The Effect of Carbon Addition on the Magnetic Shunt Properties of M.S.O. Alloy
スポンサーリンク
概要
- 論文の詳細を見る
The magnetic shunt properties of a kind of M.S.O. Alloy (31%Ni, 8.5%Cr and rest Fe) containing C from 0.019 to 0.150% were studied. The magnetization curves at 0°to 40℃ were measured by the ballistic method. The dimension of specimen was 0.4 cm in diameter, 3.1 cm in length, and so the demagnetization factor N was 0.30. The experimental results on magnetic shunt properties are summarised as follows : (1) With increasing C addition, the permeability decreases at first and then increases slightly through a feeble minimum. It is assumed that the former decreasing is due to the impurity of C and the latter increasing due to the formation of Fe_6Cr_<17>C_6 which is speculated by the microscopic. texture and the calculation. (2) The temperature coefficient of permeability becomes larger with increasing C addition, and its linearity becomes worse.
- 東北大学の論文
著者
-
Tanji Yasunori
The Research Institute For Iron Steel And Other Metals
-
SHIRAKAWA Yuki
The Research Institute for Iron, Steel and Other Metals
-
OHARA Toru
Faculty of Engineering, Tohokugakuin University
-
Shirakawa Yuki
The Research Institute For Iron Steel And Other Metals
-
Ohara Toru
Faculty Of Engineering Tohokugakuin University
関連論文
- Thermal Expansion Coefficient of Fe-Ni(fcc) Alloys
- Influence of Magnetostrictive Volume Expansion on High Field Susceptibility of Fe-Ni Alloys
- The Effect of Carbon Addition on the Magnetic Shunt Properties of M.S.O. Alloy
- 〓E Effect of Nickel
- Thermal Expansion Coefficient and Spontaneous Volume Magnetostriction of Fe-Ni (fcc) Alloys
- Specific Heats of Fe-Ni (fcc) Alloys at High Temperature
- Evaluation of Precise Measurements of Young's Modulus and Shear Modulus by the Electro-static Driving Method
- Young's Modulus, Shear Modulus and Compressibility of Fe-Ni(fcc) Alloys
- Variation of Internal Friction with Magnetization in Nickel
- The Elastic Constants of Ni and Ni-Fe (fcc) Alloys
- The Orthorhombic Distortion in γ Manganese Alloys Containing Nickel
- Measurement of Young's Modulus of Thin Plate by the Composite Vibrator Method(Physics)
- Measurement of Young's Modulus of Thin Plate by Composite Vibrator Method
- Anomalous Concentration Dependence of Thermoelectric Power of Fe-Ni (fcc) Alloys at High Temperatures
- Debye Temperature and Lattice Deviation of Fe-Ni (fcc) Alloys
- Frequency Dependence of Dynamic ΔE Effect in a Weak Magnetic Field for Ni
- On the Magnetic Shunt Characteristics of Fe-Ni-Cr Alloys and M. S. Alloy
- Thermocouples with Curved Characteristics Composed of Fe-Al-Cr and Cu-Ni Alloys
- The Wiedemann Effect of the Binary System of Iron Aluminium Alloys at High Temperatures
- The Wiedemann Effect of the Magnetostriction Alloy "Alfer" at High Temperatures
- The Wiedemann Effect of the Magnetostriction Alloy "Alfer"
- On the Magnetostriction of Iron-Aluminium Alloys and a New Alloy "Alfer"
- On Young's Modulus of Elasticity of Single Crystals of Nickel and Cobalt
- Magnetic Properties of Magnet Alloys of Iron, Wolfram and Molybdenum
- On Young's Modulus and Grain Size in Nickel-Copper Alloys
- Magnetic Properties of Spheroidal Graphite Cast Iron
- Growth Rates of Recrystallization in Polycrystalline Nickel-Copper Alloys
- On the Demagnetizing Factor of Cylindrical Rods