Thermo-Mechanieal and Low Cycle Fatigues of Single Crystal Ni-Base Superalloys; Importance of Microstructure for Life Prediction(<Special Issue>Macro-, Micro-, Meso-, and Nano-scopic Strength of Materials Relating to Microstructures)

スポンサーリンク

概要

• 論文の詳細を見る

• Behavior of thermo-mechanical fatigue (TMF) of a single crystal Ni-base superalloy, CMSX-4, was studied, compared with that of isothermal low-cycle fatigue (LCF). Straincontrolled TMF and LCF tests of CMSX-4 were carried out under various test conditions, where the experimental variables were strain rates, strain ratio, temperature range, and strain/temperature phase angle. At first it was shown experimentally that the TMF and LCF failures took places, associated with some noteworthy characteristics which were rarely seen in the traditional polycrystalline heat resistant alloys. They could not be explained reasonably, based on the historical approaches. A new micromechanics model was proposed to predict the TMF and LCF lives, applying the Eshelby's theory and the Mori-Tanaka's averaging approximation. The model presented in this paper enabled us to successfully estimate not only the unique characteristics in the TMF and LCF failures but also the effect of γ' geometry on the LCF lives.

• 2006-07-15

著者

• SAKAGUCHI Motoki

  Department of Material Engineering, Nagaoka University of Technology

• OKAZAKI Masakazu

  Department of Mechanical Engineering, Nagaoka University of Technology

• Okazaki Masakazu

  Department Of Mechanical Engineering Nagaoka University Of Technology

• Sakaguchi Motoki

  Department Of Material Engineering Nagaoka University Of Technology

関連論文

• Thermo-Mechanieal and Low Cycle Fatigues of Single Crystal Ni-Base Superalloys; Importance of Microstructure for Life Prediction(Macro-, Micro-, Meso-, and Nano-scopic Strength of Materials Relating to Microstructures)
• Youngs Modulus of Thermal Barrier Coating and Oxidation Resistant Coating Bonded to Stainless Substrate by Four-Point Bending
• Collaborative Research on Adhesion Strength of Thermal Barrier Coatings in JSMS
• A New Testing Method to Evaluate Adhesion Strength of Ceramic Top Coat in TBCs
• The Potential for the Improvement of High Performance Thermal Barrier Coatings
• MICROSCOPIC ASPECT AND MECHANICS OF CREEP-FATIGUE FAILURE IN SiC WHISKER REINFORCED ALUMINUM BASE COMPOSITE AT HIGH TEMPERATURE
• Low Cycle and Thermo-Mechanical Fatigue of Friction Welded Dissimilar Superalloys Joint
• Effect of Bond Coat Materials on Thermal Fatigue Failure of EB-PVD Thermal Barrier Coatings

スポンサーリンク