Influence of the Crack Spacing in the Coating Layer on the Progress of Interfacial Debonding in Galvannealed Steel Pulled in Tension

概要

論文の詳細を見る
The coefficient of thermal expansion of the coating layer of the hot-dipped galvannealed steels is higher than that of the substrate steel. Accordingly, the coating layer shows multiple cracking during cooling due to the thermally induced stress. When tensile stress is applied externally on the coated steels, the coating layer exhibits further multiple cracking perpendicular to the tensile direction. As a result, the coating layer is multiply-cracked both in tensile and sample width directions. Under such existent cracks, the coating layer is spalled due to the interfacial debonding induced by the buckling of the coating layer in the sample width direction. In the present work, the influences of the crack spacing in the tensile direction and that in the sample width direction on the spalling process of the coating layer were studied with the finite element stress analysis. The results of analysis showed that (a) the larger the crack spacing of the coating layer in the tensile direction, the more occurs the interfacial debonding and (b) the crack spacing in the tensile direction affects especially on the initial spalling behavior; the larger the spacing, the more the spalling is enhanced. On the other hand, the crack spacing in the sample width direction affects only slightly on the initial spalling behavior, while the larger the spacing, the larger becomes the debonding area in the later stage.
社団法人日本鉄鋼協会の論文
2009-03-15