Ductile-Brittle Transition Temperature of Ultrafine Ferrite/Cementite Microstructure in a Low Carbon Steel Controlled by Effective Grain Size

概要

論文の詳細を見る
To analyze the good toughness of ultrafine ferrite/cementite steels, the concept of effective grain size (dEFF) is applied to ductile-to-brittle transition temperature, DBTT, for ultrafine ferrite/cementite (Uf-F/C), ferrite/pearlite (F/P), quenched (Q), and quench-and-tempered (QT) microstructures in a low carbon steel. The dEFF is determined to be 8, 20, 100, and 25 μm for Uf-F/C, F/P, Q, and QT, respectively. In F/P and Q, it is in accordance with the ferrite grain size and the prior austenite grain size, respectively. In QT, the dEFF fits the martensite packet size. In Uf-F/C, the ferrite grain size has a bimodal distribution and the larger grain size corresponds to the dEFF, which is the smallest among the four microstructures. In terms of the relationship between dEFF and DBTT, the Uf-F/C, Q, and QT microstructures can be placed into the same group and the F/P to a different one. Furthermore, the Uf-F/C has the highest estimated fracture stress among the four microstructures. These might be the result of the difference in the surface energy of fracture, namely the former is estimated to have a surface energy of 34.6 J/m2 and latter a surface energy of 7.7 J/m2. Thus, the excellent toughness of the ultrafine ferrite/cementite steel can be attributed to the small dEFF and the high surface energy of fracture.
社団法人日本鉄鋼協会の論文
2004-03-15