Impact of Formaldehyde Addition on Auto-Ignition in Internal-Combustion Engines(<Special Issue>Advanced Combustion Technology in Internal Combustion Engines)

概要

論文の詳細を見る
By employing a direct-injection diesel engine equipped with a common-rail type of injection system, by adding formaldehyde (CH_2O) to the intake air, and by changing the fuel-injection timing, the compression ratio and the intake-air temperature, a mechanism for CH_2O as a fuel additive to affect auto-ignition was discussed. Unlike an HCCI type of engine, the diesel engine can expose an air-fuel mixture only to a limited range of the in-cylinder temperature before the ignition, and can separate low-and high-temperature parts of the mechanism. When low-temperature oxidation starts at a temperature above 900K, there are cases that the CH_2O advances the ignition timing. Below 900K, to the contrary, it always retards the timing. It is because, above 900K, a part of the CH_2O changes into CO together with H_2O_2 as an ignition promoter. Below 900K, on the other hand, the CH_2O itself acts as an OH radical scavenger against cool-flame reaction, from the beginning of low-temperature oxidation. Then, the engine was modified for its extraordinary function as a gasoline-knocking generator, in order that an effect of CH_2O on knocking could be discussed. The CH_2O retards the onset of auto-ignition of an end gas. Judging from a large degree of the retardation, the ignition is probably triggered below 900K.
一般社団法人日本機械学会の論文
2005-11-15