Plasma Behavior under Imposition of Alternating Magnetic Field Perpendicular or Parallel to the Plasma Arc Current
スポンサーリンク
概要
- 論文の詳細を見る
Thermal plasma has advantages such as clean energy, good controllability, high power density and so on. Therefore, it has been applied to the steel industry such as heat source of molten steel in a tundish and secondary refining. For these processes, precise control of the plasma is requested for high efficiency and for high-quality products. Because the plasma is electrically conductive fluid, a magnetic field is one of the powerful tools to control its behavior under non-contact operation. Therefore, investigations to control the plasma using the magnetic field have been done. In this investigation, a DC transferred plasma arc behavior has been investigated under imposition of an alternating magnetic field of frequency range between 5 Hz and 2 000 Hz in which the magnetic field direction is perpendicular or parallel to the plasma arc current. The forces governing the plasma behavior is estimated by the simple calculation of forces acting the plasma. Under the imposition of the perpendicular magnetic field to the plasma arc current, a plasma oscillation width is constant when the magnetic field frequency is less than 50 Hz, while it decreases with increase in the magnetic field frequency if the frequency is larger than the 50 Hz. Under the imposition of the parallel magnetic field of 1 000 Hz to the plasma arc current, a burned area on a copper block by the plasma is smaller than that without the magnetic field while the burned area with the low frequency magnetic field less than 1 000 Hz is larger than that without the magnetic field.
- 社団法人 日本鉄鋼協会の論文
- 2007-07-15
著者
-
Asai Shigeo
Department Of Materials Processing Engineering Nagoya University
-
Asai Shigeo
Department Of Chemistry And Materials Science Tokyo Institute Of Technology
-
IWAI Kazuhiko
Department of Materials Processing Engineering, Nagoya University
-
Iwai Kazuhiko
Department Of Materials Physics And Energy Engineering Graduate School Of Engineering Nagoya Univers
-
YAMAMOTO Yosuke
Nagoya University
-
Asai Shigeo
Department Of Materials Physics And Energy Engineering Graduate School Of Engineering Nagoya Univers
関連論文
- カ-ボンブラック充填ゴムの電気的性質--温度及び粒子表面処理の効果〔英文〕
- Synthesis and Properties of Polysiloxanes Possessing 9,9-Diarylfluorene Structure in the Main Chain
- Structure Control of an Aluminum Alloy Using an Alternating Current Imposition during Its Pouring
- Percolation Concept: Polymer-Filler Gel Formation, Electrical Conductivity and Dynamic Electrical Properties of Carbon-Black-Filled Rubbers
- Characteristics of Liquid Metal Motion Driven by Quasi-sinusoidal Magnetic Fields
- The Crystal Orientation Taking Account of Gravity Force under High Magnetic Field
- Alignment of Titania Whisker by Colloidal Filtration in a High Magnetic Field : Instrumentation, Measurement, and Fabrication Technology
- Difference in Bioactivity, Initial Cell Attachment and Cell Morphology Observed on the Surface of Hydroxyapatite Ceramics with Controlled Orientation
- Analysis of Uniaxial Alignment Behavior of Nonmagnetic Materials under Static Magnetic Field with Sample Rotation
- Formation and biological affinity evaluation of crystallographically aligned hydroxyapatite( Ceramics for Biomedical Applications in Asian Countries)
- Copper Distribution in Fe–Cu and Fe–C–Cu Alloys under Imposition of an Intense Magnetic Field
- In-Situ Observation of Crystal Alignment under a Magnetic Field Using X-ray Diffraction
- Characterization of Surface Biocompatibility of Crystallographically Aligned Hydroxyapatite Fabricated Using Magnetic Field
- Crystal Alignment of Sn-Pb Alloy by Controlled Imposition of a Static Magnetic Field and an Alternating Electric Current during Solidification
- Orientation of Hydroxyapatite C-Axis under High Magnetic Field with Mold Rotation and Subsequent Sintering Process
- Formation of c-axis Aligned Polycrystal Hydroxyapatite Using High Magnetic Field with Mechanical Sample Rotation
- Strengthening of Carbon Fibers by Imposition of a High Magnetic Field in a Carbonization Process
- Fabrication of the Crystal-Oriented Thermoelectric Material Bi_2Te_3 by Slip Casting under a High Magnetic Field
- (2) Prospect of Materials Processing Using Electromagnetic or Magnetization Force (Miscellany)
- Confining of Molten Metal by Imposition of D.C. Magnetic Field and D.C. Electric Current
- Plasma Behavior under Imposition of Alternating Magnetic Field Perpendicular or Parallel to the Plasma Arc Current
- Visualization of Collision Behavior of Particles Simulating Inclusions in a Turbulent Molten Steel Flow and Its Theoretical Analysis
- Relationship between a Standing-Wave Field and a Sonoluminescing Field
- Solidified Structure of S45C Steel with and without the Imposition of Electromagnetic Field
- Recent Progress of EPM in Steelmaking, Casting, and Solidification Processing
- Solidified Structure of Al Alloys by a Local Imposition of an Electromagnetic Oscillationg Force
- 延伸ポリフェニレンスルフィドの構造と力学的性質〔英文〕
- Copper Distribution in Fe-Cu and Fe-C-Cu Alloys under Imposition of an Intense Magnetic Field
- Quantification of Isothermal Phase Transformation in Solid Metals Based on Measurement of Magnetic Susceptibility
- Semi-continuous Magnetic Removal of Phosphate Using an Iron Oxide Hydroxide Adsorbent and Regeneration of Its Adsorbent
- Control of Crystal Orientation of Hydroxyapatite by Impostition of a High Magnetic Field
- Effect of Temperature Ranges of Alternating Current Imposition on Modification of Primary Mg_2Si Crystals in Hypereutectic Mg-Si Alloy
- Modification of Primary Mg_2Si Crystals in Hypereutectic Mg-Si Alloy by Application Alternating Current
- Effects of Operating Parameters on Modification of Primary Mg_2Si Crystals in Hypereutectic Mg-Si Alloy Treated by Imposition of Alternating Current
- Effect of Process Parameters on Ultrasonic Separation of Dispersed Particles in Liquid
- Crystal Alignment of Sn-Pb Alloy by a Simultaneous Imposition of a DC Current and a Static Magnetic Field during Solidification
- Optimization of Alternating Current Imposing Period on Crystal Alignment of Sn-Pb Alloy Subjected to a Static Magnetic Field during Solidification
- Evaluation of Selective Separation of Phosphorous Components from Plating Baths Using Schwertmannite
- Structure of S45C Steel Solidified under the Simultaneous Imposition of a Static Magnetic Field and a Direct Current
- Crystal Alignment of Bi-Sn Alloy by Simultaneous Imposition of a Static Magnetic Field and an Alternating Current during Solidification
- Mechanism of Wave Excitation on a Liquid Metal Surface Submerged in an Intermittent Alternating Magnetic Field
- Preparation of Bulky Bi(Pb)-Sr-Ca-Cu-O Superconductor by Magnetized Twin-Roll
- Control of Precipitating Phase Alignment and Crystal Orientation by Imposition of a High Magnetic Field
- Free Surface Behavior of a Liquid Metal under the Imposition of a High Frequency Magnetic Field
- Generation of Compression Waves by Simultaneously Imposing a Static Magnetic Field and an Alternating Current and Its Use for Refinement of Solidified Structure
- Orientation of Fibers in Liquid by Ultrasonic Standing Waves
- Non-contact Generation of Compression Waves in a Liquid Metal by Imposing a High Frequency Electromagnetic Field
- Effect of the Crystalline Morphology on Microcellular Foaming of Poly(L-lactide) with High-pressure Carbon Dioxide
- Positive Temperature Coefficient Effect of Epoxy Resin Filled with Short Carbon Fibers
- Crystal Alignment of Titanium under Simultaneous Imposition of Electric Current and Magnetic Field
- Transparency and Mechanical Properties of PLLA Films Treated with CO_2
- Thermal Behavior of Rigid Amorphous Phase in Poly(ethylene naphthalene-2,6-dicarboxylate) Film
- Effect of Operating Parameters of an Electromagnetic Refining Process on the Solidified Structure
- Alignment Behavior of Crystal with Magnetic Anisotropy of $\chi_{c} < \chi_{a}$ under Rotating Magnetic Field