Quadruple-Layer Write-Once Disk for Blue Laser Based on Te–O–Pd Recording Films

概要

論文の詳細を見る
The excellent performance of a 100-GB-capacity write-once disk was demonstrated. The disk has quadruple recording layers, i.e., Layer 3, 2, 1, and 0 (from the laser-incident side of the disk) based on the $4\times$ Blu-ray disc (BD) format. Each layer is provided with a phase-change type memory film of Te–O–Pd, whose thickness was 20 nm for Layer 0, and only 6 nm for Layers 1, 2, and 3 in order to obtain high transmissivity. Additionally, for Layers 2 and 3, a metallic reflection layer was not needed and an AlN film with high thermal conductivity was formed next to each recording film. The AlN film suppressed the heat-induced damage of thin recording films. Consequently, the high transmissivities of 64% (Layer 1), 75% (Layer 2), and 81% (Layer 3) were achieved so that a quadruple layer disk with high quality was realized. The experimental disk showed tolerance to a wide range of writing speeds from $1\times$ (36 Mbps) to $4\times$ (144 Mbps). Good jitter values for each layer within an available maximum laser power of 27 mW on the disk were demonstrated. The acceleration test for lifetime using the Arrhenius plots showed that this write-once disk has an estimated lifetime of more than 100 years at 30 °C and 85% relative humidity (RH).
2008-09-25