平歯車の歯面温度の測定について : 第1報, 機準研削歯車の場合

概要

論文の詳細を見る
As a basic experiment on gear scoring, the surface temperatures of gear teeth are measured. So far, we can find the experiment for measuring the mean surface temperatures of gear teeth. But it is significant in considering a countermeasure of scoring that from another point of view that we come to know the change of the instantaneous temperature with the change of the meshing position. At our experiment the thermocouple used in our experiment consisted of a constantan pinion and a steel wheel, and the thermoelectricity produced in it was observed by oscilloscope. As a result we reached the following conclusion : (1) On the relation between the meshing position and the surface temperature of gear teeth, the experimental value is nearly equal to the value calculated theoretically. (2) As the surface temperature of gear teeth is largely influenced by the load distribution, it is most desirable for designing the gear that we try to change the profile of gear teeth of lowering the surface temperature most, and to avoid the local contact of gears. (3) The surface temperature of gear teeth rises in proportion to the circumferential speed of gears in the range of lower speed, but in the range of higher speed its change becomes small. Speaking of the influence of loads, the temperature changes in proportion to 1/2 the power of the load, but in the range of higher speed the change becomes small.
一般社団法人日本機械学会の論文
1963-09-25