Numerical Prediction of Gas Flow in the Intake Ports of Four-cycle Internal Combustion Engines : 1st Report, Method of Numerical Analysis
スポンサーリンク
概要
- 論文の詳細を見る
This paper describes a method for estimating the induction swirl intensity by means of numerical simulation of the gas flow in the intake ports of four-cycle engines. Three-dimensional flow of compressible viscous gas in the intake port has been calculated for intake stroke in order to predict the effect of the configuration of the intake port, especially the configuration of the helical port, on the induction swirl intensity. Cartesian coordinates are used to simulate the unsteady flow field in the model passage of the intake port. The results show that the present method is applicable to the investigation of the flow in the intake ports, and that the volumetric efficiency and induction swirl intensity can be estimated from the distribution of the calculated outflow velocity around the intake valve.
- 一般社団法人日本機械学会の論文
著者
-
ISSHIKI Yoshihiro
Setsunan University
-
Wakisaka Tomoyuki
Department Of Mechanical Engineering Osaka City University
-
Wakisaka Tomoyuki
Department Of Mechanical And Physical Engineering Graduate School Of Engineering Osaka City Universi
-
Shimamoto Y
Univ. Shiga Prefecture Shiga Jpn
-
Shimamoto Yuzuru
Department Of Mechanical Engineering Kyoto University.
-
ISSHIKI Yoshihiro
Department of Mechanical Engineering, Faculty of Engineering, Setsunan University
関連論文
- Effect of Material and Thickness about Tail Fins on Propulsive Performance of a Small Fish Robot
- Prediction of Performance for Two-Stage Turbocharged Four Cycle Diesel Engines
- Prediction of Performance of Turbocharged Four Cycle Diesel Engines
- Intake Noise and Behavior of Exhaust Valve on the Condition of Exhaust Braking in Automotive Engines : Series B : Fluid Engineering, Heat Transfer, Combustion, Power, Thermophysical, Properties
- An Attempt to Improve the Characteristics of Volumetric Efficiency by a Resonator in Four Cycle Diesel Engines : Heat Transfer, Combustion, Power,Thermophysical Properties
- Numerical Prediction of Mixture Formation and Combustion Processes in Premixed Compression Ignition Engines(Recent Combustion Technology in Internal Combustion Engines)
- (1-16) Numerical Prediction of Mixture Formation and Combustion Processes in Premixed Compression Ignition Engines((NCS-1)Novel Combustion Systems 1-Homogeneous Charge, Premixed Charge Compression Ignition Engines)
- A study on the formation of vertical vortex in the cylinder of an I.C. engine using CFD : Effect of intake valve closing timing
- Influence of the Connecting Passage of a Low Pressure Indicator on Recording
- Construction of a Chemical Kinetic Model for Three-dimensional Numerical Analysis of the Combustion in a Natural Gas Engine Ignited with Gas Oil
- Application of a Genetic Algorithm to the Optimization of Rate Constants in Chemical Kinetic Models for Combustion Simulation of HCCI Engines(Advanced Combustion Technology in Internal Combustion Engines)
- Application of a Genetic Algorithm to the Optimization of Rate Constants in Chemical Reaction Submodels for Engine Combustion Simulation(Computation Technology)
- Limits of Flame Propagation in Two-Stroke Cycle Gasoline Engines
- Improvement in a droplet breakup model for numerical analysis of fuel sprays
- Numerical Analysis of the Diffusion Process of Intake Mixture in Dual-Intake Valve Engines
- Numerical Prediction of Gas Flow in the Intake Ports of Four-Cycle Internal Combustion Engines : Improvement of Accuracy by Applying a Porosity Approach
- Numerical Prediction of Gas Flow in the Intake Ports of Four-cycle Internal Combustion Engines : 1st Report, Method of Numerical Analysis
- Numerical Simulation of Gas Flows in the Cylinders of Four-stroke Cycle Ergines : 1st Report, Analysis of the Process of Swirl Generation during Intake Stroke
- Turbulence characteristics in Internal Combustion Engines
- Effects of Mixture Turbulence on the Limits of Flame Propagation
- Multidimensional Simulation of NO and Soot from D.I. Diesel Engines with Fuel Injection Rate Shaping
- (3-08) Influence of Physical and Chemical Properties of Biodiesel Fuel on Injection, Combustion and Exhaust Emission Characteristics in a DI-CI Engine((AF-3)Alternative Fuels 3-Biomass Fuels and Fuel Design)
- HC3-3: Prediction of Ignition Timing and Combustion Process in Gasoline HCCI Engines by Means of Zero-dimensional Chemical Kinetics Calculation in Consideration of Combustion Characteristic Time(HC: HCCI Combustion,General Session Papers)
- CT2-1: Application of a Reduced Elementary Reaction Scheme to Three-dimensional Numerical Simulation of Knocking Phenomenon in a Spark Ignition Engine Fueled by LPG-DME Mixture(CT: Combustion, Thermal and Fluid Science,General Session Papers)