同体摩擦法による超微粉体の生成に及ぼす操作条件の影響

概要

論文の詳細を見る
An experimental study on the effects of operational conditions on the formation of ultra fine powders was carried out by a reciprocating friction mill with marble as the specimen. The effects of the working speed, the working pressure and the contact area on the production rate of powder were investigated and the following results were obtained. (1) The effects of the working speed and the working pressure were not significant for the particle size of the powders produced by this mutual friction and abrasion method. The mean particle size was almost constant around the size of 0.2〜0.3μ. (2) The production rate of powder was greater when the contact area of specimens was smaller. (3) It seems that the mechanism of abrasion of marble has analogy with the wearing mechanism of metals in consideration of the relation between the mass of produced powder and the working speed. The details have to be experimentally studied from the mechanochemical point of vies. (4) The mass of the produced powder varied with the working speed and the working pressure when the contact area was constant, and the maximum mass was obtained at the speed of about 6 cm/sec and the pressure of 1.5 Kg/cm^2 in this experiment. (5) Between the production rate of powder Q and the working pressure P, the relation of Q=cP^n was obtained. From the correlation of the index n and the working speed, it seems possible to conjecture the dependence of abrasion mechanisms on the working speed.
社団法人日本材料学会の論文
1973-07-15

同体摩擦法による超微粉体の生成に及ぼす操作条件の影響

スポンサーリンク

概要

著者

関連論文

スポンサーリンク