Modeling of mixing of solid particles in a horizontal gas-solid agitated vessel with paddle-blades on double parallel axes.
スポンサーリンク
概要
- 論文の詳細を見る
A stochastic model to explain the mixing of solid particles in a horizontal agitated vessel with paddle-blades on double parallel axes was proposed. It was first found that the particles are mainly mixed not in the particle beds, but in the spacious part above the beds. On the basis of the experimental findings, the axial mixing process was modeled by using the transient probability of the particles, which was derived from the measured probability of the axial velocity. Predictions by the stochastic model were in good agreement with measurements of particle concentration in the dispersion experiments of Tenda <I>et al.</I><SUP>10)</SUP>
- The Society of Chemical Engineers, Japanの論文
著者
-
Tenda Tsugio
Department of Chemical Engineering Kyushu University
-
Komori Satoru
Department of Chemical Engineering Kyushu University
-
Murakami Yasuhiro
Department of Biology, Graduate School of Natural Science and Technology, Okayama University
関連論文
- Particle Behavior in a Horizontal Gas-Solid Agitated Vessel with Two Parallel Axes
- Flow and Mixing Characteristics in an Agitated Thin-Film Evaporator with Vertically Aligned Blades
- CONCCENTRATION CORRELATION IN A TURBULENT MIXING LAYER WITH CHEMICAL REACTIONS
- Mass Transfer Across Gas-Liquid Interface in a Capillary Tube
- On the Refinement of a Second-order Closure Model for Thermal Turbulence
- Discrimination of Spurious Self-Correlation in Nondimensionalized Analyses of Fluid Dynamical Data
- B201 LARGE-EDDY SIMULATION OF COAL COMBUSTION ON A PULVERIZED COAL COMBUSTION TEST FURNACE WITH A PRACTICAL SWIRL BURNER(Combustion-4)
- Interspecific Pair Formation Induced by Natural Mating Reaction in Paramecium
- Examination of Drag Coefficient with Special Reference to the Windsea Reynolds Number : Conditions with Counter and Mixed Swell
- Effects of Internal Pressure and Inlet Velocity Disturbances of Air and Fuel Droplets on Spray Combustion Field
- Flow pattern, circulation velocity and pressure loss in loop reactor.
- Flow pattern in a dual mode agitator with simultaneous up-and-down and rotational motion of impeller.
- Flow structure and mixing mechanism in an agitated thin-film evaporator.
- The effects of multiple inclined blades on flow and mixing characteristics in an agitated thin-film evaporator.
- Relation between intensity of segregation and degree of segregation in stirred tank reactor.
- EVALUATION OF PERFORMANCE OF MIXING APPARATUS FOR HIGH VISCOSITY FLUIDS
- Improvement in mixing of high viscosity liquid by additional up-and-down motion of a rotating impeller.
- Removal of emulsified oil particles by dissolved air flotation.
- Modeling of mixing of solid particles in a horizontal gas-solid agitated vessel with paddle-blades on double parallel axes.
- Evaluation on intensity of segregation of two-environment model for micromixing.
- Power consumptio of a fluid-loaded floating scraper blade.
- Removal of emulsified oil particles by dispersed air flotation.
- THE HOMOGENIZING PROCESS IN HIGH VISCOSITY MATERIALS HAVING DIFFERENT VISCOSITIES
- Two-dimensional viscous flow model for power consumption in close-clearance agitators.
- Mixing effect on irreversible second order reaction in batch stirred tank reactor.
- ON A HIGH VISCOSITY POLYMER FINISHER APPARATUS WITH TWO AGITATOR AXES HAVING MULTIDISKS
- A Two-Fluid Turbulence Model for Gas-Solid Two-Phase Flows.
- Mixing effect on homogeneous reaction in batch stirred tank reactor.
- Mixing effect on competitive consecutive reaction in batch stirred tank reactor.