Youngs Modulus of Thermal Barrier Coating and Oxidation Resistant Coating Bonded to Stainless Substrate by Four-Point Bending
スポンサーリンク
概要
- 論文の詳細を見る
Youngs modulus of thermal barrier coating (TBC) is one of the most essential mechanical properties on the designing of high performance TBC system. This paper describes one of the round-robin test results of New Energy and Industrial Technology Development Organizations (NEDOs) project titled “the survey-research of standardization on testing methods for thermo-mechanical performance of ceramic thermal barrier coatings”, for the fiscal years of 2006 and 2007. The bending method of the coating bonded to substrate is straightforward in preparing the specimen and loading to the specimen. Previous study has offered recommended testing methods and proper geometries of the specimens for the Youngs modulus of thermal barrier coating and the bond coating. This paper confirmed that the recommended method and the geometry of the specimen provided the reasonable estimation as far as the other type of substrate material. It was also confirmed that the ratio of coating thickness to substrate thickness should be high and the threshold ratio was independent of the substrate material.
著者
-
OKAZAKI Masakazu
Department of Mechanical Engineering, Nagaoka University of Technology
-
WAKI Hiroyuki
Department of Mechanical Engineering, Osaka Electro-Communication University
-
FUJIOKA Hidenori
Graduate School of Osaka Electro-Communication University
-
HARADA Yoshio
Thermal Spraying Technology R&D Laboratory, TOCALO Co., Ltd
-
KAWASAKI Akira
Department of Materials Processing, Tohoku University
-
Okazaki Masakazu
Department Of Mechanical Engineering Nagaoka University Of Technology
-
Kawasaki Akira
Department Of Hematology/oncology Osaka University Graduate School Of Medicine
-
Harada Yoshio
Thermal Spraying Technology R & D Laboratory, Tocalo Co., Ltd.
-
Harada Yoshio
Thermal Spraying Technology R & D Laboratories, Tocalo Co., Ltd.
-
HARADA Yoshio
Thermal Spraying Technology R&D Laboratory, TOCALO Co., Ltd
関連論文
- Thermo-Mechanieal and Low Cycle Fatigues of Single Crystal Ni-Base Superalloys; Importance of Microstructure for Life Prediction(Macro-, Micro-, Meso-, and Nano-scopic Strength of Materials Relating to Microstructures)
- Effect of Coating Process Condition on High-Temperature Oxidation and Mechanical Failure Behavior for Plasma Sprayed Thermal Barrier Coating Systems
- Youngs Modulus of Thermal Barrier Coating and Oxidation Resistant Coating Bonded to Stainless Substrate by Four-Point Bending
- Collaborative Research on Adhesion Strength of Thermal Barrier Coatings in JSMS
- A New Testing Method to Evaluate Adhesion Strength of Ceramic Top Coat in TBCs
- Heat Insulation Performance of Functionally Graded Metal/Ceramic Coatings and Fracture Behavior under High Heat Flux (特集 傾斜機能材料)
- Development of Lateral Compression Method of Circular Tube Thin Coating for Mechanical Properties of Plasma Sprayed CoNiCrAlY
- Residual Stress Measurement of Plasma-Sprayed Coatings
- The Potential for the Improvement of High Performance Thermal Barrier Coatings
- Nano-Characterization of Ceramic Top-Coat/Metallic Bond-Coat Interface for Thermal Barrier Coating Systems by Plasma Spraying
- Microstructure and High-Temperature Property of Reaction HIP-Sintered SiC-AlN Ceramic Alloys
- Effects of Content and Size of Al2O3 Particle Dispersion on the Sintering Densification Rate of Y-PSZ/Al2O3 Composites (特集 多元系混合粉の焼結過程および焼結機構)
- Evaluation of High-Temperature Strength of Mo/PSZ Composites by Modified Small Punch Tests
- Stress Histories of Yttria-Stabilized Zirconia and CoNiCrAlY Coatings during Thermal Spraying
- Effect of Microstructure on Thermal Shock Cracking of Functionally Graded Thermal Barrier Coatings Studied by Burner Heating Test
- Microstructural Modeling and Thermal Property Simulation of Unidirectional Composite
- Effective Thermal Conductivity of Anisotropic Cu-Mo Composites
- Constitutively Activated Rho Gunosine Triphosphatases Regulate the Growth and Morphology of Hairy Cell Leukemia Cells
- Physicochemical Properties of Single Phase La_2Zr_2O_7 Powder
- Synthesis of Single Phase La_2Zr_2O_7 by Wet Mechanochemical Treatment
- Characterization of TiN-AlN Composites Prepared Through Mechanical Alloying and Followed by Pressure Sintering
- High Temperature Mechanical Properties of Free-Standing HVOF CoNiCrAlY Coatings by Lateral Compression of Circular Tube
- Preparation of Monosized Copper Micro Particles by Pulsated Orifice Ejection Method
- Preparation of Monosized Silicon Micro Particles by Pulsated Orifice Ejection Method (特集 粉末製造技術とその評価)
- MICROSCOPIC ASPECT AND MECHANICS OF CREEP-FATIGUE FAILURE IN SiC WHISKER REINFORCED ALUMINUM BASE COMPOSITE AT HIGH TEMPERATURE
- Notch Root Biaxial Cyclic Strain Behavior of Type 304 Stainless Steel at Elevated Temperature Using Laser Speckle Strain/Displacement Gauge
- Fabrication and Thermal Properties of Carbon Nanotube/Nickel Composite by Spark Plasma Sintering Method
- Mechanism of Vertical Microcracking in CaO・SiO_2-CaO・ZrO_2 Sprayed Thermal Barrier Top Coating
- Multi-Walled Carbon Nanotube-Aluminum Matrix Composites Prepared by Combination of Hetero-Agglomeration Method, Spark Plasma Sintering and Hot Extrusion
- Microstructure and Mechanical Properties of TiB_2-W Cermets Prepared by HIP
- Low Cycle and Thermo-Mechanical Fatigue of Friction Welded Dissimilar Superalloys Joint
- Effects of Polarization on Mechanical Properties of Lead Zirconate Titanate Ceramics Evaluated by Modified Small Punch Tests
- Effect of Bond Coat Materials on Thermal Fatigue Failure of EB-PVD Thermal Barrier Coatings
- Effect of Polydispersity on Photonic Band Gap of Terahertz Photonic Crystals Fabricated by Particle Assembly
- Durability of Sprayed WC/Co Coatings in Al-added Zinc Bath.
- Durability of WC/Co Sprayed Coatings in Molten Pure Zinc.
- Nonlinearity of Uniaxial Compressive Response in Atmospheric Plasma Sprayed Free-Standing CoNiCrAlY Coatings