スポンサーリンク
Department of Materials Engineering, National Chung Hsing University | 論文
- Surface Texturing for Wafer-Bonded Vertical-Type GaN/Mirror/Si Light-Emitting Diodes
- Improvement in Extraction Efficiency of GaN-Based Light-Emitting Diodes with Textured Surface Layer by Natural Lithography
- Near-Ultraviolet InGaN/GaN Light-Emitting Diodes Grown on Patterned Sapphire Substrates
- Improvement in GaN-based light-emitting diodes by surface texturization with natural lithography
- GaN/Mirror/Si Light-Emitting Diodes for Vertical Current Injection by Laser Lift-Off and Wafer Bonding Techniques
- Characterization of Large-Area AlGaInP/Mirror/Si Light-Emitting Diodes Fabricated by Wafer Bonding
- High-Power AlGaInP Light-Emitting Diodes with Patterned Copper Substrates by Electroplating
- Ion-Implantation Treatment(Ba, Sr)TiO_3 Thin Films
- Structural Phase Transition of AgO_x Sandwiched Between ZnS-SiO_2 Protective Layers Under Thermal and Laser Pulse Annealing for Super-Resolution Near-Field Recording
- The Characteristics of Reactively Sputtered AgO_x Films Prepared at Different Oxygen Flow Ratios and Its Effect on Super-Resolution Near-Field Properties
- Investigation of Dielectric Properties of BaZr(BO_3)_2 Ceramics
- Low Temperature Sintering and Microwave Dielectric Properties of Ba_2Ti_9O_ Ceramics with 3ZnO-B_2O_3 Addition
- Effects of B_2O_3 Addition on the Microwave Dielectric Properties of Ba_2Ti_9O_ Ceramics
- Transparent barrier coatings for flexible organic light-emitting diode applications
- Effects of Transparent Conductive Layers on Characteristics of InGaN-Based Green Resonant-Cavity Light-Emitting Diodes
- Fabrication the Nanoporous InGaN-based Light-Emitting Diodes
- Fabrication InGaN Nano-disk Structure in GaN Reverse Hexagonal Pyramid
- Diffusion and Formation of Intermetallic Compounds during Accumulative Roll-Bonding of Al/Mg Alloys
- Preparation of Mg-Li-Al-Zn Master Alloy in Air by Electrolytic Diffusing Method
- Evaluation of a New Hydrogen Generating System : Ni-Rich Magnesium Alloy Catalyzed by Platinum Wire in Sodium Chloride Solution