Evaluation of High Temperature Tensile and Creep Properties of Light Water Reactor Coolant Piping Materials for Severe Accident Analyses

概要

論文の詳細を見る
It has been pointed out that the reactor coolant system piping could fail prior to the meltthrough of the reactor pressure vessel in a high pressure sequence of pressurized water reactor severe accidents. In order to apply to the evaluation of the piping failure which influences the subsequent accident progression, models for the strength of piping materials at high temperatures were examined. It was found that 0.2% proof stress and ultimate tensile strength above 1,073 K obtained from tensile tests was reproduced by a quadratic equation of the reciprocal absolute temperature. Short-term creep rupture time and minimum creep rate at high temperatures were well correlated by the modified Norton’s Law as a function of stress and temperature, which implicitly expressed the effect of the precipitation and the resolution of precipitates on the creep strength. The modified Norton’s Law gave better results than the conventional Larson-Miller method. Relating applied stress vs. minimum creep rate and tensile properties vs. applied strain rate obtained from the creep and tensile tests, a temperature range where the dynamic recrystallization significantly occurred was evaluated.
社団法人日本原子力学会の論文