Numerical Simulation of Local Heat Transfer Coefficients in Stirred Vessel with Impeller for Highly Viscous Fluids
スポンサーリンク
概要
- 論文の詳細を見る
We present a method of estimating local heat transfer coefficients on the wall of a stirred vessel for highly viscous liquids fitted with various types of impellers using only numerical simulation.We analyze simultaneously specific flow and heat transfer behaviors in an unsteady state due to heating from the side wall of the vessel by finely dividing the analyzed region within a temperature boundary layer in the vicinity of the wall.The fluids used for analysis are a highly viscous Newtonian and a non-Newtonian pseudoplastic liquid. The impellers used are a six-blade paddle, a double-helical ribbon and an anchor type.We clarify the dynamic changes of the Nusselt number distribution along the vessel height direction from the beginning of heating to the pseudo-steady state, as follows: The distributions are rather flat and at high values just after the beginning of the heating. Subsequently, the values decrease as the temperature boundary layer develops. Further, the maxima of the values grow at the points of the vessel wall where the discharge flows from the impellers impinge.We also clarify that there is no striking difference in flow and heat transfer behaviors, except for the apparent viscosity distribution around the impellers, for each impeller vessel regardless of whether it is pseudoplastic or Newtonian, provided that both, the initial Red and Pr number are set to be identical for the two liquids.We ascertaine the reliability of the simulated estimates by verifying them with experimental results from a multi-point, real-time temperature measuring system which we have developed.
- 社団法人 化学工学会の論文
著者
-
上ノ山 周
横国大院・工
-
Kaminoyama Meguru
Department of Chemical System Engineering, Yokohama National University
-
KAMIWANO Mitsuo
Department of Material Science and Chemical Engineering, Yokohama National University
-
NISHI Kazuhiko
Department of Material Sciences and Chemical Engineering, Yokohama National University
-
WATANABE Muneko
Department of Material Sciences and Chemical Engineering, Yokohama National University
-
Nishi K
Faculty Of Engineering Yokohama National University
-
Watanabe Muneko
Department Of Material Sciences And Chemical Engineering Yokohama National University
-
Kamiwano Mitsuo
Department Of Chemical Engineering Faculty Of Engineering Yokohama National University
-
Kaminoyama Meguru
Department Of Chemical System Engineering Yokohama National University
-
Nishi Kazuhiko
Division Of Materials Science And Chemical Engineering Faculty Of Engineering Yokohama National Univ
-
Nishi Kazuhiko
Department of Material Science and Chemical Engineering, Yokohama National University
関連論文
- 2,3-ジクロロ-1,3-ブタジエン懸濁重合によるポリ塩化ビニルの粒子特性代替評価法の検討
- Mathematical Modeling of Sulfate Fining in a Glass Melting Furnace
- パドル翼付撹拌槽内におけるスラリー流体の流動 - 淀み領域の熱的判定法
- 連続式撹拌型食塩蒸発晶析装置における高懸濁濃度での安定操作に関する検討
- 二重らせん帯翼付撹拌槽におけるスチレン塊状重合反応過程の数値解析
- リアルタイム高速画像処理システムを用いた液々撹拌槽における液滴径分布の測定法
- 双腕式捏和機による湿潤粉体の混合過程の解析
- 湿潤粉体の捏和における混合機構のモデル的検討
- 電気化学的方法を用いた水-空気-固体粒子系湿潤粉体の混合状態の測定法
- 双腕式捏和機における湿潤粉体の混合 (流体技術の課題)
- 捏和装置における湿潤粉体の混合過程の測定法 (新技術を生みだす測定手法)
- Scale-Up Factor for Mean Drop Diameter in Batch Rotor-Stator Mixers
- Measurements of the Phase Inversion Phenomenon in a Suspension Polymerization Reactor with an Electrical Resistance Tomography System
- 横浜国立大学大学院工学研究院機能の創生部門流動プロセス工学研究室
- 電気抵抗方式トモグラフィー計測の異相系撹拌槽への応用
- 化学装置内における数値流動・混合シミュレーション
- 電気抵抗方式トモグラフィー計測の異相系撹拌槽への応用 (特集 情報化技術と混相流(2))
- Suspension Property of Highly Concentrated Solid Particles Settling in a Draft-Tube Stirred Vessel
- Correlation of the Mixing Process and the Power Consumption of Double-Blade Kneaders
- Numerical Analysis of the Mixing Process of a Heterogeneously Viscous System with High Concentration Slurry Liquids in a Stirred Vessel
- 半回分式ドラフトチューブ付撹拌型蒸発晶析槽における食塩結晶の成長速度に及ぼす操作条件の影響
- Power Consumption of Double-Bladed Kneaders of Various Shapes
- 高速画像処理システムを用いた撹拌型晶析槽における結晶粒径分布のオンライン計測法
- 電気抵抗方式トモグラフィー法を用いた異相系撹拌槽における分散状態の可視化
- 撹拌槽を用いた溶液晶析反応の数値流動解析手法および核発生モデルの開発
- 各種双腕式湿潤粉体捏和機における画像解析による微視的混合状態の評価法
- Effects of Instantaneous Slip Velocity and Solute Distribution on the Dissolution Process of Crystal Particles in a Stirred Vessel
- 分散装置の立場からみた微粒子分散の基本的な考え方と最新の話題
- 結晶の成長速度に及ぼす操作条件の影響 (プロジェクト研究(理工学:2年度) 食塩晶析工程の高効率化)
- A Method for Measuring Bubble Diameter Distribution in Gas-Liquid Agitated Vessel under High Gas Hold-Up Using Real-Time High-Speed Image Processing System
- 電気抵抗方式トモグラフィー計測による懸濁重合槽内における反応分散状態の制御
- 基調講演 電気抵抗方式トモグラフィー計測による懸濁重合槽内における反応分散状態の制御 (第31回可視化情報シンポジウム講演論文集) -- (ワークショップ コンピューティッド・トモグラフィー(CT)による可視化計測 2)
- 食塩晶析工程の高効率化--結晶の成長速度に及ぼす操作条件の影響 (プロジェクト研究(理工学:初年度) 食塩晶析工程の高効率化)
- 攪拌層における高品質結晶の製造を目的とした流動・晶析場の数値解析手法の開発
- 晶析槽内における結晶成長過程に及ぼす撹拌操作の影響
- 攪拌型重合反応槽内における数値熱流動解析 (特集 最近のミキシング研究と開発)
- 異相系撹拌槽内における流動・混合・分散状態のCFD計算ならびにERT計測
- Influence of Mixing Conditions on Properties of Powder Composed of a Polymer Prepared by 2,3-Dichloro-1,3-Butadiene Suspension Polymerization
- 数値シミュレーションの問題点
- NUMERICAL ANALYSIS OF POWER CONSUMPTION AND MIXING TIME FOR A PSEUDOPLASTIC LIQUID IN GEOMETRICALLY SIMILAR STIRRED VESSELS WITH SEVERAL KINDS OF PLATE-TYPE IMPELLERS
- Characterization of Non-Newtonian Behavior during Mixing of Bacterial Cellulose in a Bioreactor
- ミキシング技術の高度化に向けて (特集 ミキシング技術の新展開)
- Measurement Method of Liquid Velocity Using an Image Sensor : Application to a Stirring Vessel
- 連続アニュラー型湿式媒体撹拌ミルにおける微粒子の粉砕進行状況の表示と評価法
- 長距離パイプラインにおけるCWMの安定性に関する研究
- リアルタイム高速画像処理システムを用いた気液系撹拌槽における気泡分散状態の測定法
- 重合槽内における反応進行にともなう冷却コイルの境膜熱伝達係数の経時変化
- 多種汎用翼付き重合反応槽内における温度むらと重合物物性の関係
- 攪乱物を有する流通式液相反応管内における乱流混合状態の測定
- 回分式撹拌槽内における重合反応過程の数値解析法 (数値解析と化学装置モデリング)
- 理科教育は学会の入り口
- Method of Evaluating the Liquid-Liquid Dispersion by the Indices Defined Based on Shape of the Drop Size Distribution in Various Impeller Stirred Tanks
- Power Consumption Diagram for Wet Particle Kneader Mixers - In the Case that Rheological Properties for Wet Particles cannot be Measured -
- Numerical Simulation of Local Heat Transfer Coefficients in Stirred Vessel with Impeller for Highly Viscous Fluids
- Development and Evaluation of Large-Scale Impeller Generating Strong Circulation Flow Suitable for Wide Viscosity Range in Reactor with Cooling Coil
- 撹拌槽内における高粘度液の流動・伝熱のシミュレ-ション (特集 化工シミュレ-ションの効用)
- 攪拌槽のスケールアップ
- Measurements of the Phase Inversion Phenomenon in a Suspension Polymerization Reactor with an Electrical Resistance Tomography System
- ドラフトチューブ付撹拌槽を用いた食塩の高懸濁密度蒸発晶析操作の高効率化 (特集 海水資源利用に向けた晶析技術の展開)
- Mediastinal Growing Teratoma Syndrome
- 固液撹拌槽内での粒子衝突現象のラグラジアン解析(混相(1),一般講演)
- Pharmacologic Actions of Temiverine (p-INN) and its Active Metabolite, RCC-36, on Isolated Human Urinary Bladder Muscle
- Evaluation Method of Homogenization Effect for Different Stator Configurations of Internally Circulated Batch Rotor-Stator Mixers
- Study of Diffusion of Co(II) and Co(II)-DEHPA Complex in a Microfluidic Device
- Scale-Up Factor for Mean Drop Diameter in Batch Rotor-Stator Mixers
- リアルタイム多点温度計測器の試作-高粘度撹拌槽における伝熱状態の測定への応用-
- 化学装置内における流動シミュレーション
- Flow and diffusion behaviour as a function of viscosity in a double Y type microfluidic device
- ドラフトチューブ付撹拌槽を用いた食塩の高懸濁密度蒸発晶析操作の高効率化
- 数値流動解析による各種翼付撹拌槽内における固体粒子挙動の検討
- Development and Mixing Characteristics of a Multistage Impeller for Agitating Highly Viscous Fluids
- Scale-Up Factor for Mean Drop Diameter in Batch Rotor-Stator Mixers with Internal Circulation
- 試作した連続アニュラー型湿式媒体攪拌ミルの粉砕性能 (第2報) : 粉砕性能に及ぼす種々の粉砕因子の影響
- 試作した連続アニュラー型湿式媒体攪拌ミルの粉砕性能 (第1報)
- 撹拌槽内における高粘度液の流動状態のシミュレ-ション (シミュレ-ション・テクノロジ-)
- Mathematical Modeling of Sulfate Fining in a Glass Melting Furnace
- Measuring Method According to Lagrangian Description of Liquid Velocity Using an Image Sensor : Application to a Stirred Vessel
- Flow and Diffusion Behavior as a Function of Viscosity in a Double-Y-Type Microfluidic Device
- Highly Efficient Evaporative Crystallization of a High Suspension Density Sodium Chloride Slurry in a Draft-Tube Stirred Vessel in Continuous Operation
- Optimal Seeding Conditions for Semi-Batch Type Evaporative Crystallization of a High Suspension Density Sodium Chloride Slurry in a Draft-Tube Stirred Vessel
- 撹拌型晶析槽内における槽底からの粒子浮遊メカニズム
- A Case of Cortisol Producing Adrenal Adenoma Associated with a Latent Aldosteronoma: Usefulness of the ACTH Loading Test for the Detection of Covert Aldosteronism in Overt Cushing Syndrome
- An extended technique for predicting the mixing times of high-viscosity liquid in a mixer. Mixing systems with molecular diffusion and reaction of solutes.
- Flow analogy of pseudoplastic liquid in geometrically similar stirred vessels based on numerical analysis.