Cr-Mo鋼のクリープ脆化とその評価方法(昭和60年度秋季全国大会論文発表講演論文)
スポンサーリンク
概要
- 論文の詳細を見る
This investigation was carried out to clarify the cause of cracks which are often detected in the 1 1/4Cr- 0.5Mo steel chemical reactor vessel in use. Furthermore, the prevention of such cracks and rapid evaluation of creep embrittlement were also examined. Firstly, appearance of cracks detected was investigated by the light microscope and SEM. The cracks were identified as the typical intergranular fracture initiated and propagated in the coarse grained HAZ adjacent to the fusion line of weldment. Grain boundary segregation of impurities such as Sn, Sb and S was revealed by Auger electron spectroscopy. Secondary, several kinds of test including creep rupture test and high temperature tention test with slow extention rate technique (SERT) were conducted with the synthetic weld HAZ specimens directly sampled from the materials in which cracks were detected. Results of the creep rupture test indicated the creep embrittlement behavior of specimens clearly by the low creep ductility and the small notch rupture strength ratio. Creep rupture strength of notched specimen coincided with the stress applied to the part of the reactor vessel where cracks were detected. As a result, it was verified that cracks detected were due to the creep embrittlement phenomenon. Thirdly, it was confirmed that reheat treatment (900℃) was available to prevent the creep embrittlement of coarse grained weld HAZ. Finally, SERT test using notched specimen was usefull for the accelerated evaluation of creep embrittlement by taking notice of fracture mode. In addition to high temperature atmosphere, such technique is also available for reappearance of damage caused by high temperature and high pressure hydrogen surroundings.
- 社団法人溶接学会の論文
- 1985-08-05
著者
関連論文
- 524 低炭素 9Cr 1Mo V Nb 鋼の溶接性 : 高速増殖炉用構造材料の開発第二報(耐熱鋼・耐熱合金 (1), 材料, 日本鉄鋼協会第 107 回(春季)講演大会)
- 662 一方向凝固法による耐水素誘起割れ性厚鋼板の開発(厚板 (II) (ラインパイプ素材, 80∿100kgf/mm^2 級鋼他), 油井管, 材料, 日本鉄鋼協会第 114 回(秋季)講演大会)
- 614 21/4Cr-1Mo 鋼の高温強度特性に及ぼす合金元素の影響 : 高強度 2 1/4Cr-1Mo 鋼の開発第 1 報(厚鋼板の加速冷却・直接焼入れ, 厚鋼板, 材料, 日本鉄鋼協会第 113 回(春季)講演大会)
- 563 溶接低温割れ感受性の低い焼準型 2 1/4Cr-1Mo 極厚鋼板の開発(電磁鋼, 圧力容器鋼, 材料, 日本鉄鋼協会第 109 回(春季)講演大会)
- 700 極厚 1 1/4Cr-1/2Mo 鋼の靱性改善 : 極厚 1 1/4Cr-1/2Mo 鋼の材質安定化第 5 報(圧力容器 (1), (2), 材料, 日本鉄鋼協会第 106 回(秋季)講演大会講演)
- 666 連続鋳造製 Cr-Mo 鋼板の性能(圧力容器鋼, 材料, 日本鉄鋼協会 第 105 回(春季)講演大会)
- 584 引張せん断疲労強度に及ぼす諸因子の影響 : スポット溶接継手の疲労強度(第 1 報)(工具鋼・軸受鋼・疲れ (1)(2), 材料, 日本鉄鋼協会第 107 回(春季)講演大会)
- 154 高張力薄鋼板のスポット溶接性におよぼす板厚の影響
- 335 缶用材の溶接現象 : 缶用材の抵抗シーム溶接第 1 報(電気めつき・缶用材料・溶融めつき・高強度亜鉛鉄板, 加工, 日本鉄鋼協会 第 102 回(秋季)講演大会)
- 428 亜鉛めっき鋼板のスポット溶接性(第2報) : 連続打点溶接性
- 427 亜鉛めっき鋼板のスポット溶接性(第1報) : 適正溶接電流におよぼすめっき層の影響
- 565 極厚低 C-9Cr1MoVNb 鋼の諸特性 : 第三報高速増殖炉用構造材料の開発(再結晶, 集合組織, 電磁鋼板, 材料, 日本鉄鋼協会第 112 回(秋季)講演大会)
- 304 大型石油貯槽の溶接施工に関する研究 : 第2報 靱性評価について
- 637 強度・靱性に優れた極厚 3Cr-1Mo 鋼板の開発(圧力容器 (1)(2)・低温用鋼, 材料, 日本鉄鋼協会第 107 回(春季)講演大会)
- 358 圧力容器用鋼のクリープ脆化とその評価(橋梁, 造船用部材, 構造物の耐久, 信頼性, 加工・システム・利用技術, 日本鉄鋼協会第 114 回(秋季)講演大会)
- 437 SERT試験法による高合金溶接熱影響部のクリープ脆化の評価
- Cr-Mo鋼のクリープ脆化とその評価方法(昭和60年度秋季全国大会論文発表講演討論記録)
- 圧力容器用鋼溶接熱影響部のクリ-プ脆化とその改善 (溶接技術特集) -- (基盤技術)
- 593 低炭素-3Cr-1Mo-V-Nb 鋼の高温強度特性(圧力容器・破壊靱性・加速冷却・制御圧延 (1), 材料, 日本鉄鋼協会第 110 回(秋季)講演大会)
- Cr-Mo鋼のクリープ脆化とその評価方法(昭和60年度秋季全国大会論文発表講演論文)
- 229 Cr-Mo-V鋼の再熱割れ感受性
- Cr-Mo鋼のクリープ脆化と水素侵食(昭和60年度春季全国大会シンポジウム)
- 334 圧力容器用鋼板の低温割れ感受性
- 667 一方向凝固法による極厚鋼板の品質 : 一方向凝固鋳造による極厚鋼板製造技術の開発第 3 報(圧力容器鋼, 材料, 日本鉄鋼協会 第 105 回(春季)講演大会)
- 高電流密度ガスシールド溶接金属の組織と靱性改善について
- 330 高電流密度立向ガスシールドアーク溶接の研究(第4報)
- 329 高電流密度立向ガスシールドアーク溶接の研究(第3報)
- 121 耐溶接割れ性60^鋼による球型タンクの溶接施工について
- 310 高電流密度立向ガスシールドアーク溶接の研究(第2報) : HT60貯油タンク側板への適用と安全性の検討
- 309 高電流密度立向ガスシールドアーク溶接の研究(第1報) : 低入熱化と溶接部の靭性改善について
- 118 高電流密度ガスシールド溶接金属の組織と靭性について
- 214 Al-B 系窒化物の析出挙動(高張力鋼, 性質, 日本鉄鋼協会第 89 回(春季)講演大会)
- 124 調質型60キロ級高張力鋼の研究 : 耐ワレ性60キロ鋼について
- 773 高張力薄鋼板の疲労強度に及ぼす切欠穴の影響(冷延薄板・薄板成形性, 材料, 日本鉄鋼協会第 104 回(秋季)講演大会)
- 高強度薄鋼板の疲労強度(溶接・疲労)(高強度薄鋼板)
- Cr-Mo 鋼のクリープ脆化とその評価方法