The Effect of Atmosphere on the Frequency Effect in the High Temperature Fatigue of a Carbon Steel
スポンサーリンク
概要
- 論文の詳細を見る
The atmospheric effect on the frequency effect was studied in the high temperature fatigue of a carbon steel by using dried town gas as an inert environment. At 550℃, the fatigue strength was higher in gas than in air in the long life test under low stress levels owing to the reduction of corrosion fatigue effects by high temperature oxidation. At 400℃, the effect of gas was hardly found on fatigue strengths. Considerations were made on the frequency effect in stress τ-rupture time t curves and in plastic strain amplitude γ_p-cycles to rupture N curves. The relation of γ_pN<0.44>=K was obtained under various cyclic frequencies and various temperatures, covering a wide range of N. The value of K was larger for lower frequency than for higher frequency, the effect of frequency increasing at higher temperature. The deviation was found after long time in the air, due to corrosion fatigue by high temperature oxidation.
- 一般社団法人日本機械学会の論文
著者
-
Endo Kichiro
Faculty Of Engineering Kyoto University
-
Endo Kichiro
Faculty Of Engineering Hiroshima University
関連論文
- The Influence of Load-Difference in Reciprocating Stroke on the Lubricated Wear
- Effects of Cycle Frequency on Fretting Fatigue Life of Carbon Steel
- Estimation of Corrosion Fatigue Strength by Corrosion Resistance and Notch Sensitivity of Materials
- Wear of Steel in the Lubricating Oil Containing Abrasive Particles
- Further Study on the Crack Depth and the Low Temperature Embrittlement of a Carbon Steel Subjected to Corrosion Fatigue
- Influences of Secondary Stress Fluctuations of Small Amplitude on Low Cycle Corrosion Fatigue
- Fatigue Crack Propagation of Steel in Oil
- Fatigue Crack Propagation in Bearing Metals Lining on Steel Plates in Lubricating Oil
- Fundamental Studies on Cavitation Erosion
- Wear of Metals in the Lubricating Oil Containing Solid Particles : Effects of Diameter of Partlcles and Contact Pressure
- On the Crack Length and the Low Temperature Brittleness of a Carbon Steel Subjected to Corrosion Fatigue
- Influences of Stress Cycle Frequency on Propagation of Corrosion Fatigue Cracks
- The Effects of Atmosphere on Fatigue Crack Propagation
- Wear of Metals in Corrosive Environments
- On the Study of Thermal Fatigue of Bearing Metals Lining on Steel Plates
- The Effect of Atmosphere on the Frequency Effect in the High Temperature Fatigue of a Carbon Steel
- Studies on the Size Effect of Bending and Twisting Fatigue Strength
- Fundamental Studies of Cavitation Erosion : In the Case of Low Cavitation Intensity
- Fatigue Strength of White Metal Lining on Steel Plate
- Fretting Fatigue Strength of Several Materials Combinations
- Fatigue Strength of Bearing Metals Lining on Steel Plates in Lubricating Oil
- Erosion Damages of Sintered Metals
- Plastic Strain Fatigue of High Tensile Steel in Corrosive Media
- Effects of Cycle Frequency on the Corrosion Fatigue Strength
- A Study of Fatigue Crack Propagation in a Coating Film on Base Metal
- Wear Behaviours of Metals under Lubricated Condition and the Effect of Small Electric Potential
- The Wear of Steel in Lubricating Oil under Varying Load
- Erosion of Bearing Alloys in Oil Film
- Environmental Effects on Initiation and Propagation of Fatigue Cracks in High Strength Steel