Effects of Dendrite Cell Size and Eutectic Si Particle Morphology on Fatigue Crack Growth in Cast and HIPed AC4CH Alloys
スポンサーリンク
概要
- 論文の詳細を見る
- Japan Institute of Metalsの論文
- 1999-07-20
著者
-
KUMAI Shinji
Department of Materials Science and Engineering, Tokyo Institute of Technology
-
Sato A
National Res. Inst. Metals Ibaraki Jpn
-
Han Sang-won
Department Of Materials Science And Engineering Tokyo Institute Of Technology
-
Han Sang-won
Graduate School Of Mechanical Engineering Ajou University
-
Kumai S
Department Of Materials Science And Engineering Tokyo Institute Of Technology
-
Kumai Shinji
Department Of Materials Science And Engineering Tokyo Institute Of Technology
-
SATO Akikazu
Department of Materials Science and Engineering, Tokyo Institute of Technology
-
Sato Akikazu
Department Of Materials Science And Engineering The Graduate School Of Science And Engineering Tokyo
-
AOKI Shoji
Department of Materials Science and Engineering, Tokyo Institute of Technology
-
Aoki Shoji
Department Of Materials Science And Engineering Tokyo Institute Of Technology
-
Han Sang-won
Department Of Materials Science And Engineering Kaist
-
Kumai Shinji
Department Of Materials Science And Engineering Interdisciplinary Graduate School Of Science And Eng
-
KUMAI Shinji
Department of Material Science and Engineering, Tokyo Institute of Technology
関連論文
- Formation of Internal Crack in High-Speed Twin-Roll Cast 6022 Aluminum Alloy Strip
- Cyclic Deformation and Development of Dislocation Structures in a Centrifugally Cast Al-Al_3Ti of Functionally Graded Material
- Microstructural Refinement of Hyper-Eutectic Al-Si-Fe-Mn Cast Alloys to Produce a Recyclable Wrought Material
- Effect of Crystallographic Orientation on Dissolution Behavior of Stainless Steels Single Crystal
- The Effects of Static Strain on the Damping Capacity of High Damping Alloys
- Characterization of the Strain-amplitude and Frequency Dependent Damping Capacity in the M2052 Alloy
- Decomposition Behavior of the γ_ Solid Solution in a Mn-20Cu-8Ni-2Fe(at%) Alloy Studied by a Magnetic Measurement
- Decomposition of High Temperature γ_ Phase during Continuous Cooling and Resultant Damping Behavior in Mn_Cu_Ni_Fe_ and Mn_Cu_Ni_Fe_ Alloys
- High-Speed Twin-Roll Strip Casting of Al-Mg-Si Alloys with High Iron Content
- Refined Solidification Structure and Improved Formability of A356 Aluminum Alloy Plate Produced using a High-Speed Twin-Roll Strip Caster
- Interfacial Microstructure of Aluminum/Metallic Glass Lap Joints Fabricated by Magnetic Pulse Welding
- Second Order Electrical Resistivity Decay Quenched Aluminum
- Tear Toughness Evaluation of a Permanent Mold Cast A356 Aluminum Alloy Using a Small-size Specimen
- Tear Toughness of Permanent Mold Cast and DC Cast A356 Aluminum Alloys
- Plastic Deformation of D0_ Ordered Al_3Ti in a Centrifugally Cast Al-Al_3Ti Composite
- Solar Panel Deployment Analysis of a Satellite System ( Multibody Dynamics)
- Growth Manner of Intermetallic Compounds at the Weld Interface of Steel/Aluminum Alloy Lap Joint Fabricated by a Defocused Laser Beam
- High-Speed Twin Roll Casting of Thin Aluminum Alloy Strips Containing Fe Impurities
- Resolution of Cu Atoms in a GP[1] Zone in Al-Cu by FIM and Determination of the GP[1] Structure
- Origin of Improved Ductility in Semi-Liquid Die-Cast Al-7%Si-0.4%Mg Alloys
- Effects of Dendrite Cell Size and Eutectic Si Particle Morphology on Fatigue Crack Growth in Cast and HIPed AC4CH Alloys
- Gas Pore Formation in Lost Foam Casting of AZ91H Mg Alloy in Comparison with A356 Al Alloy
- Interaction Energy between a Self-Interstitial and a (1/2) Screw Dislocation in BCC Transition Metals
- Calculation of Core Structure and Core Energy of a (1/2) Screw Dislocation in BCC Transition Metals: Inclusion of d-Orbital Anisotropy
- The Effects of Straining Frequency and Stress Ratio on Polarization Current Responded to Cyclic Strain in a Commercial Iron
- Effects of Extrusion Temperature on Creep Properties of Spray-Formed and Hot-Extruded Al-8.3 mass%Fe Alloys
- Constant ΔΚ Fatigue Crack Growth Tests under Programmed Humidity Cycle Conditions-As a Tool to Evaluate the Effect of Humidity on Fatigue Crack Growth of Al-Li Alloys-
- Simulation and Experimental Analysis of Metal Jet Emission and Weld Interface Morphology in Impact Welding
- Interfacial Morphology of Magnetic Pulse Welded Aluminum/Aluminum and Copper/Copper Lap Joints
- Growth Manner of Intermetallic Compound Layer Produced at Welding Interface to Friction Stir Spot Welded Aluminum/Steel Lap Joint
- Microstructural Development during Fatigue of a Polycrystalline 3003 Aluminum Alloy
- Characterization of Intermetallic Compound Layer Formed at the Weld Interface of the Defocused Laser Welded Low Carbon Steel/6111 Aluminum Alloy Lap Joint
- Effect of Cooling Rates during Solidification of Al-5.5%Mg-2.3%Si-0.6%Mn and Al-13% Mg_2Si Pseudo-Binary Alloys on Their Secondary-Particle Morphology and Tear Toughness
- Competitive Nucleation and Growth of {111} Ω with {001} GP Zones and θ' in a Stress-Aged Al-Cu-Mg-Ag Alloy
- Effect of Si Content on Strip Thickness and Solidified Structure in High-Speed Twin-Roll Cast Al-Si Alloy Strips
- Effects of Mechanical constraint on the Strength of Ni_3Ge Single Crystals
- Microstructure and Joint Strength of Friction Stir Spot Welded 6022 Aluminum Alloy Sheets and Plated Steel Sheets
- Advanced High-Speed Solid-State Joining of 2024 Aluminum Alloy Studs to 5052 Aluminum Alloy Plates
- Effects of High-Temperature Solutionizing on Microstructure and Tear Toughness of A356 Cast Aluminum Alloy
- High-Speed Deformation and Collision Behavior of Pure Aluminum Plates in Magnetic Pulse Welding
- Microstructural Characterization of Intermediate Layer Produced at Aluminum/Metallic Glass Interface Fabricated by Magnetic Pulse Welding
- Microstructural Characterization of Intermediate Layer Produced at Aluminum/Metallic Glass Interface Fabricated by Magnetic Pulse Welding
- Influence of probe bottom shape on microstructure and mechanical properties in friction stir spot welded 6022 aluminum alloy sheets
- Martensitic Transformation and Shear Deformation Examined by In-situ Experiments in a HVEM.
- Casting of Aluminum Alloy Clad Strip using a Roll Caster
- Magnetic Anisotropy Caused by the Formation of Stress-induced Martensite in Small Iron Particles in a Copper Matrix.