An Attempt to Improve the Characteristics of Volumetric Efficiency by a Resonator in Four Cycle Diesel Engines : Heat Transfer, Combustion, Power,Thermophysical Properties
スポンサーリンク
概要
- 論文の詳細を見る
Through numerical calculations based on a simulation program, the effect of a resonator, which is installed in intake manifolds, has been investigated for the purpose of improving the volumetric efficiency of four cycle diesel engines. The results show that in single cylinder engines a resonator can increase the volumetric efficiency at low engine speeds without decreasing volumetric efficiency in the high speed range. The diameter of the resonator pipe must be chosen to generate an adequate flow loss in the resonator. The optimum sizes of the resonator can not be estimated simply by the natural acoustic frequency. However, the ratio of the natural frequency of the resonator to that of the intake system for the open period of the intake valve may be used to estimate roughly the resonator effect. The resonator effect is considered to be slight in multi-cylinder engines.
- 一般社団法人日本機械学会の論文
著者
-
Choi Jae-sung
Korea Maritime University
-
SHIMAMOTO Yuzuru
Faculty of Engineering, Kyoto University
-
KANAMARU Kazuhiro
Faculty of Engineering, Kyoto University
-
MAEDA Ichiro
Kinki Nippon Railway Co. LTD.
-
Shimamoto Y
Univ. Shiga Prefecture Shiga Jpn
-
Shimamoto Yuzuru
Faculty Of Engineering Kyoto University
-
Kanamaru Kazuhiro
Faculty Of Engineering Kyoto University
関連論文
- Prediction of Performance for Two-Stage Turbocharged Four Cycle Diesel Engines
- Prediction of Performance of Turbocharged Four Cycle Diesel Engines
- Intake Noise and Behavior of Exhaust Valve on the Condition of Exhaust Braking in Automotive Engines : Series B : Fluid Engineering, Heat Transfer, Combustion, Power, Thermophysical, Properties
- An Attempt to Improve the Characteristics of Volumetric Efficiency by a Resonator in Four Cycle Diesel Engines : Heat Transfer, Combustion, Power,Thermophysical Properties
- Effect of the Induction Pipe in a Crankcase-Scavenged Two-Cycle Engine
- Improvement in a droplet breakup model for numerical analysis of fuel sprays
- Numerical Analysis of the Diffusion Process of Intake Mixture in Dual-Intake Valve Engines
- Numerical Prediction of Gas Flow in the Intake Ports of Four-Cycle Internal Combustion Engines : Improvement of Accuracy by Applying a Porosity Approach
- Numerical Prediction of Gas Flow in the Intake Ports of Four-cycle Internal Combustion Engines : 1st Report, Method of Numerical Analysis
- Numerical Simulation of Gas Flows in the Cylinders of Four-stroke Cycle Ergines : 1st Report, Analysis of the Process of Swirl Generation during Intake Stroke
- Method of Optimizing Turbocharged Engine Systems