Recycling Effects of Residual Slag after Magnetic Separation for Phosphorus Recovery from Hot Metal Dephosphorization Slag
スポンサーリンク
概要
- 論文の詳細を見る
In a previous study, the authors found that phosphorus exhibits remarkable segregations in industrial hot metal pretreatment slag where it exists as a Ca3P2O8–Ca2SiO4 solid solution together with a FeO–CaO–SiO2–MnO–MgO matrix. Since the magnetic property of each phase is significantly different, it is possible to separate the phases with the aid of a superconducting strong magnetic field. By applying a strong magnetic field of 0.5 to 2.5 T to the crushed slag, more than 60% of the concentrated phosphorus phase in the slag was recovered. If most of the phosphorus can be removed from the slag, the residual slag will comprise FeO–CaO–SiO2–MnO–MgO with less P2O5, and thus may be recycled to iron- and steel-making processes, such as sintering, hot-metal desiliconization, and hot-metal dephosphorization processes. In the present work, the recycling effect of subjecting the residual slag to the dephosphorization process was simulated based on a mass balance calculation. A significant reduction in total slag generation and CaO input was demonstrated by the mathematical model considering phosphorus recovery and recycling of residual slag as a dephosphorization agent. Using the waste input–output model, it was shown that phosphorus recovery from dephosphorization slag and the recycling of residual slag in a hot-metal dephosphorization process have potentially great environmental and economic benefits.
- 社団法人 日本鉄鋼協会の論文
- 2010-01-15
著者
-
Kubo Hironari
Graduate School Of Environmental Studies Tohoku University
-
Matsubae Yokoyama
Graduate School Of Environmental Studies Tohoku University
-
Nagasaka Tetsuya
Graduate School Of Environmental Studies Tohoku University
-
Nagasaka Tetsuya
Graduate School Of Engineering Tohoku University
-
NAGASAKA Tetsuya
Graduate School of Engineering, Tohoku University
関連論文
- Phase Equilibria of Two-liquid CaO-MgO-Fe_tO-P_2O_5 Slag Saturated with (Mg, Fe)O
- Equilibrium Relation of Two Liquid CaO-MgO-Fe_tO-P_2O_5 Slag Phases Saturated with (Mg,Fe)O
- Phase Equilibria between SiO_2 and Iron-Chromite Spinel Structure Solid Solution, and Deoxidation of Liquid Fe-Cr Alloy with Silicon
- Thermodynamics of Oxygen in liquid Fe-Cr Alloy Saturated with FeO・Cr_2O_3 Solid Solution
- Dissolution behavior of environmentally regulated elements from steelmaking slag into seawater
- Dissolution behavior of nutrition elements from steelmaking slag into seawater
- Substance Flow Analysis of Manganese Associated with Iron and Steel Flow in Japan
- Substance Flow Analysis of Indium for Flat Panel Displays in Japan
- Material Flow Analysis of Aluminum Dross and Environmental Assessment for Its Recycling Process
- Substance Flow Analysis of Molybdenum Associated with Iron and Steel Flow in Japanese Economy
- Evaluation Method of Metal Resource Recyclability Based on Thermodynamic Analysis
- Equilibrium between Titanium and Oxygen in Liquid Fe-Ti Alloy Coexisted with Titanium Oxides at 1873K
- Surface Roughness of Solidified Mold Flux in Continuous Casting Process
- Substance Flow Analysis of Zinc Associated with Iron and Steel Cycle in Japan, and Environmental Assessment of EAF Dust Recycling Process
- New EAF Dust Treatment Process with the Aid of Strong Magnetic Field
- Impact of the Recovery of Secondary Ferrous Materials from Alternative ELV Treatment Methods on CO_2 Emission : A Waste Input Output Analysis
- Separation and Recovery of Phosphorus from Steelmaking Slags with the Aid of a Strong Magnetic Field
- Recycling Effects of Residual Slag after Magnetic Separation for Phosphorus Recovery from Hot Metal Dephosphorization Slag
- Magnetic Separation of Phosphorus Enriched Phase from Multiphase Dephosphorization Slag
- Waste Input-Output Analysis on "Landfill Mining Activity"
- Effect of Oxygen on the Evaporation Rate of Lead from Liquid Popper under Reduced Pressure
- New Activity Measurement Technique by Vacuum-Sealed Quartz Cell/Atomic Absorption Spectrophotometer Combination and Its Application to Liquid Bi-In Binary System
- Carbonization Behaviour of Woody Biomass and Resulting Metallurgical Coke Properties
- Desulfurization Technology in the Blast Furnace Raceway by MgO-SiO_2 Flux Injection
- Micro-structure Refinement in Low Carbon High Manganese Steels through Ti-Deoxidation, Characterization and Effect of Secondary Deoxidation Particles
- Identifying the Substance Flow of Metals Embedded in Japanese International Trade by Use of Waste Input-Output Material Flow Analysis (WIO-MFA) Model