Interval of Observation Plane in Visualization of Region near Defects in Billets Using Ultrasonic Computerized Tomography Method
スポンサーリンク
概要
- 論文の詳細を見る
We performed defect detection simulation considering billets with a deep-hole or spherical defect. We conducted defect detection in a billet of duralumin with a deep-hole defect and found no discrepancy between our previous and present research results because the images obtained are similar. We also conducted defect detection in a billet of steel with a spherical defect. We obtained visualization images in multiple measurement planes. We also obtained three-dimensional visualization images by binarizing the pseudo sound velocity. From the images, we found that the three-dimensional visualization of spherical defects is possible and that the scanning pitch in the longitudinal direction is about 10 mm at maximum.
- 2013-07-25
著者
-
Mizutani Koichi
Faculty of Engineering, Information and Systems, University of Tsukuba
-
Wakatsuki Naoto
Faculty of Engineering, Information and Systems, University of Tsukuba
-
Norose Yoko
Graduate School of Systems and Information Engineering, University of Tsukuba, Tsukuba, Ibaraki 305-8573, Japan
-
Mizutani Koichi
Faculty of Engineering, Information and Systems, University of Tsukuba, Tsukuba, Ibaraki 305-8573, Japan
-
Kakuma Koichi
Graduate School of Systems and Information Engineering, University of Tsukuba, Tsukuba, Ibaraki 305-8573, Japan
関連論文
- Effect of acrylic cover on convergence property of aplanatic and hyperbolic Fresnel lenses
- Artifact Reduction in Tomographic Images for Nondestructive Testing of Square Billets Using Ultrasonic Computerized Tomography
- Evaluation of Acousto-Optic Effect on Size Distribution Measurement of Oscillating Cavitation Bubbles Using Optical Spectrometer
- Direction of Arrival Estimation Based on Delayed-Sum Method in Reverberation Environment
- Design and Numerical Evaluation of Off-Axis Aplanatic Straubel Mirror for Underwater Acoustic Imaging
- Acoustic Hygrometer Based on Reverberation Time Measurement
- Measurement of Liquid Viscosity and Density Using Single Piezoelectric Resonator with Two Vibration Modes
- Nondestructive Inspection for Steel Billet Using Phase-Modulated Signal by Gold Sequence for Improving Measurement Speed
- Interval of Observation Plane in Visualization of Region near Defects in Billets Using Ultrasonic Computerized Tomography Method
- Simultaneous Measurement of Air Temperature and Humidity Based on Sound Velocity and Attenuation Using Ultrasonic Probe
- Measurement of Diffraction Pattern Using Two-Dimensional Image Sensor for Obtaining Instantaneous Diameter Distribution of Acoustic Cavitation Bubbles
- Localization of Acoustic Reflective Boundary Using a Pair of Microphones and an Arbitrary Sound Source (Special Issue : Ultrasonic Electronics) -- (Ocean acoustics)
- Speeding Up of Nondestructive Inspection for Shape-Distorted Billet by Simultaneous Measurement of Time of Flight (Special Issue : Ultrasonic Electronics) -- (Measurement techniques, imaging, nondestructive evaluation)
- Measurement of Diffraction Pattern Using Two-Dimensional Image Sensor for Obtaining Instantaneous Diameter Distribution of Acoustic Cavitation Bubbles
- Application of ultrasonic computerized tomography using time-of-flight measured by transmission method to nondestructive inspection for high-attenuation billets