Recovery of ^<14>C from Graphite Moderator of Gas-Cooled Reactor (GCR)
スポンサーリンク
概要
- 論文の詳細を見る
The chemical exchange method of carbon isotopes between CO2 and carbamate was applied to the recovery of 14C from 1,600 t graphite moderator of a gas-cooled reactor (GCR), Tokai-1, and the dimensions of 14C-enrichment process were evaluated numerically. Applicability of two processes with different operation modes, continuous process and batch process, was discussed under the conditions that the concentration of 14CO2 in the stripped flow corresponding to 99% of feed CO2 is less than the environmental standard.For the continuous process using 2 mol/l diethylamine (DEA)-octane solution as a working fluid at −20°C and 0.2 MPa, the column dimensions were evaluated as 3.2 m in diameter and 5.7 m in height in the case of operating period of 20 yr. For the batch process using 4 mol/l DEA-octane solution, the column dimensions were comparable to those of continuous process, when the process was operated at the rate of 4 batch/month under the conditions of −20°C and 0.3 MPa. From these results, it is concluded that the CO2/carbamate exchange method is applicable to the recovery of 14C from irradiated graphite. However, the batch process has serious disadvantages, such as large energy consumption to maintain the top reservoir at low temperature and the generation of a large quantity of secondary wastes. At the present stage, the continuous process should be selected for the practical process design.
- 社団法人 日本原子力学会の論文
- 2002-11-25
著者
-
FUJII Yasuhiko
Research Laboratory for Nuclear Reactors, Tokyo Institute of Technology
-
TAKESHITA Kenji
Chemical Resources Laboratory, Tokyo Institute of Technology
-
Fujii Yasuhiko
Research Laboratory For Nuclear Reactors Tokyo Institute Of Technology
-
Takeshita K
Tokyo Inst. Of Technol. Yokohama
-
Takeshita Kenji
Department Of Physics Faculty Of Science Kyushu University
-
NAKANO Yoshio
Department of Environmental Chemical and Engineering, Interdisciplinary Graduate School of Science a
-
SHIMIZU Masami
Isotope Science Laboratory
-
Nakano Yoshio
Department Of Environmental Chemistry And Engineering Tokyo Institute Of Technology
-
Takeshita Kenji
Department Of Environmental Chemistry And Engineering Interdisciplinary Graduate School Of Science A
-
Nakano Yoshio
Department Of Chemical Engineering Faculty Of Engineering Shizuoka University
-
Nakano Yoshio
Department of Environmental Chemistry and Engineering, Tokyo Institute of Technology
関連論文
- Strontium Isotope Effects Observed in Liquid Chromatography with Crown Ether Resins
- Am/Eu Separation with a New Ligand, N,N,N',N'-tetrakis((4-butoxypyridin-2-yl)methyl)ethylenediamine (TBPEN), a Hydrophobic Derivative of TPEN
- Zinc Isotope Effects Observed by Liquid Chromatography with Benzo-15-Crown-5 Resin
- Zinc Isotope Effects in Benzo Crown Resin by Displacement Chromatography
- Zinc Isotope Fractionation on Benzo-15-crown-5 Resin by Liquid Chromatography
- A Study on Zinc Isotope Fractionation in a Benzo Crown Resin/Acetone System
- Zinc Isotope Accumulation in Liquid Chromatography with Crown Ether Resin
- Novel Syntheses Method of Phenol Type Benzo-15-Crown-5 Ether Resin and its Application for Lithium Isotope Separation
- Zinc Isotope Separation by Phenol Formaldehyde Type 15-Crown-5 Resin in Organic Solvents
- Temperature Dependence of Isotope Effects in Uranium Chemical Exchange Reactions
- Separation of vanadium isotopes by ion-exchange chromatography
- Enrichment of U-232 by U(IV)-U(VI) Redox Ion Exchange Chromatography
- Nitrogen Isotope Separation by Means of Cation Exchange Resin, (I) Effects of Eluent Concentration
- Contact Ionization Ion Sources for Ion Cyclotron Resonance Separation ( Plasma Processing)
- Influence of Network Structure and Hydration on Viscoelastic Behavior of N-Isopropylacrylamide Gel
- CONCEPT TO CONTROL THE PHASE BEHAVIOR OF STIMULI-SENSITIVE POLYMER GEL
- Theoretical Analysis of Separating Nitrogen Isotopes by Ion-Exchange, (II)
- Theoretical Analysis of Separating Nitrogen Isotopes by Ion-Exchange
- Preparation of High Activity Catalyst for Ammonia Synthesis by Supporting Well-Defined Ru Nanoparticles on γ-Al_2O_3
- Formation of Ruthenium Colloid in Ethylene Glycol
- Selective Recovery Process for Gold Utilizing a Functional Gel Derived from Natural Condensed Tannin
- Selective Separation of Am(III) from Ln(III) with a Novel Synergistic Extraction System, N, N, N', N'-tetrakis(2-methylpyridyl) -ethylenediamine (TPEN) and Carboxylic Acid in 1-Octanol
- Extraction of Cd(II) and Zn(II) with Dialkylthiophosphinic Acid and Hexadentate Nitrogen-donor Ligand
- Separation of Americium(III) from Lanthanide by Encapsulating Hexadentate-ligand
- Recovery of ^C from Graphite Moderator of Gas-Cooled Reactor (GCR)
- Thermal-Swing Extraction of Cd(II) by Thermosensitive Gel Crosslinked with Nitrogen-donor Ligands
- Development of a Multi-functional Reprocessing Process based on Ion-exchange Method by using Tertiary Pyridine-type Resin
- Separation and Utilization of Tc and Other Rare Metal Fission Products by an Extended Aqueous Reprocessing
- Chromatographic Separation of Trivalent Actinides by Using Tertiary Pyridine Resin with Methanolic Nitric Acid Solutions
- Improvement of Pd(II) Adsorption Performance of Condensed-tannin Gel by Amine Modification
- Isotope Effects in Electron Exchange Reactions
- Chromatographic Separation of Lithium Isotopes with Silica Based Monobenzo-15-crown-5 Resin
- Isotope Effects of Zinc in Crown Ether Chromatography
- Oxidation catalyst of iron oxide suppressing dioxin formation in polyethylene combustion
- Ion Exchange Separation for Decontamination of Centrifuge Enrichment Plant
- Chromatographic observation of boron isotopic fractionation between kaolin clay and boron bearing solution : A high pressure experiment
- Identification and Molecular Characterization of an N-Acetylmuraminidase, Aml, Involved in Streptococcus mutans Cell Separation
- Thermal-Swing Extraction Separation of Am (III) and Eu (III) with Poly-NIPA Gel Crosslinked with TPEN Derivative
- Thermal-swing Extraction of Cadmium(II) by Thermosensitive Polymer Gel Crosslinked with Encapsulating Hexadentate Ligand
- Adsorption Mechanism of Selenite (Se^) by Redox within Condensed-tannin Gel under Concentrated Hydrochloric Acid Solution
- Optical-Response Extraction of Au(III) with Bis(2,2'-dipyridyl-6-yl)diazene and Octanoic Acid
- EFFECT OF SALT ON THE PROPERTY OF ADSORPTION IN THERMOSENSITIVE POLYMER HYDROGEL
- On the Neutrons from the N^(d, n) O^ Reaction-II
- On the Neutrons from the N^(d,n)O^ Reaction
- Adsorption Behaviour of Some Actinide and Lanthanide Elements on Pyridine-type Anion Exchange Resin from Hydrochloric Acid Solution
- Dissociation Properties of Amino Groups in the Chitosan Gel Particles Prepared by the Suspension Evaporation Method
- Efficient Catalytic Reduction of Concentrated Nitric Acid on the Adsorption Sites of Activated Carbon
- Preparation of Tetrahedral Pt Nanoparticles Having {111} Facet on Their Surface
- Oxygen Diffusion and Microbial Activity in the Composting of Dehydrated Sewage Sludge Cakes
- Mechanisms of Lead Removal from Aqueous Solutions Using a Novel Tannin Gel Adsorbent Synthesized from Natural Condensed Tannin
- Cooling of Adsorbent Bed in Plate Heat Exchanger Type Adsorption Reactor
- The Reaction F^(d,n)Ne^ and the Energy Levels of Ne^
- Homogeneous Enzymatic Assay for L-Cysteine with βC-S Lyase
- Temperature-swing adsorption of proteins in water using N-isopropylacrylamide copolymer gel particles
- Thermoresponsive extraction of cadmium(II) ions by poly(TPEN-NIPA) gels. Effect of chain length and branched spacer structure on gel formation and extraction behavior
- Science and Technology of Polymer Gels
- Isotope Effects in Eu(II)/Eu(III) Electron Exchange System Observed by Using Cation Exchange Chromatography
- Selective Separation of Am(III) from Ln(III) with a Novel Synergistic Extraction System, N, N, N', N'-tetrakis(2-methylpyridyl) -ethylenediamine (TPEN) and Carboxylic Acid in 1-Octanol
- Fatal Diarrheal Disease Caused by Vibrio cholerae O67 in a Patient with Myelodysplastic Syndrome
- Behavior of ions within hydrogel and its swelling properties.
- Transport of ions inside polymer gel in an electric field.
- Distribution of total pressure within a bed of porous powders accompanied by adsorption and desorption of gases.
- Isotope effects in electrolytic formation of lithium amalgam.