遮熱コーティングと基材とのはく離発生強度に及ぼす熱時効の影響(<特集>破壊力学)

概要

論文の詳細を見る
In this study, a delamination initiation strength evaluation method of thermal barrier coating(TBC) using in a hith-temperature component in a land based gas turbine was proposed, and the effect of the thermal aging on the TBC delamination initiation strength was investigated. As obtained results, (1)the delamination tests based on a four point bending were carried out by using a small specimen with a notch in TBC layer. It was found that the delamination occured at a top coating layer beside the interface between the top coating and the bond coating layer. (2)the delamination initiation strength (decohesion), which was obtained from an average of a stress concentration along the interface around the notch root, was about 120MPa. By subjecting the specimen to the thermal aging for more than about 1000hour, the delamination strength was reduced by about 20MPa. (3)In a cross section of a long term thermal-aged specimen, the thermally growth oxide(TGO)pahse, α-Al_3O_3, was observed at the interface between the top coating and the bond coating by EDX analysis. It was found that the delamination initiation strength was inversely proportional to the TGO layer thickness.
社団法人日本材料学会の論文
2000-08-15