Desulfurization Technology in the Blast Furnace Raceway by MgO-SiO_2 Flux Injection
スポンサーリンク
概要
- 論文の詳細を見る
This paper presents a study on desulfurization technology in the steel industry, with attention focused on the removal of sulfur that forms acid rain, which has been creating various global problems. The study was confined to the technology that injects a mixture of serpentine and pulverized coals. Thermodynamically, a magnesium gas producing reaction occurs when magnesium oxide is turned into a hot strongly reducing atmosphere and the resulting magnesium gas forms magnesium sulfide by reaction with the sulfur in the molten iron. By dividing this desulfurization process into a magnesium gas producing reaction and a desulfurization reaction by the magnesium gas, the desulfurization effect of the magnesium oxide flux was confirmed through laboratory experiment. A thermodynamic study on the desulfurization reaction in which SiO gas resulting from the reduction of SiO2 produces a silicon sulfide gas by reaction with the sulfur in the molten iron revealed that the possibility of desulfurization of the molten iron by the silicon sulfide gas is not negligible.
- 社団法人 日本鉄鋼協会の論文
- 2008-02-15
著者
-
Nagasaka Tetsuya
Graduate School Of Engineering Tohoku University
-
ICHIDA Morimasa
Environment & Process Technology Center
-
ORIMOTO Takashi
Hokkai Iron & Coke Corporation
-
NODA Toshinosuke
Graduate School of Engineering, Tohoku University
-
Noda Toshinosuke
Graduate School Of Engineering Tohoku University
関連論文
- Phase Equilibria of Two-liquid CaO-MgO-Fe_tO-P_2O_5 Slag Saturated with (Mg, Fe)O
- Equilibrium Relation of Two Liquid CaO-MgO-Fe_tO-P_2O_5 Slag Phases Saturated with (Mg,Fe)O
- Phase Equilibria between SiO_2 and Iron-Chromite Spinel Structure Solid Solution, and Deoxidation of Liquid Fe-Cr Alloy with Silicon
- Thermodynamics of Oxygen in liquid Fe-Cr Alloy Saturated with FeO・Cr_2O_3 Solid Solution
- Dissolution behavior of environmentally regulated elements from steelmaking slag into seawater
- Dissolution behavior of nutrition elements from steelmaking slag into seawater
- Substance Flow Analysis of Manganese Associated with Iron and Steel Flow in Japan
- Substance Flow Analysis of Indium for Flat Panel Displays in Japan
- Material Flow Analysis of Aluminum Dross and Environmental Assessment for Its Recycling Process
- Substance Flow Analysis of Molybdenum Associated with Iron and Steel Flow in Japanese Economy
- Evaluation Method of Metal Resource Recyclability Based on Thermodynamic Analysis
- Equilibrium between Titanium and Oxygen in Liquid Fe-Ti Alloy Coexisted with Titanium Oxides at 1873K
- Surface Roughness of Solidified Mold Flux in Continuous Casting Process
- Substance Flow Analysis of Zinc Associated with Iron and Steel Cycle in Japan, and Environmental Assessment of EAF Dust Recycling Process
- New EAF Dust Treatment Process with the Aid of Strong Magnetic Field
- Impact of the Recovery of Secondary Ferrous Materials from Alternative ELV Treatment Methods on CO_2 Emission : A Waste Input Output Analysis
- Separation and Recovery of Phosphorus from Steelmaking Slags with the Aid of a Strong Magnetic Field
- Activation of Deadman State in Blast Furnace Using Deadman Blowing Method
- Recycling Effects of Residual Slag after Magnetic Separation for Phosphorus Recovery from Hot Metal Dephosphorization Slag
- Magnetic Separation of Phosphorus Enriched Phase from Multiphase Dephosphorization Slag
- Waste Input-Output Analysis on "Landfill Mining Activity"
- Effect of Oxygen on the Evaporation Rate of Lead from Liquid Popper under Reduced Pressure
- New Activity Measurement Technique by Vacuum-Sealed Quartz Cell/Atomic Absorption Spectrophotometer Combination and Its Application to Liquid Bi-In Binary System
- Carbonization Behaviour of Woody Biomass and Resulting Metallurgical Coke Properties
- Desulfurization Technology in the Blast Furnace Raceway by MgO-SiO_2 Flux Injection
- Control of CO_2 Peak Position by Dual Lance Air Curtain Method
- Activation of Deadman State in the Blast Furnace Using Serpentine Injection through Tuyere
- Micro-structure Refinement in Low Carbon High Manganese Steels through Ti-Deoxidation, Characterization and Effect of Secondary Deoxidation Particles
- Identifying the Substance Flow of Metals Embedded in Japanese International Trade by Use of Waste Input-Output Material Flow Analysis (WIO-MFA) Model