Formation and Mechanical Strength of New Cu-Based Bulk Glassy Alloys with Large Supercooled Liquid Region
スポンサーリンク
概要
- 論文の詳細を見る
- Japan Institute of Metalsの論文
- 2004-04-20
著者
関連論文
- Friction Stir Welding of Zr_Cu_Ni_5Al_ Bulk Metallic Glass
- High Specific Strength and Improved Ductility of Bulk (Mg_Cu_Gd_)_Ti_x Metallic Glass Composites
- Enhanced Tensile Strength and Plasticity of Zr-Cu-Al Bulk Glassy Alloys at Cryogenic Temperatures
- Enhancement of Corrosion Resistance of Titanium-Copper Based Metallic Glass by Methylsiloxane Coating
- Interface Structure between Ti-Based Bulk Metallic Glasses and Hydroxyapatite Ceramics Jointed by Hydrothermal Techniques
- The Effect of Additional Elements on Hydrogen Permeation Properties of Melt-Spun Ni-Nb-Zr Amorphous Alloys
- Hydrogen Permeation Characteristics of Melt-Spun Ni-Nb-Zr Amorphous Alloy Membranes
- Thermal Stability and Mechanical Properties of Glassy and Amorphous Ni-Nb-Zr Alloys Produced by Rapid Solidification
- Production of Ni_Cr_P_B_4 Metallic Glass-Coated Bipolar Plate for Fuel Cell by High Velocity Oxy-Fuel (HVOF) Spray Coating Method
- Soft Magnetic Properties of Ring Shape Bulk Glassy Fe-Al-Ga-P-C-B-Si Alloy Prepared by Copper Mold Casting
- Effect of Fe Content on the Glass-Forming Ability, Thermal Stability of Supercooled Liquid and Magnetic Properties of Fe_Al_5Ga_2(P_C_B_)_x Amorphous Alloys
- Preparation of Thick Amorphous Alloy Sheets in Multicomponent Fe-based Systems and Their Thermal and Magnetic Properties
- Oxide Glass/Amorphous Metal Alloy Laminated Membrane for Hydrogen Separation
- High Strength Ni-Fe-W and Ni-Fe-W-P Alloys Produced by Electrodeposition
- In-situ Electron Diffraction Study of Bulk Amorphous La_Al_Ni_ in the Supercooled Liquid Region
- Development of Ni-Pd-P-B Bulk Metallic Glasses with High Glass-Forming Ability
- Nucleation and Growth in Undercooled Melts of Bulk-Metallic-Glass Forming Zr_Ni_Al_ Alloy
- Microstructures of Pd_Ag_La_5 Alloy Studied by Transmission Electron Microscopy
- Heat Capacity and Thermodynamic Functions of Ni_Nb_Zr_ Glassy Alloy
- Formation of τ-Phase in Fe_Nb_B_ Amorphous Alloy with a Large Supercooled Liquid Region(Structure and Mechanical and Thermal Properties of Condensed Matter)
- Mechanical Property and Corrosion Resistance Evaluations of Ti-6Al-7Nb Alloy Brazed with Bulk Metallic Glasses
- Deformation-Induced Nanoscale Dynamic Transformation Studies in Zr-Al-Ni-Pd and Zr-Al-Ni-Cu Bulk Metallic Glasses
- Origin of the Effect of the Gas Atmosphere during Mold-Casting Zr_Al_Ni_Pd_ Bulk Glassy or Nano-Quasicrystal-Forming Alloy
- Characteristics of Shear Bands and Fracture Surfaces of Zr_Al_Ni_Pd_ Bulk Metallic Glass
- Influence of In-Situ Nanoprecipitation on Constant Load Deformation in the Glass Transition Region of a Cu_Zr_Ti_ Bulk Metallic Glass
- Microforming of Bulk Metallic Glasses : Constitutive Modelling and Applications
- Nanoporous Surfaces of FeAl Formed by Vacancy Clustering
- Deformation Behavior of Pt-based Metallic Glass at Elevated Temperatures
- Strengthening Mechanisms in Al-Based and Zr-Based Amorphous Nanocomposites
- Heat of Evolution and Non-Newtonian Viscous Flow of Pd_Ni_P_ Glassy Alloy
- Crystallization of Zr_Al_Ni_5Cu_ Bulk Metallic Glass Composites Containing ZrC Particles
- Synthesis and Mechanical Properties of Zr_Al_Ni_5Cu_ Bulk Glass Composites Containing ZrC Particles Formed by the In-Situ Reaction
- Transition from Linear to Nonlinear Viscoelasticity during Deformation in a Zr-based Glassy Alloy
- A Fictive Stress Model Calculationof Nonlinear Viscoelastic Behaviors in a Zr-Based Glassy Alloy : Stress Growth and Relaxation
- A Fictive Stress Model Calculation of Stress-Overshoot : A Nonlinear Viscoelastic Behavior in Metallic Glass
- Microstructure of Superplastic Zr_Al_Ni_Cu_ Metallic Glass
- High Tensile Strength Bulk Glassy Alloy Zr_Al_Ni_Cu_ Prepared by Extrusion of Atomized Glassy Powder
- Effect of Cu and P on the Crystallization Behavior of Fe-Rich Hetero-Amorphous FeSiB Alloy
- Fe-Rich Soft Magnetic FeSiBPCu Hetero-Amorphous Alloys with High Saturation Magnetization
- Displacement Behavior Study of the Shear Stress Effect on the Early Viscous Flow Nature of Fe-B-Nb-Y Metallic Glassy Powder in Spark Plasma Sintering
- Preparation of Bulk Glassy Fe_Si_9B_P_5 as a Soft Magnetic Material by Spark Plasma Sintering
- FeSiBPCu Nanocrystalline Soft Magnetic Alloys with High B_s of 1.9 Tesla Produced by Crystallizing Hetero-Amorphous Phase
- Effect of Cr Addition on the Glass-Forming Ability, Magnetic, Mechanical and Corrosion Properties of (Fe_Si_B_P_)_Cr_x Bulk Glassy Alloys
- Relationship between Microstructures and Soft Magnetic Properties of Simultaneously P and Cu-Added Fe-Nb-B Ribbon Alloys
- Direct Synthesis of L1_0 (Fe_Pt_)_Zr_B_ Nanocrystalline Alloys with High Coercivity by Melt-Spinning
- Magnetization Process and Coercivity of Fe-(Al, Ga)-(P, C, B, Si) Soft Magnetic Glassy Alloys
- Origin of Low Coercivity of Fe-(Al, Ga)-(P, C, B, Si, Ge) Bulk Glassy Alloys
- Random Anisotropy Model for Nanocrystalline Soft Magnetic Alloys with Grain-Size Distribution
- Soft Magnetic Properties of Nanocrystalline Fe-Nb-B-P Alloys Produced in the Atmosphere by Melt-Spinning Method
- Microstructure and Mechanical Properties of P/M Al-V-Fe and Al-Fe-M-Ti (M = V, Cr, Mn) Alloys Containing Dispersed Quasicrystalline Particles
- New Amorphous Alloys in Al-Ti Binary System
- Development of Common Mode Choke Coil Made of New Nanocrystalline Soft Magnetic Alloy "NANOPERM^[○!R]"
- High Strength Al-Ti-Fe Alloys Consisting of Amorphous and fcc-Al Phases Prepared by Rapid Solidification
- High Mechanical Strength of Al-(V, Cr, Mn)-(Fe, Co, Ni)Quasicrystalline Alloys Prepared by Rapid Solidification
- Faceted Etch Pits Formed on Surfaces of an Icosahedral Al_Pd_Mn_ Quasicrystal
- New Class of Amorphous and Icosahedral Phases in Zn-Mg-Rare-Earth Metal Alloys
- Magnetic Properties and Phase Stability of Icosahedral Al-Pd-Mn-B Quasicrystals
- Formation of Nanocrystalline Structures by Crystallization of Amorphous Fe-M-B (M=IVa to VIa Group Metal) Alloys
- Novel Face-Centered Icosahedral Phase in Al-Mg-Li System
- Mechanical Behavior of Amorphous Alloys at Elevated Temperatures
- Electron Microscope Study of Decagonal Quasicrystals of Al_Ni_Fe_
- Temperature Dependence of Hardness and Expansion in an Icosahedral Al-Pd-Mn Alloy
- Stable One-Dimensional Quasi Crystal in a Al-Cu-Fe-Mn System
- Crystallization-Induced Phason Relaxation in Icosahedral Al-Pd-Mn Alloys
- Production of Glassy Coil Springs by Warm Coiling of Zr-based Glassy Alloy Wires
- Fillability and Imprintability of High-strength Ni-based Bulk Metallic Glass Prepared by the Precision Die-casting Technique
- Fe-B-Si-Nb Bulk Metallic Glasses with High Strength above 4000MPa and Distinct Plastic Elongation
- Fabrication of Bulk Glassy Hf_Cu_Ni_Al_ Alloy by Copper Mold Casting
- Formation and Mechanical Properties of Ti-Zr-Ni-Cu Amorphous Alloy Containing Icosahedral Nanoscale Quasicrystalline Phase
- Bulk Glass Formation of Ti-Zr-Hf-Cu-M (M=Fe, Co, Ni) Alloys
- Ni-Rich Bulk Metallic Glasses with High Glass-Forming Ability and Good Metallic Properties
- Formation of a Ni-Based Glassy Alloy in Centimeter Scale
- New Amorphous Alloys with Good Ductility in Al-Ce-M (M=Nb, Fe, Co, Ni or Cu) Systems : Condensed Matter
- Preparation of Fe_Co_Ga_5P_C_4B_4 Bulk Glassy Alloy with Good Soft Magnetic Properties by Spark-Plasma Sintering of Glassy Powder
- Structure and Magnetic Properties of Fe_Co_Nb_7B_8 Nanocrystalline Alloy
- Bulk Glassy Co_Fe_Ta_B_ Alloy with High Glass-Forming Ability and Good Soft Magnetic Properties
- (Fe, Co)-(Hf, Nb)-B Glassy Thick Sheet Alloys Prepared by a Melt Clamp Forging Method
- The Liquid-Enhanced Plasticity and Deformation Behavior of Cu-Mg-TiC Nanocrystalline Composite
- Bulk Glassy Fe_Co_xGa_2P_C_4B_4 Alloys with High Saturation Magnetization and Good Soft Magnetic Properties
- Bulk Glassy Fe-Ga-P-C-B Alloys with High Saturation Magnetization and Good Soft Magnetic Properties Synthesized by Fluxing Treatment and Copper Mold Casting
- Bulk Amorphous Fe-P-B-C Alloys with a Large Supercooled Liquid Region
- New Ti-Based Bulk Glassy Alloys with High Glass-Forming Ability and Superior Mechanical Properties
- Formation of New Ti-based Metallic Glassy Alloys
- Soft Magnetic Properties of Fe-Based Bulk Amorphous Alloys
- Densification of Gas Atomized Ni-Based Metallic Glassy Powders by Spark Plasma Sintering
- Microwave Sintering of Ni-Based Bulk Metallic Glass Matrix Composite in a Single-Mode Applicator
- Unusual Glass-Forming Ability of New Zr-Cu-Based Bulk Glassy Alloys Containing an Immiscible Element Pair
- Glass Forming Ability and Mechanical Properties of New Ni-Based Bulk Metallic Glasses
- Fabrication of New Cu_Pd_2Zr_Ag_8Al_8 Bulk Glassy Alloy with a Diameter of 30mm
- Unusual Plasticity of the Particulate-Reinforced Cu-Zr-Based Bulk Metallic Glass Composites
- Influence of Al and Ag on the Devitrification Behavior of a Cu-Zr Glassy Alloy
- Transition from Plasticity to Brittleness in Cu-Zr-Based Bulk Metallic Glasses
- Microstructural Changes during Microwave Heating of Ni_Zr_Nb_Ti_Pt_ Metal Glasses
- Preparation of Cu_Zr_Ag_8Al_8 Bulk Metallic Glass with a Diameter of 25mm by Copper Mold Casting
- Fabrication of ZrCuAlNi Metallic Glassy Matrix Composite Containing ZrO_2 Particles by Spark Plasma Sintering Process
- Bulk Metallic Glass Formation near a Quaternary Cu-Zr-Ti-Al Eutectic Point
- Nanocrystallization of Cu_Zr_Ti_5 Metallic Glass Induced by Electron Irradiation
- Formation and Properties of New La-Based Bulk Glassy Alloys with Diameters up to Centimeter Order
- Synthesis and Thermal Stability of New Ni-Based Bulk Glassy Alloy with Excellent Mechanical Properties
- Effects of Additional Hf on the Thermal Stability and Mechanical Properties of Cu-Zr-Ag Bulk Glassy Alloys