高硬度鋼の疲労強度に及ぼす研削加工の影響 : 第1報, CBNおよびWA砥粒による研削によって生じる被削材の表面性状

概要

論文の詳細を見る
A highly hardened steel (SK 5) was ground with CBN or WA abrasive grains, and some features of ground surfaces (structure, hardness, residual stress, etc.) were studied. It was found that spark-out raised compressive residual stress near the ground surfaces in every case, especially when CBN abrasive grains were used. This suggests the effectiveness of spark-out in raising fatigue strength. It was also found that grinding with CBN abrasive grains raised the hardness, in contrast to the lowering of the hardness after the grinding with WA abrasive grains. This suggests a rise in the wear resistance due to the grinding with CBN abrasive grains, contrary to the case of grinding with WA abrasive grains. The above-mentioned difference caused by the difference of the abrasive grains may be attributed to the difference in the heat conductivity, etc., of the abrasive grains, which caused the difference in the structure of the ground surfaces.
一般社団法人日本機械学会の論文
1990-08-25