Model Parameter Estimation with Multi-reference Curve Fitting : Vibration, Control Engineering, Engineering for Industry
スポンサーリンク
概要
- 論文の詳細を見る
Many kinds of curve fit techniques have been developed for the estimation of the modal parameters of a mechanical structure, using the theory of modal analysis. As one of the most popular curve fit techniques which correspond to the multiple input vibration test, Vold's method in the time domain (Poly-reference) is well-known and used extensively. In this paper, a new method which results from improving Vold's method in the time domain is proposed to obtain global modal parameters. In Vold's method, residues are determined by using every column of the transfer function matrix. Then, any two columns of residue matrix contradict each other. In the proposed method, the residues are obtained at the same time by using all of the transfer function matrix. And such contradiction can be solved. With this method, modal parameters of the fly wheel of an automobile are identified. Comparing this new method with former methods, the validity of the new method is confirmed.
- 一般社団法人日本機械学会の論文
著者
-
Nagamatsu A
Tokyo Inst. Technology Tokyo Jpn
-
Nagamatsu Akio
Faculty Of Engineering Tokyo Institute Of Technology
-
Nagamasu Akio
Tokyo Institute Of Technology
-
Nagamatsu Akio
Faculty O F Engineering Tokyo Institute Of Technology
-
YOSHIMURA Takuya
Faculty of Engineering, Tokyo Institute of Technology
-
Yoshimura T
Tokyo Metropolitan Univ. Tokyo Jpn
-
Yoshimura Takuya
Faculty Of Engineering Tokyo Institute Of Technology
関連論文
- Research on Simulation of the Robot : 2nd Report, Numerical Analysis of Force
- Research on Simulation of the Robot : 1st Report, Numerical Analysis of Displacement, Velocity and Acceleration
- Analysis of Vibration by Substructure Synthesis Method : Part 3, Application to Diesel Generator Package
- Analysis of Forced Vibration by Reduced Impedance Method : Part. 4 Proposition and application of multiple reduced impedance method
- Vibration Analysis on Bladed Disk Assemblies of Axial-flow Turbines
- Model Parameter Estimation with Multi-reference Curve Fitting : Vibration, Control Engineering, Engineering for Industry
- Method of Estimating Equivalent Mass of Multi-Degree-of-Freedom System
- Vibration Control of Structures by Dynamic Absorbers (2nd Report, Experimental Approach) : Series C : Vibration, Control Engineering, Engineering for Industry
- Vibration Control of Structures by Dynamic Absorbers (1st Report, Theoretical Approach) : Series C : Vibration, Control Engineering, Engineering for Industry
- Comparison of Component Mode Synthesis Method with MSC-NASTRAN
- Research on Modal Analysis : 4th Report, Multi Reference Curve Fitting-(Part 1)
- Analysis of Vibration by Substructure Synthesis Method : Part.1 Basic Approach
- Basic Research on Vibration and Noise of Internal Combustion Engine : 2nd Report, Noise Analysis of Cylinder Block
- Research on Modal Analysis : 1st report, General Purpose Program of Curve Fitting and Basic Study
- Basic Research on the Vibration and Noise of an Internal Combustion Engine : 3rd Report, Acoustic Analysis of the Cylinder-crank System
- Vibration Analysis of Movable Part of Internal Combustion Engine : Part 1. Crank Shaft
- Basic Research on Vibration and Noise of Internal Combustion Engine : 1st Report, Vibration Analysis of the Piston-Crank System I
- Vibration Analysis by Substructure Synthesis Method : 5th Report, Method with identified Characteristic Matrices
- Analysis of Forced Vibration with Reduced Impedance Method : Part l, Introduction of Analytical Procedure
- Vibration Analysis by Component Mode Synthesis Method (Comparison of Three Methods (1)
- Analysis of Forced Vibration by Reduced Impedance Method : Part. 3 Damped Vibration
- Estimation of Variance of the Frequency Response Function and its Application to the Curve Fit
- Research on Simulation of the Robot : 3rd Report, Vibration Analysis, Part 1
- Analysis of Forced Vibration by Reduced Impedance Method : Part 2. Introduction of New Curve Fitting Technique
- Estimation of Variance of the Frequency Response Function in Experimental Modal Analysis
- Recent Advances of Modal Analysis in Japan
- Vibration Analysis by Multiple Component Mode Synthesis Method
- Analysis of Vibration by Component Mode Synthesis Method : Part 4, Natural Frequency and Natural Mode (II)
- Vibration Analysis by Substructure Synthesis Method : Part 4, Calculation of Residual Compliance Matrix
- Analysis of Vibration by Component Mode Synthesis Method : Part 5, Force Vibration II