Structure Analysis of Coke, Wood Charcoal and Bamboo Charcoal by Raman Spectroscopy and Their Reaction Rate with CO_2
スポンサーリンク
概要
- 論文の詳細を見る
In order to discuss the reactivity of carbonaceous materials with CO2, the Raman spectroscopy analysis was carried out. Nine kinds of materials were examined. The Raman spectra of ordered materials could be assigned to the graphite structure and its defect, but those of disordered materials could not. New parameters were derived to evaluate the structure of the latter. Using the parameters, the structure change was followed during high temperature heat treatment. The disordered material consists of random structure, graphite structure and its defects. The random structure changes to the graphite structure with many defects and the defects decrease with the heat treatment temperature. The reaction rate constant is evaluated. It increases when the structure changes from the random structure to the graphite structure with many defects. After the change, it decreases with decreasing the defects in graphite structure. Thus, the most reactive material should consist of the graphite structure with many defects.
- 社団法人 日本鉄鋼協会の論文
- 2005-07-15
著者
-
Yokoyama Seiji
Toyohashi University Of Technology
-
竹中 俊英
Department Of Production Systems Engineering Toyohashi University Of Technology
-
Taki Tomihiro
Ningyo-toge Works Power Reactor And Nuclear Fuel Development Corporation
-
KAWAKAMI Masahiro
Toyohashi University of Technology
-
KARATO Takahiro
Graduate Course Toyohashi University of Technology
-
TAKENAKA Toshihide
Toyohashi University of Technology
-
Kawakami M
Department Of Production Systems Engineering Toyohashi University Of Technology
-
Yokoyama Seiji
Department Of Production Systems Engineering Toyohashi University Of Technology
関連論文
- コークス、木炭、グラファイトのガス化反応性と気孔構造
- 溶鋼表面への鉄鉱石粉末吹きつけによる同時脱炭・脱窒反応のメカニズム(革新的高効率混合・分離リアクターの開発)
- グラファイト及び備長炭のガス化反応速度におけるガス種及び粒径の影響
- 木炭, コークス, グラファイトと純CO_2との反応性評価
- コークスの CO_2 との反応性と反応後強度の評価(コークス)(製銑プロセスの機能強化と新展開)
- コークスのCO_2との反応性と反応後強度の評価
- コークスの反応後強度の物理的評価法
- Chloride Pyrometallurgy of Uranium Ore, (II) Selective Extraction of Uranium Using the Mixed Gas of Chlorine and Oxygen in the Presence of Activated Carbon
- Chloride Pyrometallurgy of Uranium Ore, (I) Chlorination of Phosphate Ore Using Solid or Gas Chlorinating Agent and Carbon
- チタン、チタン合金の直接電解製造--液体金属の電析は可能か?
- 弱酸化性ガス吹き込みによる溶鉄の脱珪と脱炭(製鋼)
- 溶融塩化物での不均化反応を用いたチタン合金コーティング
- 溶融塩中でのLaを含むMg金属の直接電析とその耐食性
- 炭材反応の高速化-炭材のガス化反応性と構造
- 溶鋼中へのH_2吹込みによる各種製綱反応の可能性(革新的高効率混合・分離リアクターの開発)
- コークスおよび各種炭材のCO2によるガス化反応速度
- チタン溶融塩電解採取法への新しい試み
- 直流ESR法における電解効果
- ESR装置を用いたTi溶融塩電解採取の基礎的研究
- 非水溶媒を用いた鋼中CaO介在物抽出分離の試み
- SPEED法により突出させたステンレス鋼中介在物の画像解析
- 超音波振動ノズルによる吹き込み気泡の微細化と気-液間反応の促進
- 高力アルミニウム合金の剥離腐食の定量評価法
- Tiフッ化物を添加したNaF-NaBF_4共晶溶融塩中でのTiB_2電析反応
- 溶融LiCl-KCl中での貴金属の陽極溶解と化学還元
- Structure Analysis of Coke, Wood Charcoal and Bamboo Charcoal by Raman Spectroscopy and Their Reaction Rate with CO_2
- スラグや溶融塩を用いたTi金属の製造・コーティング法
- Micro Pore Structure and Reaction Rate of Coke, Wood Charcoal and Graphite with CO_2
- Electrorefining of Magnesium in Molten Salt and Its Application for Recycling
- Dissolution and Depositoin of Impurities in Mg Electrolysis
- Characterization of Relieved Non-metallic Inclusions in Stainless Steel by Image Processing of Micrographs
- Electroplating of TiB_2 in NaF-NaBF_4 Eutectic Melt with Titanium Fluoride
- Serial Batch Elution of Electric Arc Furnace Oxidizing Slag Discharged from Normal Steelmaking Process into Fresh Water
- Behavior of CO_2 Absorption in Wet-grinding of Electronic Arc Furnace Reducing Slag by Vibration Ball Mill
- Effect of Aluminum and Oxygen Content on Diffusivity of Aluminum in Molten Iron
- Improvement of Corrosion Resistance of Magnesium Alloys by Surface Film with Rare Earth Element
- 炭素鋼の溶融Fe-C合金への溶解時における熱物質移動
- Direct Production of Ti-Fe Alloy in Liquid by Electrowinning in Molten Slag
- An Effective and Economic Strategy to Restore Acidified Freshwater Ecosystems with Steel Industrial Byproducts