Hastelloy Xのクリープ特性とその設計への適用 : (<小特集>高温強度小特集)

概要

論文の詳細を見る
Creep and stress rupture tests on three heats of Hastelloy X differing in the manufacturing process were carried out at 800℃, 900℃ and 1000℃. Interpretation of the observed creep properties was made, and a method for predicting necessary design data from the experimentally obtained results was discussed. The results are as follows. (1) It was difficult to separate the primary, secondary and tertiary creep stage in the creep curve of Hastelloy X of the present tests. However, those were made distinguishable by plotting the results in a double-logarithmic coordinates. From these creep rate curves, the primary and secondary creep rates and the times to the initiation of secondary and tertiary creeps were derived. (2) It is considered that the same stress and temperature dependences between the primary and secondary creep rates exist in the creep behaviour of Hastelloy X of the present tests. (3) All the creep data, except the isochronous stress-strain curve, required for the design such as stress vs. rupture time, stress vs. secondary creep rate and stress vs, time to initiation of tertiary creep could be arranged through the Larson-Miller parameter. On the other hand, the isochronous stress-strain curve was figured out by estimating creep curves. The constitutive equations of creep for a heat of Hastelloy X proposed in this paper and the isochronous stress-strain curves derived from these constitutive equations were consistent with the experimental data obtained for the corresponding material.
社団法人日本材料学会の論文
1977-03-15

Hastelloy Xのクリープ特性とその設計への適用 : (<小特集>高温強度小特集)

スポンサーリンク

概要

著者

関連論文

スポンサーリンク