ON A HIGH VISCOSITY POLYMER FINISHER APPARATUS WITH TWO AGITATOR AXES HAVING MULTIDISKS
スポンサーリンク
概要
- 論文の詳細を見る
The characteristics of a mixing apparatus with two agitator axes having multidisks as a high viscosity polymer finisher was studied from a practical point of view, 1) Holdup : it could be correlated by using a term of (μnD/δ). 2) Power consumption and mixing time : the results were compared with those of other high-viscosity equipment. 3) Residence time distribution and dead space : the former almost agreed with the tanks-inseries model. The latter seemed to be small. 4) Surface renewal action : the rate of surface renewal was determined from the gas absorption and also estimated by the observation of liquid flow. As a model reaction polycondensation polymerization of polyamide in the presence of water and viscosity stabilizer is discussed.
- 公益社団法人 化学工学会の論文
著者
-
Murakami Yasuhiro
Department of Biology, Graduate School of Natural Science and Technology, Okayama University
-
FUJIMOTO KATSUMASA
Department of Chemical Engineering, Kyushu University
-
KAKIMOTO SHIGERU
Department of Chemical Engineering, Kyushu University
-
SEKINO MASAAKI
Department of Chemical Engineering, Kyushu University
関連論文
- Particle Behavior in a Horizontal Gas-Solid Agitated Vessel with Two Parallel Axes
- Flow and Mixing Characteristics in an Agitated Thin-Film Evaporator with Vertically Aligned Blades
- Interspecific Pair Formation Induced by Natural Mating Reaction in Paramecium
- Flow pattern, circulation velocity and pressure loss in loop reactor.
- Flow pattern in a dual mode agitator with simultaneous up-and-down and rotational motion of impeller.
- Flow structure and mixing mechanism in an agitated thin-film evaporator.
- The effects of multiple inclined blades on flow and mixing characteristics in an agitated thin-film evaporator.
- Relation between intensity of segregation and degree of segregation in stirred tank reactor.
- EVALUATION OF PERFORMANCE OF MIXING APPARATUS FOR HIGH VISCOSITY FLUIDS
- Improvement in mixing of high viscosity liquid by additional up-and-down motion of a rotating impeller.
- Removal of emulsified oil particles by dissolved air flotation.
- Modeling of mixing of solid particles in a horizontal gas-solid agitated vessel with paddle-blades on double parallel axes.
- Evaluation on intensity of segregation of two-environment model for micromixing.
- Power consumptio of a fluid-loaded floating scraper blade.
- Removal of emulsified oil particles by dispersed air flotation.
- THE HOMOGENIZING PROCESS IN HIGH VISCOSITY MATERIALS HAVING DIFFERENT VISCOSITIES
- Two-dimensional viscous flow model for power consumption in close-clearance agitators.
- Mixing effect on irreversible second order reaction in batch stirred tank reactor.
- ON A HIGH VISCOSITY POLYMER FINISHER APPARATUS WITH TWO AGITATOR AXES HAVING MULTIDISKS
- Mixing effect on homogeneous reaction in batch stirred tank reactor.
- Mixing effect on competitive consecutive reaction in batch stirred tank reactor.