333 CFRP/ アルミニウム積層アクチュエータの特性向上

概要

論文の詳細を見る
Thispaper describes fabrication of higher performance CFRP/aluminum laminate actuators by investigating various factors such as mechanical properties of aluminum plate, bonding strength between FRP prepreg and aluminum plate, and glass transition temperature of the matrix resin. According to the experimental results, the follwing conclusions were obtained. (1) Curvature of the actuator increases with increasing proportional elastic limit of the aluminum plate in the experimental range. (2) In order to maintain high bonding strength between the aluminum plate and the FRP prepreg up to higher temperature range, roughness must be given on the aluminum plate or the matrix resin must be replaced with higher glass transition temperature one. (3) The force generated by an actuator made of higher temperature (453K) cure type epoxy linearly increases with increasing temperature up to higher temperature range compared with that of lower temperature (393K) one and the maximum force reaches about 1.5 times that of lower temperature one.
一般社団法人日本機械学会の論文
2000-07-31