Flow structure and mixing mechanism in an agitated thin-film evaporator.
スポンサーリンク
概要
- 論文の詳細を見る
The flow structure and mixing mechanism of the high-viscosity fluid in an agitated thin-film evaporator were experimentally and numerically investigated. Film thickness, holdup and power consumption were measured, and velocity distributions were numerically calculated using a finite element method. The results show that most of the fluid flows down in a fillet and that mixing between fillet and film is extremely suppressed. This also suggests that usual thin-film evaporators are not always effective.
- 公益社団法人 化学工学会の論文
著者
-
Komori Satoru
Department of Chemical Engineering Kyushu University
-
Takata Kazutaka
Department of Chemical Engineering, Kyushu Univ.
-
Murakami Yasuhiro
Department of Biology, Graduate School of Natural Science and Technology, Okayama University
-
Takata Kazutaka
Department of Chemical Engineering, Kyushu University
関連論文
- Particle Behavior in a Horizontal Gas-Solid Agitated Vessel with Two Parallel Axes
- Flow and Mixing Characteristics in an Agitated Thin-Film Evaporator with Vertically Aligned Blades
- CONCCENTRATION CORRELATION IN A TURBULENT MIXING LAYER WITH CHEMICAL REACTIONS
- Mass Transfer Across Gas-Liquid Interface in a Capillary Tube
- On the Refinement of a Second-order Closure Model for Thermal Turbulence
- Discrimination of Spurious Self-Correlation in Nondimensionalized Analyses of Fluid Dynamical Data
- B201 LARGE-EDDY SIMULATION OF COAL COMBUSTION ON A PULVERIZED COAL COMBUSTION TEST FURNACE WITH A PRACTICAL SWIRL BURNER(Combustion-4)
- Interspecific Pair Formation Induced by Natural Mating Reaction in Paramecium
- Examination of Drag Coefficient with Special Reference to the Windsea Reynolds Number : Conditions with Counter and Mixed Swell
- Effects of Internal Pressure and Inlet Velocity Disturbances of Air and Fuel Droplets on Spray Combustion Field
- Flow pattern, circulation velocity and pressure loss in loop reactor.
- Flow pattern in a dual mode agitator with simultaneous up-and-down and rotational motion of impeller.
- Flow structure and mixing mechanism in an agitated thin-film evaporator.
- The effects of multiple inclined blades on flow and mixing characteristics in an agitated thin-film evaporator.
- Relation between intensity of segregation and degree of segregation in stirred tank reactor.
- EVALUATION OF PERFORMANCE OF MIXING APPARATUS FOR HIGH VISCOSITY FLUIDS
- Improvement in mixing of high viscosity liquid by additional up-and-down motion of a rotating impeller.
- Removal of emulsified oil particles by dissolved air flotation.
- Modeling of mixing of solid particles in a horizontal gas-solid agitated vessel with paddle-blades on double parallel axes.
- Evaluation on intensity of segregation of two-environment model for micromixing.
- Power consumptio of a fluid-loaded floating scraper blade.
- Removal of emulsified oil particles by dispersed air flotation.
- THE HOMOGENIZING PROCESS IN HIGH VISCOSITY MATERIALS HAVING DIFFERENT VISCOSITIES
- Two-dimensional viscous flow model for power consumption in close-clearance agitators.
- Mixing effect on irreversible second order reaction in batch stirred tank reactor.
- ON A HIGH VISCOSITY POLYMER FINISHER APPARATUS WITH TWO AGITATOR AXES HAVING MULTIDISKS
- A Two-Fluid Turbulence Model for Gas-Solid Two-Phase Flows.
- Mixing effect on homogeneous reaction in batch stirred tank reactor.
- Mixing effect on competitive consecutive reaction in batch stirred tank reactor.