Properties of (Cu_Zr_Ti_)_M_x (M=Fe, Co, Ni) Bulk Glassy Alloys
- Microstructure Feature of Bulk Glassy Cu_Zr_Ti_ Alloy in As-cast and Annealed States
- Thermal Stability and Mechanical Strength of Bulk Glassy Ni-Nb-Ti-Zr Alloys
- Knowledge Management in the Gourmet Advisor
- COORDINATIVE CONTROL OF MULTI-ROBOT SYSTEM BY MEANS OF SOFTWARE PLATFORM OF AGENTS AND KNOWLEDGE MANAGEMENT
- D-8-8 IMPLEMENTATION OF SYMBIOTIC HUMAN-ROBOT SYSTEM THROUGH SPAK
- Formation and High Mechanical Strength of Bulk Glassy Alloys in Zr-Al-Co-Cu System
- Formation, Thermal Stability and Mechanical Properties in Zr-Al-Co Bulk Glassy Alloys
- Studies on the Ohmic Thawing of Frozen Surimi
- Cu-Based Bulk Glassy Alloys with Good Mechanical Properties in Cu-Zr-Hf-Ti System
- High-Strength Cu-Based Bulk Glassy Alloys in Cu-Zr-Ti-Be System
- Thermal and Mechanical Properties of Cu-Based Cu-Zr-Ti Bulk Glassy Alloys
- ECG Data Compression by Using Wavelet Transform (Special Section on ECG Data Compression)
- Synthesis and Mechanical Properties of New Cu-Based Cu-Zr-Al Glassy Alloys with Critical Diameters up to Centimeter Order
- Effect of Carbon Nanotube Addition on the Compressive Fracture Characteristics of Zr-based Bulk Metallic Glass Composites
- Inorganic Composition and Thermal Properties of Cocoon Fiber
- Visible and Near Infrared Spectroscopy for Rapid Analysis of the Sugar Composition of Raw Ume Juice
- Hot-Air Drying Model for Udon Noodles
- Thermal Stability and Mechanical Properties of Bulk Glassy Cu-Zr-Ti-(Nb, Ta) Alloys
- Thermal and Mechanical Properties of Cu-Based Cu-Zr-Ti-Y Bulk Glassy Alloys
- Preparation of New Ni-based Amorphous Alloys with a Large Supercooled Liquid Region
- Thermal and Magnetic Properties of Fe_Co_7Ni_7Zr_Nb_xB_ Amorphous Alloys with Wide Supercooled Liquid Range
- Density, Thermal Stability and Mechanical Properties of Zr-Ti-Al-Cu-Ni Bulk Amorphous Alloys with High Al Plus Ti Concentrations
- Analysis of Volatile Compositions of Magnolia biondii Pamp by Steam Distillation and Headspace Solid Phase Micro-extraction
- Amylose Analysis of Rice Flour Using Near-Infrared Spectroscopy with Particle Size Compensation
- Fabrication of Bulk Glassy Zr_Al_Ni_5Cu_ Alloy of 30 mm in Diameter by a Suction Casting Method
- New Bulk Glassy Ni-Based Alloys with High Strength of 3000MPa
- Bulk Glassy Alloys with Low Liquidus Temperature in Pt-Cu-P System
- New Glassy Zr-Al-Fe and Zr-Al-Co Alloys with a Large Supercooled Liquid Region
- Thermal Stability, Glass-Forming Ability and Mechanical Properties of Mg-Y-Zn-Cu Glassy Alloys
- Synthesis of High Strength Bulk Amorphous Zr-Al-Ni-Cu-Ag Alloys with a Nanoscale Secondary Phase
- Thermal and Mechanical Properties of Ti-Ni-Cu-Sn Amorphous Alloys with a Wide Supercooled Liquid Region before Crystallization
- Formation and Mechanical Strength of Bulk Glassy Alloys in Zr-Al-Co-Cu System
- Mechanical Properties of Zr-Ti-Al-Ni-Cu Bulk Amorphous Sheets Prepared by Squeeze Casting
- A New Method for Producing Amorphous Alloy Wires