Microstructure and Mechanical Properties of Mo-Si-Al Alloy and Mo-Si-Al/SiC Composite (ニュ-コンポジット材料<特集>)
スポンサーリンク
概要
- 論文の詳細を見る
Mo-Si-Al alloy and Mo-Si-Al/SiC composite were fabricated by the powder metallurgical process from a novel Mo-Si-Al prealloyed powder, and their microstructure and mechanical properties were evaluated. The Mo-Si-Al and Mo-Si-Al/15 vol%SiC mixed powders were hot-pressed in an argon atmosphere. XRD analyses revealed that Mo-Si-Al/SiC composites were composed of MoSi<SUB>2</SUB> (tetragonal, Cll<SUB>σ</SUB> structure), Mo(Si, Al)<SUB>2</SUB> (hexagonal, C40 structure), a-Al<SUB>2</SUB>O<SUB>3</SUB>, Mo<SUB> ?? 5</SUB>Si<SUB>3</SUB>C<SUB> ?? 1</SUB> and β-SiC. Almost no glassy SiO<SUB>2</SUB> phase was found in Mo-Si-Al and Mo-Si-Al/SiC systems contrary to MoSi<SUB>2</SUB> and MoSi<SUB>2</SUB>/SiC. The formation of α-Al<SUB>2</SUB>O<SUB>3</SUB> was attributed to the predominant oxidation of aluminum at the surface of the Mo-Si-Al prealloyed powder. Mo-Si-Al based systems showed the better high-temperature strength mainly due to the elimination of glassy SiO<SUB>2</SUB> and the crystallographical change from t-MoSi<SUB>2</SUB> to h-Mo(Si, Al)<SUB>2</SUB>. Incorporation of fine SiC particles enabled to control microstructure and then to enhance mechanical properties.
- 社団法人 粉体粉末冶金協会の論文
- 1996-03-15
著者
-
SEKINO Tohru
The Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
-
NAKAHIRA Atsushi
Kyoto Inst. Tech.
-
Sekino T
Osaka Univ. Osaka
-
Sekino Tohru
The Inst. Of Multidisciplinary Res. For Advanced Materials Tohoku Univ.
-
Sekino Tohru
The Institute Of Scientific And Industrial Research Osaka University
-
Niihara K
Osaka Univ. Osaka Jpn
-
Nihara K
The Institute Of Scientific And Industrial Research Osaka University
-
Nakahira A
The Institute Of Scientific And Industrial Research Osaka University
-
Niihara Koichi
The Institute Of Scientific And Industrial Research Osaka University
-
SUZUKI Yoshikazu
The Institute of Scientific and Industrial Research, Osaka University
-
NAKAHIRA Atsushi
The Institute of Scientific and Industrial Research, Osaka University
-
Suzuki Yoshikazu
The Institute Of Scientific And Industrial Research Osaka University
-
Nakahira Atsushi
The Institute of Scientific & Industrial Research, Osaka University
-
Niihara Koichi
The Institute of Science and Industrial Research, Osaka University
関連論文
- Preparation of functional metal nanoparticles embedded mullite composite powders by solid solution reduction
- Crystal orientation alignment induced by coarsening under a magnetic field
- Formation of Crystallographically Aligned Grains during Coarsening in a Magnetic Field
- PROCESSING AND MECHANICAL PROPERTIES OF Si_3N_4/SiC NANOCOMPOSITES USING Si NITRIDED Si_3N_4 POWDER
- Fabrication and Mechanical Properties of Si3N4/SiC Nanocompoisites under Pressureless Sintering (特集 ナノ構造制御と新機能発現)
- Improvement of Mechanical Properties of Polymer Blends Through Microstructure Control by Al_2O_3 Particle Addition
- Magnetocaloric Effect of Super-paramagnetic Nanocomposite Composed of Iron-Oxide and Silver
- Formation of Iron-Nitride/Silver Nanocomposites by Ammonia-Flow Method and Nitride Phase Identification by X-Ray Absorption Near-Edge Structure
- Magnetic Mullite-iron Composite Nanoparticles Prepared by Solid Solution Reduction
- Improvement of Mechanical Properties of Piezoelectric Ceramics by Incorporating Nano Particles (特集 アモルファス・ナノ結晶制御と高機能材料)
- FABRICATION OF POLYCRYSTALLINE ALUMINA/YAG COMPOSITE FIBERS BY SOL-GEL PROCESS USING α-ALUMINA FINE SEED PARTICLES(Special Issue on Recent Advances of Composites in Asia and Australasia)
- Dielectric Properties of Pb(Zr, Ti)O_3-Dispersed MgO Nanocomposite
- Structural Changes in Ba(Sr_Ta_)O_3-Type Perovskite Compounds upon Tilting of Oxygen Octahedra
- Anomaly in the Infrared Active Phonon Modes and Its Relationship to the Dielectric Constant of (Ba_Sr_x)(Mg_Ta_)O_3 Compound
- Mechanical properties of 2.0-3.5mol% Y_2O_3-stabilized zirconia polycrystals fabricated by the solid phase mixing and sintering method
- Mechanical properties of Y_2O_3-stabilized ZrO_2 polycrystals fabricated by the solid phase mixing and sintering method
- Microstructure and Mechanical Properties of Mo-Si-Al Alloy and Mo-Si-Al/SiC Composite (ニュ-コンポジット材料)
- Mechanical Property and Fracture Behavior of BaTiO3-Based Nanocomposites (高次制御材料-1-)
- Effects of SiC Particles on α-β Phase Transformation and Mechanical Properties of Si3N4/SiC Composites (高次制御材料-1-)
- Structure of Amorphous Silicon Nitride(a-Si3N4) (高次制御材料-2-)
- Dielectric Properties of Pb(Zr, Ti)O3-Dispersed MgO Nanocomposite
- Microstructure and Crystal Phase Development of Y2O3-Stabilized ZrO2 Polycrystal Fabricated by the Solid Phase Mixing and Sintering Method