Nondestructive Inspection for Steel Billet Using Phase-Modulated Signal by Gold Sequence for Improving Measurement Speed
スポンサーリンク
概要
- 論文の詳細を見る
We have proposed an ultrasonic computerized tomography method using the time-of-flight (TOF) of a longitudinal wave as a defect detection method for a steel billet. However, it took a long time to measure the TOFs because the transmissions were made one by one from the requirement of independent signal transmission. In this study, to speed up the TOF measurement, we proposed a simultaneous measurement method of TOFs using the phase-modulated signals by Gold sequences, and evaluated the ability of simultaneous measurement by an experiment. The reflected wave from the billet surface had a very adverse effect on the measurement of TOF, so a short signal was required as the transmitted signal. To make the transmitted signal short, a half-sine pulse phase-modulated by a Gold sequence was employed. As a result, five simultaneous transmissions were possible to be used for the inspection of the billet. When five simultaneous transmissions are made, the total measurement time can be decreased to 1/5 of the previous one.
- 2012-07-25
著者
-
Mizutani Koichi
Faculty of Engineering, Information and Systems, University of Tsukuba
-
Wakatsuki Naoto
Faculty of Engineering, Information and Systems, University of Tsukuba
-
Norose Yoko
Graduate School of Systems and Information Engineering, University of Tsukuba, Tsukuba, Ibaraki 305-8573, Japan
-
Mizutani Koichi
Faculty of Engineering, Information and Systems, University of Tsukuba, Tsukuba, Ibaraki 305-8573, Japan
関連論文
- Effect of acrylic cover on convergence property of aplanatic and hyperbolic Fresnel lenses
- Artifact Reduction in Tomographic Images for Nondestructive Testing of Square Billets Using Ultrasonic Computerized Tomography
- Evaluation of Acousto-Optic Effect on Size Distribution Measurement of Oscillating Cavitation Bubbles Using Optical Spectrometer
- Direction of Arrival Estimation Based on Delayed-Sum Method in Reverberation Environment
- Design and Numerical Evaluation of Off-Axis Aplanatic Straubel Mirror for Underwater Acoustic Imaging
- Acoustic Hygrometer Based on Reverberation Time Measurement
- Measurement of Liquid Viscosity and Density Using Single Piezoelectric Resonator with Two Vibration Modes
- Nondestructive Inspection for Steel Billet Using Phase-Modulated Signal by Gold Sequence for Improving Measurement Speed
- Interval of Observation Plane in Visualization of Region near Defects in Billets Using Ultrasonic Computerized Tomography Method
- Simultaneous Measurement of Air Temperature and Humidity Based on Sound Velocity and Attenuation Using Ultrasonic Probe
- Measurement of Diffraction Pattern Using Two-Dimensional Image Sensor for Obtaining Instantaneous Diameter Distribution of Acoustic Cavitation Bubbles
- Localization of Acoustic Reflective Boundary Using a Pair of Microphones and an Arbitrary Sound Source (Special Issue : Ultrasonic Electronics) -- (Ocean acoustics)
- Speeding Up of Nondestructive Inspection for Shape-Distorted Billet by Simultaneous Measurement of Time of Flight (Special Issue : Ultrasonic Electronics) -- (Measurement techniques, imaging, nondestructive evaluation)
- Measurement of Diffraction Pattern Using Two-Dimensional Image Sensor for Obtaining Instantaneous Diameter Distribution of Acoustic Cavitation Bubbles
- Application of ultrasonic computerized tomography using time-of-flight measured by transmission method to nondestructive inspection for high-attenuation billets