Influence of Slag Composition on Slag-Iron Interfacial Tension

概要

論文の詳細を見る
Interfacial tensions between liquid iron and slag were examined for CaO–SiO2 binary and CaO–SiO2–Al2O3 ternary slag systems. The influences of FeO, MgO, B2O3, TiO2, BaO and ZrO2 in slag on the interfacial tension were also investigated by varying these oxides from 1–30 wt% in the CaO–SiO2 binary or CaO–SiO2–Al2O3 ternary slag systems.The interfacial tensions were determined by the sessile drop technique under argon atmosphere at 1 853 K. An X-Ray radiographic technique was employed to image the profile of molten iron drop in a slag bath and the interfacial tensions between slag and iron were obtained from the drop shape analysis.In examining the effect of slag composition on the interfacial tension, the oxygen in liquid iron and its impact on the interfacial tension was taken into consideration. The interfacial tension was found slightly increased with increasing CaO/SiO2 ratio in CaO–SiO2 slag, and with increasing MgO content in the slag. A decrease of interfacial tension was found with increasing FeO in slag. Only minor changes in the interfacial tension were observed with varying the slag composition in the CaO–SiO2–Al2O3 ternary slag system and the influences of B2O3, TiO2, BaO, and ZrO2 in slag on the interfacial tension were found insignificant.
社団法人日本鉄鋼協会の論文
2006-03-15