Low temperature sintering of β-spodumene ceramics with low thermal expansion using Li2O–Bi2O3 as a sintering additive
スポンサーリンク
概要
- 論文の詳細を見る
Low temperature sintering of β-spodumene ceramics with low coefficient of thermal expansion (CTE) was attained using Li2O–Bi2O3 sintering additive. High purity β-spodumene could be synthesized at 1150°C using high purity and fine amorphous silica, γ-alumina and lithium carbonate powder mixture via the solid state reaction route. The mixture was calcined at 800°C, pulverized, compacted, and sintered with or without the sintering additive at 800–1350°C for 2 h. The relative density reached 95% for the sample sintered with 3 mass % of Li2O–Bi2O3 additive at 1050°C for 2 h. As a result, sintering temperature could be lowered about 200°C by adding the sintering additive, compared with the sintering temperature previously reported. The flexural strength of the sample sintered with 3% of Li2O–Bi2O3 additive at 1050°C for 2 h was 118 MPa. Its CTE (from R.T. to 800°C) was 0.2 × 10−6/K. Its dielectric constant was 8.2 with loss tangent of 1.4%.
- 公益社団法人 日本セラミックス協会の論文
著者
-
Shoji Kazuo
Department Of Electrical Engineering Ashikaga Institute Of Technology
-
Shoji Kazuo
Department Of Electrical Engineering Ashikaga Institure Of Technology
-
OGIWARA Toshio
Department of General Education, Ashikaga Institute of Technology
-
NODA Yoshimasa
Collaborative Research Center, Ashikaga Institute of Technology
-
KIMURA Osamu
Collaborative Research Center, Ashikaga Institute of Technology
-
SHOJI Kazuo
Department of Electrical and Electronic Engineering, Ashikaga Institute of Technology
-
Shoji Kazuo
Department of Electric and Electronic Engineering, Ashikaga Institute of Technology, 268-1 Omae, Ashikaga, Tochigi 326-8558, Japan
-
Ogiwara Toshio
Department of Chemistry, Faculty of Technology, Gunma University
関連論文
- Solid state synthesis and its characterization of high density cordierite ceramics using fine oxide powders
- Pyruvic Oxime Dioxygenase from the Heterotrophic Nitrifier Alcaligenes faecalis : Purification, and Molecular and Enzymatic Properties
- Fabrication of high density cordierite ceramics using a coal fly ash
- Low temperature sintering of β-spodumene ceramics with low thermal expansion using Li2O–Bi2O3 as a sintering additive
- The Regulation by ATP of the Structure and Activity of Thiobacillus novellus Cytochrome c Oxidase
- Low-Temperature Sintering of Pb(Ni1/3Nb2/3)O3–PbZrO3–PbTiO3 Ceramics via Single-Step Calcination Process without Sintering Additives
- Dielectric Breakdown Strength of Grain-Oriented Bi_4Ti_3O_ Ceramics
- Grain Orientation of SbSI Ceramics : Ferroelectrics
- Preparation and Properties of Rapid Quenched (BaO)_・(TiO_2)_x Amorphous Ribbons : N: Noncrystal Materials
- High-Curie-Temperature Pb(Zr,Ti)O3 Ceramic Actuator Cofired with Pure Silver Internal Electrodes
- Low temperature sintering of .ALPHA.-cordierite ceramics with low thermal expansion using Li2O-Bi2O3 as a sintering additive
- Grain-Orientation of Bi_4Ti_3O_ Ceramics by Cold-Uniaxial Method : F: FERROELECTRIC MATERIALS
- Electrical Properties of Rapid Quenched Bi_4Ti_3O_ Amorphous Ribbons : T: Thin Film
- Preparation and Properties of Ceramics Prepared from Bi_4Ti_3O_ Amorphous Material ( FERROELECTRIC MATERIALS AND THEIR APPLICATIONS)
- Weak Fluorescence from [2.2]Metacyclophane