Effects of Running Clearance of Semi-Open Impeller Pumps under Air Admitting Conditions
スポンサーリンク
概要
- 論文の詳細を見る
The performance of pumps with semi-open impellers was tested under air admitting conditions and the effects of running clearance between the impeller vanes and the stationary casing were discussed. The results were compared with those of closed-impeller pumps. when the clearance reduces, the pump ability under no air admission increases continuously, but the performance is much decreased by air admission. When the clearance relative to the channel depth of impellers λ is increased beyond 0.1, the drop of pump head due to air admission is much weakened, and it tends to a definite value, regardless of impeller shape. When two pumps with a closed-impeller and with a semi-open impeller show the same performance under no air admission, both pumps develop nearly the same performance under air admitting condition. The clearance range of λ=0.033〜0.086 is suitable for the duty of delivering air-water mixture.
- 一般社団法人日本機械学会の論文
著者
-
Murakami Mitsukiyo
Faculty Of Engineering Nagoya University
-
Minemura Kiyoshi
Faculty Of Engineering Nagoya University
関連論文
- Hydraulic Losses and Flow Patterns in Bent Pipes : Comparison of the Results in Wavy Pipes and Quasi-coiled Ones
- Effects of Entrained Air on the Performance of a Centrifugal Pump : 1st Report, Performance and Flow Conditions
- A Study on the Hydraulic Loss of Tubular Coils
- Pipe Flow under the Influence of Coriolis is Forces
- An Experimental Study of Swirling Flow in Pipes
- Pipe Flow under the Influence of a Coriolis Force : 2nd Report, Experiments and Analysis of the Wavy Flow in a Rotating Pipe
- Effects of Running Clearance of Semi-Open Impeller Pumps under Air Admitting Conditions
- Effects of Entrained Air on the Performance of Centrifugal Pumps : 2nd Report, Effects of number of blades
- Swirling Flow in Suction Pipe of Centrifugal Pumps : 1st Report, Distribution of Velocity and Energy
- Swirling Flow in Suction Pipe of Centrifugal Pumps : 3rd Report, Effect of Bend in Pipe
- Stress Calculation on a Swirling Flow in Suction Pipe of Centrifugal Pumps
- Studies on fluid flow in three-dimensional bend conduits
- Swirling Flow in Suction Pipe of Centrifugal Pumps : 2nd Report, Distribution of Shearing Stress
- Studies on the hydraulic loss in pipe bends : Result for 90°-screw type elbows
- Hydraulic losses and flow patterns in pipes with two bends combined : Effects of bend curvature and wall roughness
- Effects of Swirling Flow Components on Discharge Coefficients of Elbow Flow Meters
- Effects of Rotation on Diffuser Flow
- Effects of Swirling Flow Components on Discharge Coefficients of Constriction Meters
- Flows In Rotating Diffusers : Effects of Diffuser Angle