無潤滑滑り接触におけるジルコニアの摩擦摩耗機構

概要

論文の詳細を見る
The friction and wear properties of self-mated zirconia (ZrO_2) in unlubricated sliding contact were investigated by using a pin/disk friction machine. From the obtatined results and the morphologies of frictional surfaces observed by SEM and particle size distribution of wear particles, the friction and wear mechanism of ZrO_2 pin slide against ZrO_2 disk was discussed. In this system, the average friction coefficient was almost independent of the load applied, but the wear amount increased with an increase of the load. The wear particle sizes became larger with increasing sliding time and load applied. It is found that the friction and wear mechanism of ZrO_2 is dominated with the formation, delamination and fracture of surface film transferred on frictional surfaces by friction and adhesion, and that they are influenced by friction heat and the load applied.
社団法人日本セラミックス協会の論文
1996-07-01