Manganese Furnace Dust : Drying and Reduction of Zinc Oxide by Tar
スポンサーリンク
概要
- 論文の詳細を見る
Manganese furnace dust collected in smelting of manganese alloys is in the form of a slurry containing oxides of manganese, iron, zinc and other metals, and tar. Drying of manganese furnace dust and removing zinc from the dust are essential steps to recycle the dust to the smelting furnaces. This paper presents results of drying tests of manganese dust under different conditions and zinc removal from dried dust in sintering experiments. On the basis of drying tests, an empirical relationship correlating the moisture content and drying time with temperature and sample thickness was derived. The effects of sintering time, temperature, moisture content and thickness of a sample on zinc removal in sintering experiments have been established.
- 社団法人 日本鉄鋼協会の論文
- 2008-07-15
著者
-
Ostrovski Oleg
School Of Chemical Sciences And Engineering The University Of New South Wales
-
Hamano Tasuku
School Of Materials Science And Engineering University Of New South Wales
-
Brown Peter
Tasmanian Electro Metallurgical Company Pty Ltd.
-
Ostrovski Oleg
School Of Materials Sci. And Engineering Univ. Of New South Wales
-
ZHANG Guangqing
School of Materials Science and Engineering, the University of New South Wales
-
Zhang Guangqing
School Of Materials Sci. And Engineering The Univ. Of New South Wales
-
BROWN Peter
Tasmanian Electro Metallurgical Co. Pty Ltd.
関連論文
- Reduction of the Mixture of Titanomagnetite Ironsand and Hematite Iron Ore Fines by Carbon Monoxide
- Effects of Additives and Temperature on the Dissolution Rate and Diffusivity of MgO in CaO-Al_2O_3 Slags under Forced Convection
- Molecular Dynamics Simulation of Dilute Solutions of MeO and MeF_2 in the CaO-CaF_2 System
- Reduction of Manganese Ores by Methane-containing Gas
- Reduction of Titania-Ferrous Ore by Carbon Monoxide
- Effects of Preoxidation of Titania-Ferrous Ore on the Ore Structure and Reduction Behavior
- Reduction of Manganese Oxides by Methane-containing Gas
- Carbothermal Solid State Reduction of Manganese Ores : 3. Phase Development
- Carbothermal Solid State Reduction of Manganese Ores : 2. Non-isothermal and Isothermal Reduction in Different Gas Atmospheres
- Carbothermal Solid State Reduction of Manganese Ores : 1. Manganese Ore Characterisation
- Removal of Antimony from Liquid Copper by Using CuCl-Na_2CO_3 Fluxes at 1423K
- Mechanisms of Oxidation and Vaporization of Antimony from Liquid Copper with CuCl-CaO Fluxes
- Chlorination Kinetics of ZnFe_2O_4 with Ar-Cl_2-O_2 Gas
- Removal of Zn and Pb from Fe_2O_3-ZnFe_2O_4-ZnO-PbO Mixture by Selective Chlorination and Evaporation Reactions
- Reduction of Titania-Ferrous Ore by Hydrogen
- Formation of Cementite from Titanomagnetite Ore
- Phase Development in Carbothermal Reduction of Ilmenite Concentrates and Synthetic Rutile
- Formation Reaction of Phosphate Compound in Multi Phase Flux at 1573K
- Partition Equilibria of Lead and Antimony between Liquid Copper and MgO Saturated Cu_2O-SiO_2, Cu_2O-CaO and Cu_2O-CaO-SiO_2 Systems
- Reaction Mechanism between Solid CaO and FeO_x-CaO-SiO_2-P_2O_5 Slag at 1 573K
- Dissolution of Dense Lime in Molten Slags under Static Conditions
- Partition Equilibria of Lead and Antimony between Liquid Copper and MgO Saturated Cu2O-SiO2, Cu2O-CaO and Cu2O-CaO-SiO2 Systems
- Manganese Furnace Dust : Drying and Reduction of Zinc Oxide by Tar
- Sintering Pot Test of Manganese Ore with Addition of Manganese Furnace Dust
- Reduction of Zinc Oxide in Manganese Furnace Dust with Tar
- Wettability and Reduction of MnO is Slag by Carbonaceous Materials
- Wetting of Solid Iron, Nickel and Platinum by Liquid MnO-SiO_2 and CaO-Al_2O_3-SiO_2
- Low-temperature Synthesis of Aluminium Carbide
- Characterisation of Manganese Furnace Dust and Zinc Balance in Production of Manganese Alloys
- Carbothermal Reduction and Nitridation of Ilmenite Concentrates