Effects of Entrained Air on the Performance of Centrifugal Pumps : 2nd Report, Effects of number of blades
スポンサーリンク
概要
- 論文の詳細を見る
To investigate the effects of the number of impeller blades on the pump performance under air admitting conditions, tests were carried out for semi-open impellers having three, five and seven blades, respectively. The flow patterns in the impellers were also observed. When the number of impeller blades is sufficient, namely, five or seven, the flow pattern in the impeller is not altered substantially by air admission, and the performance of the pumps is decreased in a similar tendency. An impeller with three blades, however, shows an abnormal tendency in a small air range 9_s/Q ≦ 0.03,namely, the head developed is increased by the admitted air, when φ_0 > 0.03. The admitted air improves considerably the unevenness of flow pattern due to the unreasonable form of the impeller passages, and causes an increase of the impeller work and the pump head. When the air quantity is increased further, all of the pump performances fall repidly and the pumps lose their prime. With knowledges of the test data under a pure water running, an assessment of the pump performance under the air admitting conditions is made.
- 一般社団法人日本機械学会の論文
著者
-
Murakami Mitsukiyo
Faculty Of Engineering Nagoya University
-
Minemura Kiyoshi
Faculty Of Engineering Nagoya University
関連論文
- Hydraulic Losses and Flow Patterns in Bent Pipes : Comparison of the Results in Wavy Pipes and Quasi-coiled Ones
- Effects of Entrained Air on the Performance of a Centrifugal Pump : 1st Report, Performance and Flow Conditions
- A Study on the Hydraulic Loss of Tubular Coils
- Pipe Flow under the Influence of Coriolis is Forces
- An Experimental Study of Swirling Flow in Pipes
- Pipe Flow under the Influence of a Coriolis Force : 2nd Report, Experiments and Analysis of the Wavy Flow in a Rotating Pipe
- Effects of Running Clearance of Semi-Open Impeller Pumps under Air Admitting Conditions
- Effects of Entrained Air on the Performance of Centrifugal Pumps : 2nd Report, Effects of number of blades
- Swirling Flow in Suction Pipe of Centrifugal Pumps : 1st Report, Distribution of Velocity and Energy
- Swirling Flow in Suction Pipe of Centrifugal Pumps : 3rd Report, Effect of Bend in Pipe
- Stress Calculation on a Swirling Flow in Suction Pipe of Centrifugal Pumps
- Studies on fluid flow in three-dimensional bend conduits
- Swirling Flow in Suction Pipe of Centrifugal Pumps : 2nd Report, Distribution of Shearing Stress
- Studies on the hydraulic loss in pipe bends : Result for 90°-screw type elbows
- Hydraulic losses and flow patterns in pipes with two bends combined : Effects of bend curvature and wall roughness
- Effects of Swirling Flow Components on Discharge Coefficients of Elbow Flow Meters
- Effects of Rotation on Diffuser Flow
- Effects of Swirling Flow Components on Discharge Coefficients of Constriction Meters
- Flows In Rotating Diffusers : Effects of Diffuser Angle