Two-phase Separation of Primary MX Carbonitride during Tempering in Creep Resistant 9Cr1MoVNb Steel
スポンサーリンク
概要
- 論文の詳細を見る
Precipitation behaviour during heat treatment has been investigated on 9Cr1MoVNb steel. Coarse primary and fine secondary MX carbonitrides are observed in the as normalized condition. On the other hand, coarse primary MX is not detected after tempering at 1 038 K, and Nb-rich and V-rich fine secondary MX carbonitrides and M23C6 carbide are observed in the as tempered condition. Variations of metallic elements concentrations of Nb-rich MX and V-rich MX in the as tempered condition are within the relatively small ranges. Average diameter of 34 nm for V-rich MX is slightly larger than that of 24 nm for Nb-rich MX in the as tempered condition. Both size and metallic elements concentrations of the fine secondary MX observed in the as normalized condition are almost the same as those of Nb-rich MX observed in the as tempered condition. A composition of metallic elements of the coarse primary MX varies along the line between those of Nb-rich MX and V-rich MX in a Cr-Nb-V ternary phase diagram. It has been considered that, at normalizing temperature of 1 323 K, Nb-rich MX and V-rich MX forms solid solution and composition of the primary MX varies along the tie line between those two phases. Two-phase separation of primary MX into Nb-rich MX and V-rich MX may be caused by the miscibility gap in primary MX and another two phases at the tempering temperature of 1 038 K.
- 社団法人 日本鉄鋼協会の論文
- 2003-07-15
著者
-
KIMURA Kazuhiro
National Institute for Materials Science
-
Toda Yoshiaki
National Institute for Materials Science
-
KUMAI Shinji
Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology
-
Kumai Shinji
Interdisciplinary Graduate School Of Science And Engineering Tokyo Institute Of Technology
-
Suzuki Kenta
Graduate Student Interdisciplinary Graduate School Of Science And Engineering Tokyo Institute Of Tec
-
Toda Yoshiaki
Steel Research Center National Institute For Materials Seienee
-
Kimura Kazuhiro
Materials Data Sheet Station National Institute For Materials Science
-
Kushima Hideaki
Materials Data Sheet Station National Institute For Materials Science
-
Kushima Hideaki
Materials Information Technology Station National Institute For Materials Science
-
SUZUKI Kenta
Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology
-
Kimura Kazuhiro
National Research Institute For Metals
関連論文
- Effects of Full Annealing Heat Treatment on Long-term Creep Strength of 2.25Cr-lMo Steel Welded Joint
- Effects of Ni and Heat Treatment on Long-term Creep Strength of Precipitation Strengthened 15Cr Ferritic Heat Resistant Steels
- Influence of Chemical Composition and Heat Treatment Condition on Impact Toughness of 15Cr Ferritic Creep Resistant Steel
- Improvement in Creep Strength of Precipitation Strengthened 15Cr Ferritic Steel by Controlling Carbon and Nitrogen Contents
- Effects of W and Co on Long-term Creep Strength of Precipitation Strengthened 15Cr Ferritic Heat Resistant Steels
- D311 IMPROVEMENT IN CREEP STRENGTH OF PRECIPITATION STRENGTHENED 15CR FERRITIC STEEL BY CONTROLLING OF CARBON AND NITROGEN CONTENTS
- Development of high strength 15Cr creep resistant steel for low emission power plant
- Effects of W and Co on the Microstructure and Creep Strength of the Precipitation Strengthened 15Cr Ferritic Steels(Special Issue on Creep and Fatigue at Elevated Temperatures)
- SB-08-3(037) Effects of W and Co on the Microstructure and Creep Strength of the Precipitation Strengthened 15Cr Ferritic Steels(Advanced Heat Resistant Steels)
- SB-08-2(034) Development of Precipitation Strengthened 15Cr Ferritic Creep Resistant Steel(Advanced Heat Resistant Steels)
- SB-06-4(038) Changes in Precipitates of Modified 9Cr-1Mo Steel During Long-term Creep Deformation at 873K and 923K(Changes in Microstructure 1)
- Development of High Strengh 15Cr Ferritic Creep Resistant Steel with Addition of Tungsten and Cobalt
- Development of High Strength 15Cr Ferritic Creep Resistant Steel
- Phase Equilibrium between Austenite and MX Carbonitride in a 9Cr-1Mo-V-Nb Steel
- Low Temperature Specific Heat and Electrical Resistivity in Orthorhombic YBa_2Cu_3O_ and Tetragonal YBa_2Cu_3O_
- SB-07-3(083) Effect of Microstructural Changes During Creep on The Creep Rate at 823K in Type 304 Heat Resistant Steel(Changes in Microstructure 2)
- Prediction of Precipitation Sequences within Grains in 18Cr-8Ni Austenitic Steel by Using System Free Energy Method
- Two-phase Separation of Primary MX Carbonitride during Tempering in Creep Resistant 9Cr1MoVNb Steel
- Creep Fracture Mechanism Map and Creep Damage of Cr-Mo-V Turbine Rotor Steel
- Electrophoretic Karyotype and Gene Assignment to Chromosomes of Aspergillus oryzae
- D312 INFLUENCE OF CHEMICAL COMPOSITION AND HEAT TREATMENT CONDITION ON IMPACT TOUGHNESS OF 15CR FERRITIC CREEP RESISTANT STEEL
- TTP Diagrams of Z Phase in 9-12% Cr Heat-Resistant Steels
- Z-phase Formation during Creep and Aging in 9-12%Cr Heat Resistant Steels
- Contribution of Microstructural Factors to Hardness Change during Creep Exposure in Mod.9Cr-1Mo Steel
- Effect of Nitrogen Content on Microstructural Aspects and Creep Behavior in Extremely low Carbon 9Cr Heat-resistant Steel
- PREFACE
- Special Issue on Advanced Light Metals and Processing in Asia 2007
- Elevation Properties of a Quasi-Zenith Satellite System Using Circular Orbits(Recent Fundamental Technologies for Broadband Satellite Communications)
- In-Beam Stress Corrosion Tests for Welded 308 Stainless Steel in Pure Water at 473 K