Porcelain Veneer Bonding to Enamel with Plasma-arc Light Resin Curing
スポンサーリンク
概要
- 論文の詳細を見る
The resin bond strength of plasma-arc curing in restorative dentistry was investigated in comparison to halogen-light curing with respect to two kinds of thickness, shade and opacity of porcelain laminate veneers. The bond strength of the light-cured resin was evaluated by shear tests and SEM observations of the fracture surfaces, and the results were interpreted in terms of the degree of resin polymerization. It was found that plasma-arc curing for 6 s was sufficient to obtain bond strengths similar to those of specimens polymerized with halogen light for 40 s, whereas the plasma-arc curing time needed to be doubled to 12 s in order to achieve similar failure patterns for a darker-shade porcelain of 2 mm thickness. The bond strength achieved by plasma-arc curing was found to be relatively unaffected by the shade or opacity of porcelain.
- 日本歯科理工学会の論文
著者
-
YATANI Hirofumi
Department of Fixed Prosthodontics, Okayama University Graduate School of Medicine and Dentistry
-
MINE Atsushi
Department of Oral and Maxillofacial Rehabilitation, Okayama University Graduate School of Medicine,
-
Mine Atsushi
Department Of Oral And Maxillofacial Rehabilitation Okayama University Graduate School Of Medicine D
-
Mine Atsushi
Department Of Oral And Maxillofacial Rehabilitation Okayama University Graduate School Of Medicine A
-
Mine Atsushi
College Of Bioresource Sciences Nihon University
-
Watanabe Kazuto
Tokyo Metropolitan College Of Technology
-
Yatani Hirofumi
Division Of Oral Maxillofacial Regeneration Graduate School Of Dentistry Osaka University
-
Yatani Hirofumi
Department Of Fixed Prosthodontics
-
Yatani Hirofumi
Department Of Oral And Maxillofacial Rehabilitation Okayama University Graduate School Of Medicine A
-
Watanabe Kouichi
Division Of Biomaterial Science Department Of Oral Health Science Niigata University Graduate School
-
WATANABE Kazumi
Department of Oral and Maxillofacial Rehabilitation, Okayama University Graduate School of Medicine
-
OHNISHI Eiji
Department of Oral and Maxillofacial Rehabilitation, Okayama University Graduate School of Medicine
-
KANESHIMA Takushi
Private office dentist, Kaneshima Dental Office, Okayama, Japan
-
Watanabe Kazumi
Department Of Mechanical Engineering Faculty Of Engineering Yamagata University Yonezawa Yamagata 99
-
Mine Atsushi
Leuven Biomat Research Cluster Department Of Conservative Dentistry School Of Dentistry Oral Patholo
-
Ohnishi Eiji
Department Of Biology Tokyo Metropolitan University
-
Ohnishi Eiji
Department Of Oral And Maxillofacial Rehabilitation Okayama University Graduate School Of Medicine A
-
Kaneshima Takushi
Private Office Dentist Kaneshima Dental Office Okayama Japan
-
Watanabe Kazumi
Department Of Mechanical Engineering Faculty Of Engineering Yamagata University
-
Watanabe K
Department Of Oral And Maxillofacial Rehabilitation Okayama University Graduate School Of Medicine A
-
Watanabe Kouichi
Division Of Biomaterial Science Department Of Oral Health Science Niigata University Graduate School
関連論文
- P-20 有機薄膜をコーティングしたチタン表面に析出するリン酸カルシウムの特性(セラミックス,一般講演(ポスター発表))
- P-26 真空練和容器とスパチュラに付着した水滴量に対する振りきり操作の有効性(器械・技術,一般講演(ポスター発表))
- P-111 タンパク質を含む人工唾液中における金銀パラジウム合金の溶出挙動(細胞・溶出,一般講演(ポスター発表),第54回日本歯科理工学会学術講演会)
- P-104 0.7mmφ以下のCo-Cr合金線を使用したスープラバルジ型隣接面鉤の維持力 : 上顎中切歯用可撤性部分床義歯の場合(臨床応用,一般講演(ポスター発表),第48回日本歯科理工学会学術講演会)
- A-5 歯科インプラントの表面特性について(第四報) : ラット骨内から摘出された溝加工チタン試料の表面分析(生体反応2,一般講演(口頭発表),第48回日本歯科理工学会学術講演会)
- 歯科インプラントの表面特性について (第三報) : ラット骨内から摘出されたチタン鏡面試料の表面分析(インプラント1, 平成17年度秋期 (長崎) 第46回日本歯科理工学会学術講演会)
- A-03 歯科インプラントの表面特性について(第二報) : ラット骨内埋入・摘出チタン試料の表面分析(インプラントII)(平成16年秋期第44回日本歯科理工学会学術講演会)
- P-124 真空練和容器とスパチュラに付着した水滴量が混水比におよぼす影響(レーザー・研磨・器械技術,一般講演(ポスター発表),第54回日本歯科理工学会学術講演会)
- P-86 イオン液体の電解 : チタンの表面に生成する有機薄膜(チタン・鋳造・腐食,一般講演(ポスター発表),第54回日本歯科理工学会学術講演会)
- A-30 歯科インプラントの表面特性について(第5報) : 表面テクスチャーと吸着生体分子の関係(生体反応・毒性,一般講演(口頭発表),第54回日本歯科理工学会学術講演会)
- P-58 陽極酸化した矯正用Ni-Tiワイヤのフッ化物を含む酸性溶液中での腐食(金属,一般講演(ポスター発表),第53回日本歯科理工学会学術講演会)
- P-55 極性反転によるチタンの陽極酸化 : アルカリ性電解液の場合(金属,一般講演(ポスター発表),第53回日本歯科理工学会学術講演会)
- P-50 リン酸カルシウム水溶液中での極性反転によるチタンの陽極酸化 : 陽極酸化時の電流密度が析出する結晶相とその大きさにおよぼす影響(金属・チタン,第52回日本歯科理工学会学術講演会)
- P-32 金属微粒子の到達高さを傍証として用いた歯科診療室内における粉塵の挙動(臨床応用,第52回日本歯科理工学会学術講演会)
- P-46 水酸化カルシウム溶液中での矯正用Ni-Tiワイヤの陽極酸化(歯科用金属・鋳造,第51回日本歯科理工学会学術講演会)
- P-9 極性反転によるNb,TaとZrの陽極酸化 : 電解液のpHが析出するリン酸カルシウムの形態におよぼす影響(セラミックス,第51回日本歯科理工学会学術講演会)
- P-52 Nb, TaとTiおよびZrの極性反転による陽極酸化 : リン酸水溶液中で生成した酸化被膜のXPS分析(腐食, 第49回日本歯科理工学会学術講演会)
- P-39 水酸化ナトリウム溶液中での矯正用Ni-Tiワイヤーの陽極酸化(チタン, 第49回日本歯科理工学会学術講演会)
- P-79 CaとPを含む溶液中でチタンの陽極酸化により析出したナノ粒子のXPS分析(無機,一般講演(ポスター発表),第48回日本歯科理工学会学術講演会)
- Ca, Pを含む溶液中でのチタンの陽極酸化 : 析出するリン酸カルシウムの形態(生体用セラミックス, 平成17年度秋期 (長崎) 第46回日本歯科理工学会学術講演会)
- 高熱伝導性を有するセラミックス鋳型によるチタン鋳造の可能性 : hBN板を用いた高温鋳型の場合(チタン, 平成17年度秋期 (長崎) 第46回日本歯科理工学会学術講演会)
- P-08 高熱伝導性セラミックス鋳型によるチタン鋳造の可能性(チタン)(平成16年秋期第44回日本歯科理工学会学術講演会)
- Regulatory Mechanism of Human Connective Tissue Growth Factor (CTGF/Hcs24) Gene Expression in a Human Chondrocytic Cell Line, HCS-2/8^1
- P-13 有機薄膜をコーティングしたチタン表面に析出するリン酸カルシウムの特性 : 有機薄膜がリン酸カルシウムの析出におよぼす影響(チタン,一般講演(ポスター発表),第56回日本歯科理工学会学術講演会)
- P-30 さまざまな環境におけるPMMAの劣化(第1報) : XPSによるPMMA表面測定の分析注意点(レジン,一般講演(ポスター発表),第56回日本歯科理工学会学術講演会)
- Characterization of calcium phosphate deposited on valve metal by anodic oxidation with polarity inversion
- Surface analysis of commercially pure titanium implant retrieved from rat bone : part 1 : Initial biological response of sandblasted surface
- Chemical mechanical polishing of titanium with colloidal silica containing hydrogen peroxide : mirror polishing and surface properties
- Spectroscopic Characterization of Enamel Surfaces Irradiated with Er:YAG Laser
- Effect of 4-MET- and 10-MDP-based Primers on Resin Bonding to Titanium
- Effect of dentin location and long-term water storage on bonding effectiveness of dentin adhesives
- Large-area electron beam irradiation for surface polishing of cast titanium
- Measurement of Masticatory Movement by a New Jaw Tracking System Using a Home Digital Camcorder
- New Evaluation Method by Microfocus Radiograph CT for 3D Assessment of Internal Adaptation of All-Ceramic Crowns
- 3D Shape Measurement of Dental Casts Using Medical X-ray CT
- Surface Properties of Electrochemically Buffed Titanium Casting
- Synthetic Osteopontin-derived Peptide SVVYGLR can Induce Neovascularization in Artificial Bone Marrow Scaffold Biomaterials
- P-09 Ca, Pを含む溶液中でのチタンの陽極酸化 : 低電圧で陽極酸化した場合の酸化皮膜の構造(チタン)(平成16年秋期第44回日本歯科理工学会学術講演会)
- Initial Evaluation of a Ceramic Form as a Reconstructive Material for Bone Defects
- Effect of Carboxyl Group in O-Methacryloyl-N-Acyl Tyrosines on Adhesiveness to Unteched Human Dentin
- Correlation of Dentin Bond Durability with Water Absorption of Bonding Layer
- Steric Effects of N-Acyl Group in O-Methacryloyl-N-Acyl Tyrosines on the Adhesiveness of Unetched Human Dentin
- A Small-molecule Approach to Bone Regenerative Medicine in Dentistry
- Adhesion of hollow calcium-deficient hydroxyapatite microspheres onto titanium
- Morphological and Chemical Characterizations of the Interface of a Hydroxyapatite-coated Implant
- New method for quantitative mapping of metallic elements in tissue sections by electron probe microanalyser with wavelength dispersive spectrometers
- New Partition Technique for Two-chamber Pressure Casting Unit for Titanium
- Zoledronic acid delays wound healing of the tooth extraction socket, inhibits oral epithelial cell migration, and promotes proliferation and adhesion to hydroxyapatite of oral bacteria, without causing osteonecrosis of the jaw, in mice
- Fracture Resistance of Inlay-retained Fixed Partial Dentures Reinforced with Fiberreinforced Composite
- In Vitro Study on Marginal and Internal Fit of CAD/CAM All-Ceramic Crowns
- Application of a Dental CAD/CAM System to the Production of All-ceramic Crowns
- Nitrosomonas communis Strain YNSRA, an Ammonia-Oxidizing Bacterium, Isolated from the Reed Rhizoplane in an Aquaponics Plant(ENVIRONMENTAL BIOTECHNOLOGY)
- Porcelain Veneer Bonding to Dentin and the Curing Performance of Plasma-arc Light with Respect to Porcelain Thickness
- Porcelain Veneer Bonding to Enamel with Plasma-arc Light Resin Curing
- Application of haptic device to implant dentistry : accuracy verification of drilling into a pig bone
- Internal Porosity of Cast Titanium Removable Partial Dentures : Influence of Sprue Design on Porosity in Clasps
- Electrophoretic Deposition Behavior of Ceria-stabilized Zirconia/Alumina Powder
- Effect of dentin location and long-term water storage on bonding effectiveness of dentin adhesives
- A Preliminary Evaluation of Electromyographic Activities of Masseter Muscles during Speech in Myalgia Patients
- Tyrosinase in Drosophila virilis
- Relations Among TMD, Bruxism, Lifestyle, and Psychological Stress
- Chewing Side Continuity and Masticatory Performance
- Analysis of Internal Defects in All-ceramic Crowns Using Micro-focus X-ray Computed Tomography
- Stress Analysis of Endodontically Treated Anterior Teeth Restored with Different Types of Post Material
- In Vitro Study on Marginal and Internal Fit of CAD/CAM All-ceramic Crowns
- Finite Element Analysis of Fiber-reinforced Fixed Partial Dentures
- Non-Working Contact Does Not Initiate Primary Occlusal Trauma
- Immediate Loading of Implants in a Completely Edentulous Maxilla Using Flapless Surgery
- Tensile bond strength between tooth-colored porcelain and sandblasted zirconia framework
- Application of Elliptic Toothed Wheel to Yarn Twisting Machine
- Transmission of Wave Energy through an Imperfectly Bonded Interface between a Layer and a Half-Space of Dissimilar Elastic Solids
- Deep venous thrombosis, myocardial infarction, and occlusion of vascular access associated with heparin-induced thrombocytopenia in a diabetic hemodialysis patient
- Trace elements on the surface of titanium implants extracted from rat bone
- An ambulatory bruxism recording system with sleep-stage analyzing function
- Usability of an Ambulatory Bruxism Recording System with Sleep-Stage Analyzing Function
- Relationship between Temporomandibular Joint Disc Position and Configuration on Magnetic Resonance Imaging
- Melanin Formation in the Mutant 'Ebony'of Drosophila melanogaster
- Activation of Tyrosinase in Drosophila virilis
- The Relationship between Mandibular Position and Sole Pressure
- Gender Differences in Neuroselective Current Perception Thresholds of the Trigeminal and Median Nerves
- Transient Response of an Inhomogeneous Elastic Hollow Cylinder to an Impulsive Line SH-source
- Transient Response of an Inhomogeneous Elastic Solid to an Impulsive SH-source : Variable SH-wave Velocity
- The effect of adding silica to zirconia to counteract zirconia's tendency to degrade at low temperatures
- Casting Pressure in Two Types of Titanium Casting Equipment
- P-37 直接法リライン材の撹拌脱泡に対する公転・自転式ミキサーの有効性(レジン・コンポジットレジン,一般講演(ポスター発表),第58回日本歯科理工学会学術講演会)
- P-35 低エネルギー電子線照射がPMMA表面に与える影響(レジン・コンポジットレジン,一般講演(ポスター発表),第58回日本歯科理工学会学術講演会)
- P-31 極性交互反転電解によって生成するチタン酸化皮膜の厚さとリン酸カルシウムの析出(生体用セラミックス・陶材,一般講演(ポスター発表),第58回日本歯科理工学会学術講演会)
- P-30 歯科用合金の腐食 : 第1報 口腔内から撤去した歯科用合金の表面分析(腐食,一般講演(ポスター発表),第58回日本歯科理工学会学術講演会)
- P-17 歯科用合金のフッ素含有溶液における腐食挙動 : 第一報 銀合金における初期の腐食反応(歯科用合金,一般講演(ポスター発表),第58回日本歯科理工学会学術講演会)
- P-36 歯科材料・器械に関する卒後研修におけるワークショップの有効性 : アンケート調査による検討(臨床応用,一般講演(ポスター発表),第59回日本歯科理工学会学術講演会)
- The relationship between milling a new silica-doped zirconia and its resistance to low-temperature degradation (LTD) : a pilot study
- Effect of low-shrinking composite on the bonding effectiveness of two adhesives in occlusal Class-I cavities
- Influence of resin coating materials on Porphyromonas gingivalis attachment
- P-66 極性交互反転電解によってマグネシウムおよびその合金表面に析出するリン酸カルシウムの特性(ジルコニア・陶材・セメント・埋没材,一般講演(ポスター発表),第60回日本歯科理工学会学術講演会(創立30周年記念大会))
- P-38 粉液型リライン材の混和時における公転・自転式ミキサーの使用が機械的強度に与える影響(レジン・コンポジットレジン・印象材,一般講演(ポスター発表),第60回日本歯科理工学会学術講演会(創立30周年記念大会))
- P-35 常温重合型アクリルレジンの改質 : ポリマー粒子への低エネルギー電子線照射の効果(レジン・コンポジットレジン・印象材,一般講演(ポスター発表),第60回日本歯科理工学会学術講演会(創立30周年記念大会))
- A-28 流動性の異なるコンポジットレジンにおけるフィラーおよびレジンの特性(コンポジットレジン,一般講演(口頭発表),第60回日本歯科理工学会学術講演会(創立30周年記念大会))
- The effect of adding silica to zirconia to counteract zirconia's tendency to degrade at low temperatures
- Calcium phosphates deposited on titanium electrode surface —Part 1: Effect of the electrode polarity and oxide film on the deposited materials
- Regulatory Mechanism of Human Connective Tissue Growth Factor (CTGF/Hcs24) Gene Expression in a Human Chondrocytic Cell Line, HCS-2/8.